管窥美国密西西比河流域航运发展后的浅见和启示

密西西比河是河流资源综合利用开发的典范,其在平衡各种资源利用、保障河流生命力并使其资源可持续利用等方面做得较好,其中的航运资源得以较高程度的利用,对区域经济发展贡献度较大。我国目前正处在内河航运建设的高潮,密西西比河的成功经验值得借鉴。     

建立整数型轨道状态最优综合维修计划模型

为实现高效的轨道不平顺养护维修,建立最优养护维修计划模型和采用大型养路机械进行作业是十分重要的。本文以养护维修时间为决策变量,以年度轨道不平顺平均值最小为目标函数,在考虑了一系列约束函数的情况下,建立了整数型轨道状态最优综合维修计划模型。该模型能有效利用现场的养护资源,从安全和舒适的角度出发来制定养护计划,该模型的建立从理论上解决了轨道不平顺状态计算机辅助决策系统的关键问题。     

PMM tests in a circulating water channel and nonlinear analysis

As a result of frequent marine disasters leading to the loss of human life and pollution of vast areas of the ocean, ship manoeuvrability has become a very important characteristic of ship design. Among several recent experimental techniques to determine ship manoeuvrability, the most popular is captive model testing using a planar motion mechanism (PMM). This article describes some tests, analyses, and results of PMM tests in a circulating water channel (CWC) using a model of a training ship. The hydrodynamic forces and moments acting on a model of the training ship Shioji Maru in pure yawing motion were measured, and hydrodynamic derivatives were obtained using two different methods of analysis: singular value decomposition (a least-squares fit method) and Fourier analysis. Derivatives obtained from the tests were used to simulate the turning trajectory of the actual ship, and these were compared with the results of sea trials. The results indicate that both methods of analysis yield fairly similar derivatives. The simulation results were also found to be a close match with the trial results. Received: February 7, 2002 / Accepted: May 14, 2002 Address correspondence to: K. Shoji (shoji@ipc.tosho-u.ac.jp)     

新型区间信号双回路供电自动控制器的研制

简要介绍了研制双回路供电自动控制器的必要性,并对其工作原理、主要元器件的选择标准、整体功能等进行了讨论。     

故障区段判断和隔离方法

本文简要介绍了配线自动化系统中故障区段判断和隔离方法的基本原理,并论述了该方法的实施步骤。微机综合保护测控装置的直接I/O功能,使得将该方法用于地铁供电系统中成为可能。     

平面交叉口左转车道的几何设计方法研究

针对平面交叉口左转车道的设计方法进行研究,参考发达国家平交路口安全设计规范,分析现有的设计技术规范中不合理的因素,从左转车道的布置、车道宽度的确定、车道长度的确定、过渡段的设计等几个方面,进行了详细的分析研究,提出了平面交叉口左转车道的几何设计方法。     

掏挖法地下连续墙施工工艺的研究

在扩建和改建的地下工程中,经常遇见施工区域内存在大量纵横交错的地下管线,对这些管线的拆除,不仅严重影响工程进度和公用设施的正常运行,而且严重影响了施工工期,更带来巨大的经济浪费。该文阐述一种在不进行管线切改的前提下进行地下连续墙施工的特殊方法,旨在促进地下连续墙的施工工艺得到进一步完善和提高。     

Joint distortion model for progressive image transmission using error correcting arithmetic codes

A novel joint source channel distortion model was proposed, which can essentially estimate the average distortion in progressive image transmission. To improve the precision of the model, the redundancy generated by a forbidden symbol in the arithmetic codes is used to distinguish the quantization distortion and the channel distortion, all the coefficients from the first error one to the end of the sequence are set to be a value within the variance range of the coefficients instead of zero, then the error propagation coming from the entropy coding can be essentially estimated, which is disregarded in the most conventional joint source channel coding （JSCC） systems. The precision of the model in terms of average peak-signal-to-noise has been improved about 0.5 dB compared to classical works. An efficient unequal error protection system based on the model is developed, and can be used in the wireless communication systems.     

A new channel allocation scheme for hierarchical wireless networks

A channel allocation scheme for hierarchical wireless networks was proposed in terms of the connection-level quality of service. The channel allocation scheme was analyzed using both horizontal channel borrowing and vertical traffic overflowing. Pre-emptive priority strategies are used to classify real-time services and non-real-time services, real-time service is given higher priority for it is allowed to pre-empt channels used by non-real-time service. Some channel borrowing thresholds and acceptance ratios are used to avoid channel locking or dynamic power control, which can also be dynamically adjusted according to network load. Simula-tion results show that the proposed schemes can improve the system performance.     

对旧路加宽存在问题的研究

随着我国经济的迅速发展,一些现有公路已不能适应交通量增长的要求,需要扩大道路通行能力,面临改扩建问题,而新老路基结合处就成为路基施工的重点。结合大齐公路改建工程,分析了旧路路基施工时可能产生问题,提出合适的施工方案。通过研究找出有效避免施工过程中新旧旧路基结合部产生问题的原因,制定解决方案保证路基稳定性。研究成果对公路改建工程新旧路结合部的设计与施工具有借鉴意义。