ZYJ7型转辙机道岔启动电路改进研究

对铁路提速区段ZYJ7型转辙机道岔的启动电路进行改进,设计带有延时切断功能一体断相保护器(DBQ),在规定时间切断电机启动电路,防止道岔动作故障没有到位、到位后无表示、卡阻现象。在满足故障导向安全原则下节省一个时间继电器,简化启动电路。     

单线铁路CTCS-2级列控系统设计应用研究

CTCS-2级列控系统主要应用于双线铁路,在单线铁路中尚无工程应用先例,为解决单线铁路CTCS-2级列控系统应用存在的问题,在符合现行规范、不修改列控车载设备的前提下提出CTCS-2级列控系统总体方案。通过单线铁路与双线铁路的差异性对比分析,结合CTCS-2级列控系统功能需求,对闭塞方式、轨道电路配置、应答器设置、临时限速管理等特殊技术问题进行了研究并提出了解决方案。研究表明:CTCS-2级列控系统应用于时速200～250 km单线铁路能够实现列车高速安全运行。     

双弧型横向钢阻尼装置试验研究与应用分析

以商合杭客运专线颍上特大桥为工程背景,对双弧型横向钢阻尼装置的应用性能进行了试验研究.结果表明:双弧型横向钢阻尼装置具有较好的滞回特性,应用双弧型横向钢阻尼装置可以降低桥梁横桥向1阶频率,减小桥梁横向地震力,提高桥梁的抗震性能,但并未改变桥梁的振型特征.     

Validation of a dynamic mooring model coupled with a RANS solver

Standard design procedures and simulation tools for marine structures are aimed primarily for use by the offshore oil and gas. Mooring system restoring forces acting on floating offshore structures are obtained from a quasi-static mooring model alone or from a coupled analysis based on potential flow solvers that do not always consider nonlinear mooring-induced restoring forces, fluid structure interactions, and associated hydrodynamic damping effects. This paper presents the validation of a dynamic mooring system analysis technique that couples the dynamic mooring model with a Reynolds-averaged Navier-Stokes (RANS) equations solver. We coupled a dynamic mooring model with a RANS equations solver, and analyzed a moored floating buoy in calm water, regular and irregular waves and validated our motion and mooring force predictions against experimental measurements. The mooring system consisted of three catenary chains. The analyzed response comprised decaying oscillating buoy motions, linear and quadratic damping characteristics, and tensile forces in mooring lines. The generally favorable comparison of predicted buoy motions and mooring forces to experimental data confirmed the reliability of our implemented coupling technique to predict system response. Additional comparative results from a potential flow solver demonstrated the benefits of the coupled dynamic mooring model with RANS equations. The successful validated tool of coupling the dynamic mooring model with the RANS solver is available as open source, and it shows the potential of the coupled methodology to be used for analyzing the moored offshore structures.     

Reconfigurable Communication Processor： A New Approach for Network Processor

As the traditional RISC ASIC/ASSP approach for network processor design can not meet the today‘s requirements, this paper described an alternate approach, Reconfigurable Processing Architecture, to boost the performance to ASIC level while reserve the programmability of the traditional RISC based system. This paper covers both the hardware architecture and the software development environment architecture.     

A New Fine Damping Method for Solid ESG Rotor

Introduction The spin axis of ESG rotor will move alongclosed trajectories periodically after spin up, thetrajectories enclose either the maximum or theminimum principal axis of inertia depending on theinitial conditions, which is classical polhode mo-tion[1-4]. It is necessary to damp the polhode mo-tion to ensure that the spin axis is aligned with therotor maximum principal axis of inertia for ESGsignal readout. Passive damping and active damp-ing are two common schemes to fulfill this pro…     

LM331在内燃机车检测中的应用

本文给出一种应用于内燃机车水阻测试台的主电压检测电路,该电路使用廉价的单片V/F转换器,通过光电耦合方式,既保证了检测电压的精度,又可有效防止各种干扰串入计算机控制系统。     

On-line detecting of transformer winding deformation based on parameter identification of leakage inductance

Transformers are required to demonstrate the ability to withstand short circuit currents. Over currents caused by short circuit can give rise to windings deformation. In this paper, a novel method is proposed to monitor the state of transformer windings, which is achieved through on-line detecting the leakage inductance of the windings. Specifically, the mathematical model is established for on-line identifying the leakage inductance of the windings by applying least square algorithm （LSA） to the equivalent circuit equations. The effect of measurement and model inaccuracy on the identification error is analyzed, and the corrected model is also given to decrease these adverse effect on the results. Finally, dynamic test is carried out to verify our method. The test results clearly show that our method is very accurate even under the fluctuation of load or power factor. Therefore, our method can be effectively used to on-line detect the windings deformation.     

求解复合材料阻尼损失因子的有限元模态分析法

利用有限元模态分析方法计算复合材料的阻尼损失因子，并以美国某公司的研究项目为算例进行考核．与试验相比，结果是令人满意的．     

快速电磁阀驱动电路的分析与设计

本文指出了怏速电磁阀驱动电路的工作特点,并对其主电路的电源和开关元件进行了选择。进而分析了控制电路中的几个关键问题,给出了一个理想的快速电磁阀驱动电路。