Dynamic model for ride comfort evaluations of the rubber-tired light rail vehicle

The dynamic model was developed to evaluate vibration accelerations and ride comforts during the running of the Korean-standardised rubber-tired light rail vehicle. Ride comfort indexes were analysed and tested in accordance with UIC 513R by using the dynamic model and the actual vehicle in the test track. Based on the comparisons between analysis results and test results, the validity of the developed dynamic model was evaluated. It was verified whether or not the developed Korean-standardised rubber-tired light rail vehicle met the specified target specification on ride comfort. In addition, the influence of the wearing of guide wheels on ride comfort was estimated.     

Vertical random vibration analysis of vehicle–track coupled system using Green's function method

A vertical vehicle–track coupled dynamic model, consisting of a high-speed train on a continuously supported rail, is established in the frequency-domain. The solution is obtained efficiently by use of the Green's function method, which can determine the vibration response over a wide range of frequency without any limitations due to modal truncation. Moreover, real track irregularity spectra can be used conveniently as input. The effect of the flexibility of both track and car body on the entire vehicle–track coupled dynamic response is investigated. A multi-body model of a vehicle with either rigid or flexible car body is defined running on three kinds of track: a rigid rail, a track stiffness model and a Timoshenko beam model. The results show that neglecting the track flexibility leads to an overestimation of both the contact force and the whole vehicle vibration response. The car body flexibility affects the ride quality of the vehicle and the coupling through the track and can be significant in certain frequency ranges. Finally, the effect of railpad and ballast stiffness on the vehicle–track coupled vibration is analysed, indicating that the stiffness of the railpad has an influence on the system in a higher frequency range than the ballast.     

Investigation of the effects of sleeper-passing impacts on the high-speed train

The sleeper-passing impact has always been considered negligible in normal conditions, while the experimental data obtained from a High-speed train in a cold weather expressed significant sleeper-passing impacts on the axle box, bogie frame and car body. Therefore, in this study, a vertical coupled vehicle/track dynamic model was developed to investigate the sleeper-passing impacts and its effects on the dynamic performance of the high-speed train. In the model, the dynamic model of vehicle is established with 10 degrees of freedom. The track model is formulated with two rails supported on the discrete supports through the finite element method. The contact forces between the wheel and rail are estimated using the non-linear Hertz contact theory. The parametric studies are conducted to analyse effects of both the vehicle speeds and the discrete support stiffness on the sleeper-passing impacts. The results show that the sleeper-passing impacts become extremely significant with the increased support stiffness of track, especially when the frequencies of sleeper-passing impacts approach to the resonance frequencies of wheel/track system. The damping of primary suspension can effectively lower the magnitude of impacts in the resonance speed ranges, but has little effect on other speed ranges. Finally, a more comprehensively coupled vehicle/track dynamic model integrating with a flexible wheel set is developed to discuss the sleeper-passing-induced flexible vibration of wheel set.     

FTGS轨道电路继电器监测方案探究

针对广州地铁1号线FTG S轨道电路出现粉红光带或红光带故障情况,分析轨道电路继电器引起故障的原因,描述一种轨道电路继电器监测方案,给出了设计原理和实现方法。     

高压不对称脉冲轨道电路分线采集设备设计

随着高压不对称脉冲轨道电路的发展,迫切需要能够采集脉冲信号的轨道电路监测设备。基于TMS320VC33-120处理器,提出一种适用于高压不对称脉冲轨道电路的分线采集器。从硬件方案与软件设计两方面,详细介绍该设备的设计原理。测试结果表明,该设备能同时实现对高压不对称轨道电路送端、受端移频信号电压、载频、低频以及脉冲信号信息的采集,采集精度等各项指标基本符合要求。     

步履式顶推跨铁路钢箱梁施工技术

结合沈阳绕城高速公路后丁香大桥钢箱梁的施工,对步履式顶推法施工中的钢箱梁拼装平台的搭设、钢箱梁的拼装、临时墩设置、导梁拼装、顶推设备布设、顶推步骤及落梁作了简单叙述,并对顶推施工中的注意事项、控制措施、控制的重难点等进行了详细介绍,可为今后同类型桥梁的施工提供参考。     

Influence of uneven rail irregularities on the dynamic response of the railway track using a three-dimensional model of the vehicle–track system

