A proposed vision and vehicle-to-infrastructure communication-based vehicle positioning approach

It is essential to obtain accurate location of vehicles for new applications of Intelligent Transportation Systems. To remedy the defects of present Global Positioning System and vehicle-to-infrastructure (V-I) positioning technology, a new positioning approach based on vision and V-I communication is proposed. This approach aims at lane-level positioning with lower cost than conventional ones. In this approach, the position of the vehicle is represented by its lateral position (the lane number) and longitudinal position (the distance from entrance of the road) in a course coordinate system along the road; the specific lane the vehicle is occupying (the lane number) can be judged using the information of lane lines detected by vision systems; then the distance to the vehicle is obtained by a Road Side Unit (RSU) during the V-I communication; and the longitudinal position is calculated. The error of the approach on typical operating conditions is analyzed, indicating that the new approach can achieve the accuracy of less than 0.31 m for straight road and 0.58 m for typical arc road with ultra-wideband communication and ranging technologies and rational arrangement of RSUs. The feasibility of this approach is presented.     

客运站到发线运用优化研究

为了合理编制客运站到发线运用计划,作者确定了到发线均衡性评价标准,建立了既满足到发线固定使用方案,又达到均衡使用到发线的多目标二次0-1规划模型;并以德州东站为实例,利用LINGO软件进行了求解与验证。     

中大型客滚船的线型与推进系统研究

本文介绍了当今世界上典型的中大型客滚渡船传统的线型设计方法和推进系统,以及近年来针对大型客滚渡船研发的新推进理念和方法。详细介绍这些新的推进理念,并将其与传统的方式进行比较,对将来的实际应用提出了建议。     

Environmental lumping for efficient fatigue assessment of large-diameter monopile wind turbines

Fatigue damage is one of the governing factors for the design of offshore wind turbines. However, the full fatigue assessment is a time-consuming task. During the design process, the site-specific environmental parameters are usually condensed by a lumping process to reduce the computational effort. Preservation of fatigue damage during lumping requires an accurate consideration of the met-ocean climate and the dynamic response of the structure. Two lumping methods (time-domain and frequency-domain) have been evaluated for a monopile-based 10 MW offshore wind turbine, both based on damage-equivalent contour lines. Fatigue damage from lumped load cases was compared to full long-term fatigue assessment. The lumping methods had an accuracy of 94–98% for the total long-term fatigue damage and 90% for individual wind speed classes, for aligned wind and waves. Fatigue damage was preserved with the same accuracy levels for the whole support structure. A significant reduction of computational time (93%) was achieved compared to a full long-term fatigue assessment. For the cases with 30° and 60° wind-wave misalignment, there was a mean underestimation of approximately 10%. Variations in penetration depth did not affect the selection of the lumped sea-state parameters. This work presents a straightforward method for the selection of damage-equivalent lumped load cases, which can adequately preserve long-term fatigue damage throughout the support structure, providing considerable reduction of computational effort.     

基于参数化船型的阻力优化研究

船型几何模型的参数化表达,是船型多学科设计优化的基础。其作用是为各学科分析和优化提供一个统一的几何模型,并根据各学科分析结果自动修改调整船体型线。文中尝试使用Friendship进行船体完全参数化建模,并使用该软件中的feature编程功能编程实现shipflow型值数据的提取;通过改变一系列重要的船型参数实现变换船型几何模型,以获得满足性能需求的船型。最后利用该软件的优化框架,采用切线搜索法 (Tangent Search, TSearch) 完成1300TEU集装箱船的兴波阻力优化,优化球首和前体船体曲面。结果表明,该参数化方法在改进船型水动力性能方面有很好的效果。     

铁路既有繁忙干线货运产品布局优化模型及算法

采用节点拆分的方式构建了既有繁忙干线货运产品网络，在此基础上按运输需求的特征对其分类并借鉴服务网络设计的思想，设计了既有繁忙干线铁路货运产品布局优化模型，采用免疫克隆变邻域搜索算法对模型进行求解，最后采用算例对模型和算法进行验证分析，测试结果表明模型和算法具有较好的适用性．     

黄河兰州市区雁滩段河堤设计综述

该文就黄河兰州市区雁滩段河堤的水利计算以及堤线布置、堤防高程确定、河堤挡墙结构型式等内容进行了介绍。     

肥大型浅吃水船舶的模型试验

考虑沿海运输船舶进江和降低运输成本的需要，对于优化的超浅吃水（Ｂ／Ｔ＝４．０）肥大型（ＣＢ＝０．８４）船型，给出了快速性的试验和耐波性的计算分析结果，以供船舶设计参考。     

三维地形可视化技术在铁路电力设计中的应用

三维地形可视化技术一直是地理信息系统、数字摄影测量、虚拟现实等领域的研究热点.铁路电力线路设计过程中,通过三维地形可视化技术,可以使设计人员对地形有较直观的认识,提高贯通线路设计的效率和质量.根据数字高程模型(DEM)数据,利用VC++6.0和OpenGL作为平台,重点讨论建立地形三维可视化系统的关键技术和实现过程.     

"天鲸"号大型自航绞吸式挖泥船

论文介绍了国内的第一艘自航绞吸式挖泥船"天鲸"号的主要要素、总布置概况、型线、柔性钢桩台车系统、输泥系统和推进装置,定性地探讨了它的艏部型线设计和灵活的输泥系统配置,对它的挖掘岩石能力作了计算.文中提出了法规对驾驶台翼桥宽度的要求,可供有关部门参考和探讨.