北京地铁四号线车辆司机室后端墙系统防火设计

介绍了北京地铁四号线车辆司机室后端墙系统的基本结构,并通过试验验证该结构满足BS6853:1999标准中规定的防火性要求。     

强风区挡风墙高度和位置对接触网区域风速的影响

强风区挡风墙的修建能有效保障列车的正常安全行驶。而挡风墙高度和位置的变化直接影响到接触网区域的风速,因此是修建挡风墙时必须考虑的重要因素。采用高雷诺数κ-ε紊流模型,建立了列车分别位于1线和2线时的计算模型,应用计算流体动力学软件STAR-CD对接触网区域在强风区挡风墙作用下的风速和仰角进行了数值模拟计算,得出不同条件下接触网区域风速的分布数据。研究结果表明,挡风墙高度为3 m以上和距线路中心5 m时,是比较适合列车行走的位置。     

岸边起重机结构表面防腐涂料的发展趋势

良好的表面防腐涂装对保证岸边起重机金属结构长期安全有效工作十分重要。以氟碳面漆取代聚氨酯面漆,可显著提高漆面的耐久性、耐候性、耐腐蚀性,并具有优异的自清洁性和耐冲刷性。要保证氟碳面漆的优异性能,必须选用合适的树脂原料、颜料、溶剂和助剂,并在涂料的生产和涂装施工过程中严格执行工艺要求。     

冰粒参数对冰粒射流表面清洗性能的影响

根据射流对固体表面冲击时的流动过程分析,得出了冰粒射流对固体表面的作用不仅仅在冲击区,还包括附壁射流区的结论。由于冰粒是冰粒射流的关键,因而选用与冰粒相关的参数即其温度、粒径和流量作为影响因素,在射流的压力、靶距和横移速度一定的情况下,利用建立的冰粒射流系统进行了脱漆正交试验,目的是通过脱漆试验考察冰粒对其射流表面清洗性能的影响。试验数据的方差分析和直观分析表明：冰粒的温度和流量对冰粒射流表面清洗性能的影响是主要的,而粒径的影响是次要的。     

载人潜水器耐压球壳的多目标优化设计

采用基于响应面(RSM)近似模型和遗传算法(GA)对某深海载人潜水器耐压球壳进行多目标优化设计。首先建立深海载人潜水器耐压球壳的结构优化模型,通过试验设计(DOE)获得设计目标的响应特性,拟合得到响应面近似模型,最后采用Pareto遗传算法对响应面模型进行多目标优化求解,得到潜水器耐压球壳的优化设计方案。     

寒区公路隧道消防工程设计探讨

分析寒区公路隧道消防工程的现状,提出全新的消防设计方案,以解决寒冷地区冬季消防不可靠、费用高的问题.该设计方案可为类似工程提供一定借鉴.     

Fault tolerant nonlinear control with applications to an automated transit bus

This paper presents an integrated structure for a passive and active fault tolerant control (FTC) design approach in the framework of a robust nonlinear control technique called Dynamic Surface Control (DSC). As motivated by the automated vehicle application, we consider two categories of possible faults: pre-specified (a priori) and non-specified faults. It is first shown that DSC can be considered as a passive FTC approach in the sense that it gives simultaneous robust stability to a set of nonlinear systems even in the presence of model uncertainties and the pre-specified faults. Then, the non-specified fault is classified depending on the fault’s impact on the closed-loop system and isolatability from a fault detection and diagnosis (FDD) system. If a fault is both intolerable and isolatable, an active FTC approach is taken which includes FDD and controller reconfiguration. More specifically, trajectory reconfiguration is considered to accommodate the actuator fault, i.e., to compensate for the performance loss due to the fault within the framework of a switched hierarchical structure. Finally, the integrated structure for the longitudinal control of an automated transit bus is designed through the proposed method. Simulation results of the fault tolerant controller are shown for both single and multiple multiplicative faults. This controller was implemented on the California PATH transit buses in a demonstration of automated public transportation technology in San Diego, California in August of 2003.     

表面强化后的柴油机汽缸套/活塞环配副性试验分析

为提高柴油机汽缸套/活塞环摩擦副的耐磨减摩性能,延长其使用寿命,文中对经表面强化后的汽缸套、活塞环进行配副,组成9对摩擦副,通过试验,分析比较各摩擦副的摩擦系数、磨痕宽度、失重3个参数,得出最佳配副性组合为:气环镀CrTiAlN/缸套激光淬火+渗硫.