高速公路改扩建边坡工程的稳定性数值分析

针对某高速公路改扩建过程中对边坡工程的二次开挖卸荷的稳定性问题进行分析,采用有限元软件midas／gts对边坡的开挖支护过程进行模拟,得出了开挖边坡过程中的应力场变化规律,开挖同时应对边坡及时支护。并求得了支护后的边坡安全系数。     

化学灌浆技术在处理桥梁裂缝中的应用

采用化学灌浆技术处理桥梁裂缝,工艺简单易行,成本低廉,施工速度快,是值得推广应用的工程措施。文章结合岑梧高速公路大村大桥裂缝处理工程实例,介绍了化学灌浆技术的工作原理、技术特点和施工方法,为工程技术人员提供参考。     

交通建设项目资金监管模式探讨

文章通过对交通建设项目资金的特点分析,提出实施资金集中监管核算模式,实现对项目建设资金的全方位、全过程监控,盘活存量资金,提高建设资金的使用效率和效益,节约建设成本。     

鲜活农产品物流管理与运作分析

由于鲜活农产品的时效性、分散性,目前国内很少对这类产品物流进行系统研究;鲜活农产品物流的合理发展不仅促进农民经济收入,而且有效引导农村剩余劳动力转移。以寿光市蔬菜物流中心为例,分析了鲜活农产品物流现状和特点,提出了鲜活农产品物流运作模式,同时也为山东省发展农产品物流运作模式提出了建议。     

旧路加宽路面纵向开裂原因分析与防治

针对公路改建工程中出现的沥青路面纵向开裂这一常见现象,结合省道改建工程的设计特点与施工要点,重点就加宽路基部位与路面各结构层的施工质量控制方面进行分析和阐述,提出施工控制方法及相应的处理措施。     

土基模量对沥青路面性能影响分析

从沥青路面结构层施工质量控制、半刚性基层反射裂缝扩展、路面疲劳寿命三个方面分析了土基模量对半刚性基层沥青路面性能的影响规律,提出了沥青路面土基模量的合理设计和施工控制措施。     

埠阳庄大桥复杂地质条件下的桩基施工

埠阳庄大桥实际地质状况复杂,重点介绍该桥桩基施工中的相关准备工作以及对问题的分析和处理措施,为同类地质条件下梁桩基施工提供借鉴经验。     

Second best toll and capacity optimisation in networks: solution algorithm and policy implications

This paper looks at the first and second best jointly optimal toll and road capacity investment problems from both policy and technical oriented perspectives. On the technical side, the paper investigates the applicability of the constraint cutting algorithm for solving the second best problem under elastic demand which is formulated as a bilevel programming problem. The approach is shown to perform well despite several problems encountered by our previous work in Shepherd and Sumalee (Netw. Spat. Econ., 4(2): 161–179, 2004). The paper then applies the algorithm to a small sized network to investigate the policy implications of the first and second best cases. This policy analysis demonstrates that the joint first best structure is to invest in the most direct routes while reducing capacities elsewhere. Whilst unrealistic this acts as a useful benchmark. The results also show that certain second best policies can achieve a high proportion of the first best benefits while in general generating a revenue surplus. We also show that unless costs of capacity are known to be low then second best tolls will be affected and so should be analysed in conjunction with investments in the network.

Multi‐objective highway alignment optimization using a genetic algorithm

The available highway alignment optimization algorithms use the total cost as the objective function. This is a single objective optimization process. In this process, travel‐time, vehicle operation accident earthwork land acquisition and pavement construction costs are the basic components of the total cost. This single objective highway alignment optimization process has limited capability in handling the cost components separately. Moreover, this process cannot yield a set of alternative solutions from a single run. This paper presents a multi‐objective approach to overcome these shortcomings. Some of the cost components of highway alignments are conflicting in nature. Minimizing some of them will yield a straighter alignment; whereas, minimizing others would make the alignment circuitous. Therefore, the goal of the multiobjective optimization approach is to handle the trade‐off amongst the highway alignment design objectives and present a set of near optimal solutions. The highway alignment objectives, i.e., cost functions, are not continuous in nature. Hence, a special genetic algorithm based multi‐objective optimization algorithm is suggested The proposed methodology is demonstrated via a case study at the end.     

浅谈筑路机械设备管理

文章通过分析筑路机械设备管理的背景和意义,针对目前筑路机械设备管理存在的问题,提出了相关对策,为公路施工企业提高筑路机械设备管理水平提供借鉴。