浅埋小间距矩形顶管掘进姿态控制技术探讨

为解决采用结构分割转换工法（CC工法）建造的某地下停车场小间距隧道群矩形顶管施工中顶管机出现栽头及掘进姿态控制困难的问题,结合项目施工过程的姿态监控数据,对产生栽头及姿态偏差的原因进行理论分析,提出相应的控制技术,并采取现场试验的方法进行效果验证。结果表明： 1）顶管机栽头现象的原因主要有顶管机体重心偏差、漏浆、姿态预留不够、后靠不稳; 2）通过设备和管节定位处理、洞门密封处理、增加始发姿态预留量、后靠稳定性控制等措施可有效防止顶管机栽头; 3）始发阶段采取洞门预留、破除等控制措施,掘进阶段控制掘进速度并辅以“E”型导向槽进行轴线控制等措施,可有效控制顶管机顶进姿态; 4）通过采取调整铰接油缸行程差、主推油缸行程差及姿态偏差方向的土压等姿态纠偏技术措施,取得了良好的施工效果。     

结构分割转换工法在地下空间开发中的应用及设想

为了更加快速、安全、高效地完成城市地下空间开发,以结构分割转换工法（CC工法）为研究内容,从工法内涵、工程实践和应用推广3个角度展开研究。首先,基于ＣＣ工法的最新研究成果,从结构分割、建造方案及节点处理3个方面详细介绍CC工法的核心内容;然后,结合工程实践对该工法进行验证性研究,重点比较跨中设缝与柱顶设缝方案的优缺点,介绍该工程地下结构分割、转换的过程,最终证实CC工法建造地下空间的合理性、灵活性及适用性;最后,进行CC工法在富水地层中应用的可行性研究,通过对CC工法与明挖法、暗挖法、型钢混凝土、地面预制装配式结构等技术进行结合应用研究,得出在特定的工程条件下,CC工法也具有与其他先进工法结合应用的价值。     

压气条件下泥膜进气值测量试验研究

在压气条件下,进气是泥膜透气失效的起始点。为测量并研究泥膜在气压下的进气压力值（进气值）,通过自制的试验装置,在不同压气条件下对3种泥膜进行进气值测量试验。试验结果表明： 1)由闭气排水与固结排水的差值可以辨别泥膜是否进气,得到泥膜进气值; 2)采用泥膜特征孔径D90/2代入推导公式可近似计算泥膜进气值; 3)泥膜在不同压气条件下进气值不同,增压速率越低,泥膜进气值越大; 4)在较快和较慢的增压速率下存在进气值变化趋于稳定的现象,最大进气值为最小值的2倍以上。     

凿岩台车臂定位系统与液压臂结构不匹配问题研究

为解决凿岩台车臂定位系统与液压臂结构不匹配而出现液压臂下降时抖动、平动速度慢、泵压过高等问题,系统分析液压臂下降时抖动的原因,指出液压臂下降时抖动是由于液压臂下部液压缸平衡阀的先导油源压力不稳引起的,并通过试验证实,如果下降过程中下部液压缸平衡阀的先导油源压力一直大于其开启压力,液压臂能够平缓下降。可以通过提高液压臂油源压力和增大下部液压缸回油背压来解决液压臂下降抖动问题。     

Developing an enhanced weight-based topological map-matching algorithm for intelligent transport systems

Map-matching (MM) algorithms integrate positioning data from a Global Positioning System (or a number of other positioning sensors) with a spatial road map with the aim of identifying the road segment on which a user (or a vehicle) is travelling and the location on that segment. Amongst the family of MM algorithms consisting of geometric, topological, probabilistic and advanced, topological MM (tMM) algorithms are relatively simple, easy and quick, enabling them to be implemented in real-time. Therefore, a tMM algorithm is used in many navigation devices manufactured by industry. However, existing tMM algorithms have a number of limitations which affect their performance relative to advanced MM algorithms. This paper demonstrates that it is possible by addressing these issues to significantly improve the performance of a tMM algorithm. This paper describes the development of an enhanced weight-based tMM algorithm in which the weights are determined from real-world field data using an optimisation technique. Two new weights for turn-restriction at junctions and link connectivity are introduced to improve the performance of matching, especially at junctions. A new procedure is developed for the initial map-matching process. Two consistency checks are introduced to minimise mismatches. The enhanced map-matching algorithm was tested using field data from dense urban areas and suburban areas. The algorithm identified 96.8% and 95.93% of the links correctly for positioning data collected in urban areas of central London and Washington, DC, respectively. In case of suburban area, in the west of London, the algorithm succeeded with 96.71% correct link identification with a horizontal accuracy of 9.81 m (2σ). This is superior to most existing topological MM algorithms and has the potential to support the navigation modules of many Intelligent Transport System (ITS) services.     

Railway reforms: do they influence operating efficiency?

This paper considers railway operations in 23 European countries during 1995–2001, where a series of reform initiatives were launched by the European Commission, and analyses whether these reform initiatives improved the efficiency of the railway systems. Efficiency is measured using Multi-directional Efficiency Analysis, which enables investigation of how railway reforms affect the inefficiencies of specific cost drivers. The main findings are that the reform initiatives generally improve technical efficiency but potentially differently for different cost drivers. Specifically, the paper provides empirical evidence that accounting separation is important for improving the efficiency in the use of both material and staff costs, whereas other reforms only influenced one of these factors.

公路工程招投标实行履约保证金制度研究

目前我国公路建设市场广泛使用履约保证金制度,文章分析了履约保证金与投标保证金的差异及实行履约保证金制度的正面影响和负面效应,总结了加强保证金管理的相关措施,提出健全履约保证金制度的相关建议,对规范招投标市场行为和净化招投标市场环境以及预防和惩罚腐败都有着重要而深远的意义。     

船舶动力定位系统

船舶动力定位技术在航运业具有举足轻重的地位.介绍动力定位技术的发展历史,系统的结构组成、工作原理和工作模式,提出了动力定位技术的研究热点.     

“海洋石油201”深水起重铺管船动力定位系统设备配置研究

深水起重铺管船是深水油气资源开发的重要装备,其定位系统是起重铺管船的关键设备之一.本文对海洋工程装备动力定位系统的配置选型做了分析研究,并结合分析结果介绍了我国首艘深水起重铺管船“海洋石油201”的动力定位系统设备配置情况.     

信息化时代武器装备电磁兼容技术发展趋势

在C4ISR系统EMC和防护,EMC“预测分析法”设计与控制,电磁环境效应(E3)验证与评估及防护技术,频谱管理,以及EMC新技术、新材料、新器件开发应用等五个方面论述当前EMC技术的发展趋势。