利用钢轮托车辅助盾构机过站施工技术

针对地铁盾构法施工中盾构机通过满足过站要求的已完工车站进行二次始发这一常见施工环节,介绍一种通过钢轮托车辅助盾构机空载推进实现过站需要的施工技术及相应施工要点,如盾构机过站的施工工艺流程,钢板、钢轮拖车及轨道的铺设等。论述了利用钢轮拖车辅助盾构机过站施工技术采取的质量控制、安全措施及环保措施,分析了采用该技术的经济、社会和环境效益。     

施工坐标系在工程测量中的应用

介绍了施工测量工作中常用的施工坐标系转换以及放样程序在铁路站场工程建设中的具体应用,应用效果良好,通过工程实例证明运用施工坐标系定位放样在工程测量上的重要性。     

变频器输出电压du/dt对电机的影响及其滤波器的设计

研究了变频器输出电压du/dt对电机端电压和轴承电流的影响,在PSpice中建立了电机高频模型,并对端电压波形进行了仿真;着重研究了一种du/dt滤波器的参数设计方法,并且进行了仿真和实验验证。实践证明,该滤波器具有较好的滤波效果。     

地铁柔性接触网线岔检调标准的制定与应用

根据以往运行经验,结合西安地铁2号线的实际情况,从支柱定位、线岔交叉点、始触区、接触线高度、线岔定位拉出值等方面,对柔性接触网线岔的检调标准进行深入研究、分析并加以明确。将所定标准实际应用在西安地铁渭河车辆段接触网的建设中,顺利通过了接触网的冷滑、热滑试验及实际运行的考验。同时,将所定部分标准与国铁普速接触网线岔检调标准进行对比,以供有关接触网生产和技术人员参考。     

地铁车辆段电力外线及室外照明设计

通过对地铁车辆段电力外线的整合和规划,充分利用复杂狭窄的管线空间,使用不同的方式对室外各电力管线合理敷设,对各种敷设方式的利弊进行对比分析;阐述车辆段的室外照明设计,对今后的室外照明设计提出改进建议。     

地铁车辆段接触轨安全保障体系构建

研究深圳地铁3号线横岗双层车辆段接触轨区域安全保障体系的构建,从构建思路、构建原则以及体系架构等方面开展研究 系统介绍接触轨区域安全保障体系的内容,分析构建安全保障体系的意义,说明接触轨区域安全保障体系的建立对该技术在全国城市轨道交通系统中的安全实施与应用起到重要的指导作用.     

CARD/1系统在互通立交设计绘图上的应用与开发

通过对CARD/1系统在T型（Y型）互通式立体交叉设计绘图上的二次开发，使T型（Y型）互通式立体交叉的设计绘图达到一体化。     

Wheel-rail contact models for vehicle system dynamics including multi-point contact

Advanced modelling of rail vehicle dynamics requires realistic solutions of contact problems for wheels and rails that are able to describe contact singularities, encountered for wheels and rails. The basic singularities demonstrate themselves as double and multiple contact patches. The solutions of the contact problems have to be known practically in each step of the numerical integration of the differential equations of the model. The existing fast, approximate methods of solution to achieve this goal have been outlined. One way to do this is to replace a multi-point contact by a set of ellipses. The other methods are based on so-called virtual penetration. They allow calculating the non-elliptical, multiple contact patches and creep forces online, during integration of the model. This allows nearly real-time simulations. The methods are valid and applicable for so-called quasi-Hertzian cases, when the contact conditions do not deviate much from the assumptions of the Hertz theory. It is believed that it is worthwhile to use them in other cases too.     

Simulation on progressive collapse behaviour of whole ship model under extreme waves using idealized structural unit method

To ensure the safety of navigating ship, working loads and structural load-carrying capacity are two important aspects. In the present paper, a total simulation system combing load calculation and structural collapse analysis is applied to simulate progressive collapse behaviour of a single-hull Kamsarmax type bulk carrier. A three dimensional singularity distribution method is adopted to calculate pressure distribution with time history. A mixed structural model, collapse part simulated by ISUM elements and remaining part by elastic FEM elements with relative coarse mesh, is proposed for collapse analysis. Progressive collapse behaviour obtained by ISUM is good agreement with that by nonlinear software package, MARC. However, the calculation time of ISUM analysis is about 1/70 of MARC analysis. The applicability to structure system, high accuracy and sufficient efficiency of ISUM had been demonstrated.     

R/S分析法在盾构下穿机场过程中的地表变形规律研究

为保证机场的正常运营,在盾构下穿机场的施工过程中,对地表沉降变形控制的要求较高,因此对穿越过程中的施工控制和变形规律研究具有重要意义。首先,基于盾构下穿机场的工程条件,分析盾构下穿过程中的风险,并提出相应的控制措施;同时,根据现场监测数据,分析盾构下穿机场过程中的地表沉降变形规律,并利用R/S分析法对地表沉降的发展趋势进行研究。结果表明:盾构施工引起的机场地表变形均在控制值范围以内,且各监测点在不同序列条件下的Hurst指数均大于0.5,具有沉降持续减弱的趋势,验证下穿过程中风险控制措施的有效性,为类似下穿机场的盾构施工提供一定的实践经验,也为盾构施工引起的地表沉降变形规律研究提供参考。