A mathematical model of the vehicle–track interaction is developed to investigate the coupled behaviour of vehicle–track system, in the presence of uneven irregularities at left/right rails. The railway vehicle is simplified as a 3D multi-rigid-body model, and the track is treated as the two parallel beams on a layered discrete support system. Besides the car-body, the bogies and the wheel sets, the sleepers are assumed to have roll degree of freedom, in order to simulate the in-plane rotation of the components. The wheel–rail interface is treated using a nonlinear Hertzian contact model, coupling the mathematical equations of the vehicle–track systems. The dynamic interaction of the entire system is numerically studied in time domain, employing Newmark's integration method. The track irregularity spectra of both the left/right rails are taken into account, as the inputs of dynamic excitations. The dynamic responses of the track system induced by such irregularities are obtained, particularly in terms of the vertical (bounce) and roll displacements. The numerical model of the present research is validated using several benchmark models reported in the literature, for both the smooth and unsmooth track conditions. Four sample profiles of the measured rail irregularities are considered as the case studies of excitation sources, examining their influences on the dynamic behaviour of the coupled system. The results of numerical simulations demonstrate that the motion of track system is significantly influenced by the presence of uneven irregularities in left/right rails. Dynamic response of the sleepers in the roll direction becomes more sensitive to the rail irregularities, as the unevenness severity of the parallel profiles (quantitative difference between left and right rail spectra) is increased. The severe geometric deformation of the track in the bounce–pitch–roll directions is mainly related to such profile unevenness (cross-level) in left/right rails.     

Influence of some vehicle and track parameters on the environmental vibrations induced by railway traffic

A study is performed on the influence of some typical railway vehicle and track parameters on the level of ground vibrations induced in the neighbourhood. The results are obtained from a previously validated simulation framework considering in a first step the vehicle/track subsystem and, in a second step, the response of the soil to the forces resulting from the first analysis. The vehicle is reduced to a simple vertical 3-dof model, corresponding to the superposition of the wheelset, the bogie and the car body. The rail is modelled as a succession of beam elements elastically supported by the sleepers, lying themselves on a flexible foundation representing the ballast and the subgrade. The connection between the wheels and the rails is realised through a non-linear Hertzian contact. The soil motion is obtained from a finite/infinite element model. The investigated vehicle parameters are its type (urban, high speed, freight, etc.) and its speed. For the track, the rail flexural stiffness, the railpad stiffness, the spacing between sleepers and the rail and sleeper masses are considered. In all cases, the parameter value range is defined from a bibliographic browsing. At the end, the paper proposes a table summarising the influence of each studied parameter on three indicators: the vehicle acceleration, the rail velocity and the soil velocity. It namely turns out that the vehicle has a serious influence on the vibration level and should be considered in prediction models.     

Continuous approximation for skip-stop operation in rail transit

Operating speed of a transit corridor is a key characteristic and has many consequences on its performance. It is generally accepted that an increased operating speed for a given fleet leads to reduced operating costs (per kilometer), travel and waiting times (three changes that can be computed precisely), an improved comfort and level of service, which can attract new passengers who are diverted from automobile (items harder to estimate precisely). That is why several operation schemes which aim to increase the operating speed are studied in the literature, such as deadheading, express services, and stop skipping.A novel category of solutions to this problem for one-way single-track rail transit is to perform accelerated transit operations with fixed stopping schedules. The concept is quite simple: as the time required for stopping at each station is an important part of travel time, reducing it would be a great achievement. Particular operations that take advantage of this idea already exist. This paper focuses on one of them: the skip-stop operation for rail transit lines using a single one-way track. It consists in defining three types of stations: AB stations where all the trains stop, and A and B stations where only half of the trains stop (stations type A and B are allocated interchangeably). This mode of operation is already described in the literature (Vuchic, 1973, Vuchic, 1976, Vuchic, 2005) and has been successfully implemented in the Metro system of Santiago, Chile.This work tackles the problem with a continuous approximation approach. The problem is described with a set of geographically dependent continuous parameters like the density of stations for a given line. Cost functions are built for a traditional (all-stop) operation and for skip-stop operation as described above. A simple example is presented to support this discussion. Finally, a discussion about the type of scenarios in which skip-stop operations are more beneficial is presented.     

南京河西有轨电车路基设计特点

现代有轨电车作为新兴的城市轨道交通,与地铁、轻轨、高速铁路的设计有着众多方面的显著差别,在现有路基设计理论的基础上结合南京河西地区有轨电车的工程实践情况,研究阐明本项目沉降控制标准的确定依据、地基处理方案的主要影响因素、路基结构的设计参数,为制定有轨电车合理的设计标准提供参考。