多端点不成对机车周转图模型与算法

针对不成对列车运行图编制,在考虑最优性的要求条件下,本文提出适用于多端点不成对机车周转图的实用三步算法,即,首先确定机车交路成对时部分初始解,再分别确定每一个尚未匹配到达车次初始附挂方案,最后进行结果优化．文末提供一个算例,算例证明算法有效。     

内河船舶波浪载荷研究

利用内河波浪散布图和修订波浪谱对内河系列船舶进行了波浪载荷的计算预报,首次分析了内河船舶波浪载荷的规律和特点,并与俄罗斯内河登记局(RRR)和法国-德国船级社(B-G)的内河规范载荷对应的等效模数要求进行了比较分析。结合实船测试结果表明：波浪载荷变化规律与国外同类规范一致,预报波浪载荷水平与测试结果及国外同类规范要求相当。内河船舶波浪载荷预报应考虑航速和水深的影响,载荷预报结果可以作为制定内河波浪载荷公式的基础。     

铁路客车轮对踏面硌伤自动分析系统的研究与实现

为了解决客车轮对踏面硌伤人工分析效率低且质量不高的问题,基于大数据关联分析技术,构建了一套硌伤自动分析系统.从硌伤排查、自动分析、故障定位、统计分析4个方面分析系统的主要组成和功能,探讨了实现系统的关键技术.系统的应用提高了对客车轮对踏面硌伤分析和故障排查的效率.     

Evolving competition between Hong Kong and Shenzhen ports

Shenzhen Port (SZP), once a negligible local port, has risen dramatically to a world-leading container port and an “equal” player with Hong Kong Port (HKP). Will this market share reallocation continue, or will equilibrium be eventually realized for HKP to prosper continuously? We examine the relationship between these two ports to answer this question. We propose a new transformation method to describe the growth of container cargo transport demand, define the quantitative measures of the competition relationship and port competitiveness, and present a rigorous analytical framework with econometric tests and models to understand the true relationship between HKP and SZP. Direct empirical tests suggest that SZP complements HKP; however, the two ports exhibit strong competition when the effect of demand growth is excluded. Considering transshipment separately, we find that the impact of SZP on HKP is negative in transshipment but complementary in direct shipment. We may conclude that HKP does not affect SZP, whereas SZP has competitive power over HKP. These results are consistent with the findings of some previous theoretical studies.     

交通影响评价中的交通区分割方法研究

为了在交通影响分析中准确预测道路网络的宏观交通流和局部路口的微观交通流特征,开发了利用交通量分配模型和交通仿真技术组合分析交通影响的方法。首先在地理信息系统(GIS)的支持下,利用Voronoi图对交通小区进行几何分割,并借助GIS的空间聚合分析功能分割相应的属性数据,然后利用MCI(Multiplicative competitive interaction)模型推求新OD矩阵。从而使交通需求预测模型的输出结果可以直接作为交通仿真的初始数据,以便利用交通仿真技术实施关键路口的微观交通流分析。最后通过一个试验验证了方法的有效性和精度。     

桑塔纳2000型轿车电子温控器的优化设计

对某空调电子温控器的性能稳定性及抗干扰能力差等问题进行了分析,优化设计了电子温控器电路。根据抗干扰试验结果和实车上的性能表现证明,改进后重新设计的电路具有良好的效果。     

正确确定内燃机活塞上止点位置的热力学方法

本文详细介绍了利用局部曲线拟合的多变指数法修正示功图上止点位置的原理及特点,作者在数学处理上作了简化并编制了计算机程序及绘图程序,使之实际操作简单、便于应用。上止点位置的精度可达0.05°～0.1°CA,本文最后提供了一个实例说明该方法的具体应用。     

A combined use of phase plane and handling diagram method to study the influence of tyre and vehicle characteristics on stability

This paper deals with in-curve vehicle lateral behaviour and is aimed to find out which vehicle physical characteristics affect significantly its stability. Two different analytical methods, one numerical (phase plane) and the other graphical (handling diagram) are discussed. The numerical model refers to the complete quadricycle, while the graphical one refers to a bicycle model. Both models take into account lateral load transfers and nonlinear Pacejka tyre–road interactions. The influence of centre of mass longitudinal position, tyre cornering stiffness and front/rear roll stiffness ratio on vehicle stability are analysed. The presented results are in good agreement with theoretical expectations about the above parameters influence, and show how some physical characteristics behave as saddle-node bifurcation parameters.     

西安地铁隧道中隔墙加台阶法施工诱发的邻近桥桩变形及其控制措施

采用FLAC3D软件预测了地铁中隔墙加台阶法施工诱发的邻近桥桩变形规律,结果表明:桥桩最大水平变形和倾斜率均超出变形允许值,必须对既有桥桩采取加固措施才能确保其在地铁施工期间的安全使用。提出了采用袖阀管注浆技术控制桥桩变形的措施,并制定了现场监测方案。实测结果表明,加固措施能够确保桥桩变形在允许范围内,证明了提出的变形控制措施合理有效。