总纵强度耦合作用下船体板架振动计算

船体在海上营运时，船体产生中拱状态弯曲和中垂状态弯曲，所以船体板架是处在复杂弯曲状态。以往船体板架振动计算都忽略了这种影响。本文讨论用有限元方法和原理应用于这类计算，推导了板架局部振动的计算方法，给出了计算实例。通过计算表明，本文方法可用于实际，为舰船振动校核计算提供了手段。     

关于海事人为因素的层次分析法

航海是一项有风险性的行业,船只在航行中遭遇自然灾害和意外事故导致人身和财产损失的情况是比较常见的。一直以来航运界都在企图找到发生海上事故的原因以减少损失、降低风险,在气候、环境、船舶结构、设备诸方面都做了研究,却收效甚微。其实再先进的船舶也得由人来操纵,人的素质高低对船舶航行的安全有着主要的影响。本文将探讨用层次分析法对导致海事发生的人为因素进行分析。     

Aggregate expenditure elasticity for transport and communication in Australia

For the purpose of estimating Engel elasticity, one needs to find the best functional form among various alternatives. In this paper, a new function, which is called the double semi-log Engel function turns out to be the best functional form for the transport and communication items in Australia on the basis of the distance function (D²) criterion, and the non-nested hypothesis testing procedure. This function is then used to estimate total expenditure elasticity, and the percentage change in consumer demand due to changes in total expenditure and total expenditure inequalities; using the 1975–76 Household Expenditure Survey data. The results of the analyses demonstrate that transport and communication is a necessary item in Australia on the basis of two criteria, viz., its elasticity is not significantly greater than unity, and the percentage change in demand increases with a decrease of the total expenditure inequality [emphasised by Iyengar (I960)]. Policy implication of the analyses has also been discussed.     

曲线弯梁桥振动理论分析

利用广义坐标法和能量原理推导曲线梁桥的振动控制微分方程,解释曲线梁桥振动理论与直线梁振动理论的异同点,在推导质量矩阵的显式表达式过程中考虑截面扭转中心与截面形心的不一致。随后给出了曲线梁动力分析的有限元方法,并完成了相应电算程序的编制。最后通过实例分析并验证本文所提计算理论和计算方法的正确性。     

量本利分析法在港口施工企业中的具体应用

在简要阐述量本利分析基本原理的基础上,运用该方法对某港口施工企业中商品砼业务进行具体分析,说明其在企业经营及决策中的作用。     

利用Boussinesq方程对作用于大直径圆筒结构上的波浪力进行数值模拟

采用求解Beji和Nadaoka改进的Boussinesq方程,模拟了波浪在多个串连大圆筒结构前的反射,得到了作用于圆筒结构上的波浪力。空间离散采用有限元方法,可以较好地适应圆筒结构表面形成的复杂边界形状。数值模拟结果与公开发表的物理模型试验成果进行了比较,符合较好。     

Neptune轮机模拟器的功能及应用

介绍了NORCON公司研发的Neptune模拟器的主要功能及功能的设计方案,剖析了其搭建框架,分析其故障设置及评分体系的机理,从而阐述了先进模拟器的现状、发展水平及趋势。     

《钢结构设计规范》在起重扒杆设计中的应用

在起重船扒杆设计中，现行《船舶及海上设施起重设备规范》没有提供直接强度计算方法，容易导致强度计算缺乏统一标准和审图产生困难。作者认为，《钢结构设计规范》（GB50017）提供的有关计算会式可作为船舶工程中起重扒杆以及其它压弯构件的计算方法。     

膜电解法处理含镍废水的技术经济性能研究

采用单阴膜电解法对含镍废水进行处理，在理论分析的基础上研究了电解液pH值、Ni^2＋浓度、电流强度等影响因素。实验结果表明，对于pH值为0．5-1．0、Ni^2＋的平均质量浓度为1400mg／L的含镍废水，在电解电流150mA、电压5V的条件下，控制电解时间为20-24h，调节电解液初始pH值为4，采用离子交换法将Ni^2＋富集到14000mg／L时，平均电流效率可达到90．7％，镍的平均去除率为88．7％，可比普通电化学法电流效率提高30％，节能50％以上。     

Second-order perturbation added mass fluctuation on vertical vibration of tension leg platforms

Total motion in waves can be considered as a superposition of the motion of the body in still water and the forces on the restrained body. In this study the effect of added mass fluctuation on vertical vibration of tension leg platforms (TLP) in the case of vibration in still water for both free and forced vibration subjected to axial load at the top of the leg is presented. This effect is more important when the amplitude of vibration is large. Also this is important in fatigue life study of tethers. The structural model used here is very simple. Perturbation method is used to formulate and solve the problem. First- and second-order perturbations are used to solve the free and forced vibrations, respectively.