地铁车辆计算黏着系数的取值探讨

介绍了地铁车辆计算黏着系数取值的影响因素及计算方法,并根据广州地铁二号线车辆的情况举实例进行说明。     

Estimation of value of travel time reliability

In mode choice decision, travelers consider not only travel time but also reliability of its modes. In this paper, reliability was expressed in terms of standard deviation and maximum delay that were measured based on triangular distribution. In order to estimate value of time and value of reliability, the Multinomial and Nested Logit models were used. The analysis results revealed that reliability is an important factor affecting mode choice decisions. Elasticity is used to estimate the impacts of the different policies and system improvements for water transportation mode. Among these policies, decision maker can assess and select the best alternative by doing the benefit and cost analysis based on a new market share, the value of time, and the value of reliability. Finally, a set of promising policies and system improvement of the water transportation were proposed.     

Ramp meters on trial: Evidence from the Twin Cities metering holiday

Ramp meters in the Twin Cities have been the subject of a recent test of their effectiveness, involving turning them off for eight weeks. This paper analyzes the results with and without ramp metering for several representative freeways during the afternoon peak period. Seven performance measures: mobility, equity, productivity, consumers’ surplus, accessibility, travel time variation and travel demand responses are compared. It is found that ramp meters are particularly helpful for long trips relative to short trips. Ramp metering, while generally beneficial to freeway segments, may not improve trip travel times (including ramp delays). The reduction in travel time variation comprises another benefit from ramp meters. Non-work trips and work trips respond differently to ramp meters. The results are mixed, suggesting a more refined ramp control algorithm, which explicitly considers ramp delay, is in order.     

船舶锅炉水位控制仿真设计

从锅炉水位操纵模型进行建模，在WindowsNT环境下，利用VisualC＋＋编程对系统模型进行仿真，通过局域网下实时传递的数据实现锅炉水位模拟操纵的实时显示。     

铁路货物运输的随机过程分析和及时送达概率估计

应用随机过程理论，分析铁路运输系统中货物及时送达的概率分布，得到货物运输延续时间的平均值，为实现用户要求的运到期限提供了合理保证，并可通过评估与货主商定的运到期限与实际货物送达时间误差的概率，来找到货物及时送达过程中的关键环节，改进货物送达流程。最后举例说明它的应用。     

灌注桩深基坑的有限元计算及影响因素分析

对苏州市轨道交通2号线金民东路站深基坑使用灌注桩作为支挡结构的开挖、支护施工进行了有限元数值模拟,据此分析了灌注桩内力、水平侧移等随施工过程的变化以及主体结构的内力情况,并研究了灌注桩刚度、地基土刚度对支护结构侧移和弯矩的影响,对实际施工起到一定的指导作用。     

纵向碰撞下客车动作用力的预测

介绍了俄罗斯铁路客车纵向碰撞作用力的理论计算方法,并将仿真结果与实物试验进行了对比.     

基于虚拟样机技术的机车车辆钢弹簧疲劳寿命研究

机车车辆在轨道上运行时,线路的不平顺及车轮的变形会使悬挂装置受到各种有害冲击。断裂和应力松弛是机车车辆钢弹簧最常见的失效形式,有研究证明弹簧断裂绝大部分都是因疲劳引起的。发生松弛失效的弹簧没有及时更换,会给列车的安全运行埋下隐患,引发严重的行车事故。运用多体动力学软件SIMPACK建立整车模型．提取弹簧随机载荷谱,通过疲劳分析软件FE—Safe对某电力机车二系悬挂钢弹簧进行随机疲劳寿命分析,对轨道车辆钢弹簧寿命预测及确定更换周期具有一定的工程实用价值。     

深埋地铁车站人员紧急疏散计算

提出深埋地铁的新站型,进行紧急疏散演算, 探讨针对深埋地铁新站型的人员消防疏散的计算问 题,通过计算来验证和归纳深埋地铁站在建筑设计时 应重视的设计要点,为未来深埋地铁车站的设计提供 参考。将两座车站的客流代入两个深埋车站的新站型 中,根据国家标准和新地标的疏散公式进行计算。结 果表明: 首先,新站型的建筑形式是成立的,可以满足 国家标准疏散的要求; 其次,两个计算公式均反映了客 流与疏散设施的匹配度问题,当客流较大时,需增加通 行设施的数量以及缩短站厅层至站台层的距离来满足 疏散要求; 再次,通过北京新地标的公式计算发现,在两 种站型通行设施数量相同的情况下,影响深埋车站人员 疏散时间的两大因素是站厅至站台的距离和客流。     

单向非贯通节理岩体滚刀破岩 特性离散元模拟

相较于贯通节理,岩桥的存在使非贯通节理岩体受力破坏过程更加复杂。为探明其对破岩影响,通过采 用 PFC2D建立单向非贯通节理岩体滚刀破岩离散元模型,研究岩桥长度和倾角对岩体破碎模式、法向力、裂纹数 量及比能耗等参数的影响,揭示非贯通节理岩体滚刀破岩特性。研究发现：岩体以张拉破坏为主,节理对裂 纹扩展的“导向作用”明显,裂纹扩展方向总是趋向于和其距离最近的节理;竖向应力水平随节理倾角增加呈现 先增大后减小的趋势,在 45°倾角下达到最大值,应力区形状受到节理位置影响,两者具有一致性;完整岩体法 向力均值和峰值均大于节理岩体,节理对于破岩过程具有明显的促进作用;0°、60°、90°节理倾角下的比能耗值 明显低于其他节理组合,60°倾角下呈减小趋势,在岩桥长度为 25 mm 时取得最小值;0°、90°倾角下呈先减小后 增大趋势,在岩桥长度为 15 mm 时取得最小值。