Fuzzy and adaptive fuzzy control for the automobiles’ active suspension system

Two typical criteria for good vehicle suspension performance are their ability to provide good road handling and increased passenger comfort. The main disturbance affecting these two criteria is terrain irregularities. Active suspension control systems reduce these undesirable effects by isolating car body motion from vibrations at the wheels. This paper describes fuzzy and adaptive fuzzy control (AFC) schemes for the automobile active suspension system (ASS). The design objective is to provide smooth vertical motion so as to achieve the road holding and riding comfort over a wide range of road profiles. The efficacy of the proposed control schemes is demonstrated via simulations. With respect to the optimal linear quadratic regulator (LQR), it is shown that superior results have been achieved by the AFC.     

Non-stationary random vibration analysis of three-dimensional train–bridge systems

The quarter car model has been used extensively to study the benefits of active, semi-active and passive suspensions. Despite the evident simplicity of the model, the insights obtained from this model have been found to have counterparts in half- and full-car suspension models. Among the most interesting results of the analysis of the quarter car are the relationships among certain transfer function and invariant points in the frequency response functions. These results are of great interest for the application of linear control techniques to the design of active suspensions and the optimisation of linearised passive suspensions. This paper attempts to show why some of the limitations implied by the model are less absolute than they at first seem.     

Indirect method for wheel–rail force measurement and derailment evaluation

Wheel set flange derailment criteria for railway vehicles are derived and the influence of wheel–rail contact parameters is studied. An indirect method for wheel–rail force measurement based on these derailment evaluation criteria is proposed. Laboratory tests for the calibration of strain–force devices on the bearing box are carried out to determine the relationship between the applied force and the measured strain. The simulation package, SIMPACK, is used to develop a passenger car model to generate wheel–rail forces and vibration signals. Different cases are considered in this model to provide an accurate validation of the identified wheel–rail forces. A feasibility test is conducted in the Beijing Loop test line using a passenger car equipped with a set of strain gauges on the wheel set. The comparison of the force time history applied to the instrumented wheel set and that obtained using the indirect method is presented.     

浅论基于安全网络信息平台的客运专线综合监控系统

针对客运专线的特点以及中国铁路科技发展的目标，提出了集监测、控制和管理为一体的基于安全网络信息平台的安全监控系统的模型。并对客运专线环境下的综合监控系统的系统结构、主要功能和特点以及应用效果等展开论述。     

客运专线牵引变压器选型综合分析

在分析高速牵引负荷特性的基础上,基于为机车提供可靠供电和满足用电的相应国家标准和技术规则的综合要求,从电力系统、综合补偿、机车3个方面论及了客运专线牵引主变压器接线选型。     

大秦线开行2万t重载列车对湖东编组站到发场的影响

大秦线开行2万t重载列车,采用4台机车分散联挂的形式。湖东编组站重、空车到发场到发线的布置形式应为:2条重车线或2条空车线夹1条机走线为1束,每束到发线和机走线之间沿列车到达方向设置3处9号道岔,咽喉区至腰岔、每处腰岔和相邻的腰岔之间的有效长度为700m。以C76,C80及性能更好的适型车辆检算湖东站到发线有效长度,应达到2800m及以上。现有技术设备的特征、相邻线路技检作业分工方式、2万t重载列车的机车连挂方式、机车运用和组织方式、列车到达均衡程度、列检能力等是影响湖东站到发线通过能力的主要因素。应进一步优化和合理安排相关线路的行车组织方案,并对现行的技检作业分工方式和机车运用方案进行重新调整。采用重车方向列车在湖东站不换挂机车,各装车点到达湖东站的2万t、1万t列车均在装车地或集结地进行全面的技术检查方案。在此条件下,湖东站重车场到发线数量设置为6条基本可以适应远期大秦线运量的需求。     

货车转向架悬挂参数与运行性能研究

简要阐述了货车转向架的简化抗弯、抗剪、抗菱参数的概念,分析了其对车辆直线横向稳定性和曲线通过性能的影响。给出了H型构架式、三大件式转向架和径向转向架的简化抗弯、抗剪、抗菱刚度的计算公式。以此为基础,分析了我国货车转向架的发展与运用概况。最后提出了对货车转向架研制和进一步发展的建议。     

浅谈客运专线信息系统方案

本文结合铁路信息系统发展趋势及客运专线运营管理特点,提出客运专线信息系统方案。     

地铁车辆不锈钢车体的强度分析

结合国内某地铁车辆不锈钢车体,在分析其结构特点和不锈钢材料的力学性能的基础上,建立了车体结构的有限元模型,并借鉴国内外的地铁车辆技术标准和实际运行状态确定了载荷工况,分析了车体结构在各个工况下产生的应力、变形和模态。结果表明该不锈钢车体的强度满足要求。     

高精度A/D转换芯片ADS8364在数据采集系统中的应用

阐述“TCS2000大型养路机械电子插件自动测试台”大型测试系统中数据采集部分的硬件设计,介绍6通道16bit高精度AD转换芯片ADS8364的工作原理和基本使用方法,提供ADS8364与FPGA的接口电路、FPGA的相关设计流程.平台可以进行连续的多通道数据采集,整个系统工作状态稳定可靠.