多方式多类型交通分配模型(MMA)在收费型公路网中的应用研究

在对收费型公路运营模式进行研究的基础上,利用交通规划软件建立了基于广义费用的交通流量分配模型即多方式多类型交通分配模型,通过对模型参数的科学标定和网络的合理设置,得到各类车型在特定网络上的流量分配、路段饱和率以及通行费用,并对此模型的应用效果进行分析,最终为区域高速公路网规划、路段交通量预测提供依据。     

Multi‐objective highway alignment optimization using a genetic algorithm

The available highway alignment optimization algorithms use the total cost as the objective function. This is a single objective optimization process. In this process, travel‐time, vehicle operation accident earthwork land acquisition and pavement construction costs are the basic components of the total cost. This single objective highway alignment optimization process has limited capability in handling the cost components separately. Moreover, this process cannot yield a set of alternative solutions from a single run. This paper presents a multi‐objective approach to overcome these shortcomings. Some of the cost components of highway alignments are conflicting in nature. Minimizing some of them will yield a straighter alignment; whereas, minimizing others would make the alignment circuitous. Therefore, the goal of the multiobjective optimization approach is to handle the trade‐off amongst the highway alignment design objectives and present a set of near optimal solutions. The highway alignment objectives, i.e., cost functions, are not continuous in nature. Hence, a special genetic algorithm based multi‐objective optimization algorithm is suggested The proposed methodology is demonstrated via a case study at the end.     

公路基本建设项目设计阶段工程造价控制

公路工程造价控制,是工程项目管理的重要内容。文章分析了在公路基本建设项目设计阶段控制工程造价的重要性,阐述了设计阶段工程造价控制的必要条件,提出了对公路基本建设项目工程造价进行有效控制的措施。     

交通土建类工程造价专业工学结合人才培养模式研究

文章介绍了广西交通职业技术学院交通土建类工程造价专业工学结合人才培养模式的实践现状,分析了开展工学结合人才培养模式中出现的问题,提出了工学结合人才培养模式有效运行的措施。     

圭嘎拉高海拔隧道施工人员体力劳动强度评价

为探究圭嘎拉高海拔隧道施工人员体力劳动强度水平,评价施工工序劳动强度,选择圭嘎拉隧道进口段（海拔4 300 m）及1#斜井段（海拔4 560 m）的施工人员作为测试对象,分别测量不同工序下施工人员的生理指标（心率、血氧饱和度、耗氧量）。基于耗氧量计算能量代谢率,进而计算各工序的劳动强度指数。结果表明： 1）260 m的海拔高差造成的施工综合劳动强度指数差异具有统计学意义（P<0.05）; 2）二次衬砌钢筋绑扎是所测施工工序中劳动强度最大的工序,该工序下施工人员的心率、血氧饱和度和平均能量代谢率都出现超过卫生限值的情况,劳动强度指数达到35（极重）; 3）海拔为4 300~4 560 m时,隧道各施工工序劳动强度大部分为中度-极重度。     

存在饱和输入的欠驱动船舶航迹跟踪控制

针对控制输入存在饱和限制的欠驱动船舶的航迹跟踪问题,提出鲁棒饱和控制方法。以船舶纵向速度和艏向角速度为虚拟输入,设计饱和运动学控制器,并引入二阶滤波器形式对控制器进行简化;利用反步法并引入Nussbaum型函数,设计饱和动力学控制器,以实现对任意光滑航迹的跟踪控制,并保证跟踪误差收敛至零点附近的一个有界区域内。仿真算例验证了设计方法的有效性和鲁棒性。     

How do economies of density in container handling operations affect ships’ time and emissions in port? Evidence from Norwegian container terminals

Efficient port services are prerequisites for competitive and sustainable maritime transports. This paper makes advances in studying the determinants of the time that ships spend in port and the associated emissions to air. We estimate a production model for cargo handling based on a unique dataset containing each port of call at the largest container terminals in Norway in 2014. In turn, we use auxiliary engine emission factors to estimate particulate matter and nitrogen oxide emissions from ships at berth, to determine how the corresponding damage costs of air pollution vary with container throughput, location, and terminal investments. We find that Norwegian container terminals operate under increasing returns to density. Small ships that unload few containers are far from reaping economies of density, leading to high marginal time requirements for container handling and consequently high marginal external costs. From a Pigouvian taxation perspective, port charges should therefore be regressive in the number of containers handled. Moreover, we find that the external costs of maritime transports are severely understated when port operations are ignored. Our model allows determining the marginal productivities of port facilities. Thereby, it is instrumental in designing port charges that are diversified according to the quantity of containers handled and the service quality (i.e., the speed of handling operations). Regarding contextual factors, we find that establishing high-frequent liner services improves the ship working rate, while simultaneous calls at a terminal impede productivity. The type of container (loading/unloading; empty/laden) also appears to influence the duration of ship working.     

洋山深水港西港区岸线功能规划调整

为满足洋山深水港生产营运需要,有关部门希望保留颗珠山—蒋公柱潮流汊道,这与总体规划布置不一致。为此需进行深水港西港区岸线功能规划调整研究。考虑到汊道的颗珠山一侧潮流具有岬角绕流型特点,而蒋公柱一侧有岬角环抱型特点;在此认识基础上针对多种岸线方案进行试验。试验结果表明,采用岸线优化方案后,可以保持甚至改善汊道内和已建港区潮流条件。从水流角度看,采取合理的岸线布置和适当的工程措施后,保留和开发利用颗珠山—蒋公柱潮流汊道是可行的。     

基于模糊理论的船舶复合碰撞危险度计算

基于船舶领域和动界的概念,在船舶碰撞几何原理的基础上,利用模糊规则和模糊综合评价方法,本文提出一种船舶复合碰撞危险度的计算方法.确定最近会遇距离(DCPA)、最近会遇时间(TCPA)、两船距离、相对方位、船速比5个主要因素的隶属度函数,并考虑航行区域状况、能见度情况和船舶的操纵性能等对船舶碰撞危险度的隶属度函数修正.用原始数据对3种不同会遇态势进行仿真和对3种不同碰撞危险度计算结果分析比较,结果表明该方法的有效性.     

重载情况下船舶及主机加速问题分析

针对目前一些船舶在恶劣海况下遇到的加速问题,以及通过转速禁区时间过长的问题,从螺旋桨匹配和主机内部设计两方面进行原因分析。围绕转速禁区功率裕度,结合相关案例,从轻螺旋桨裕度、转速禁区及MAN主机输出扭矩能力等方面入手,提出改进措施。