重载列车纵向冲动机理及参数影响

利用重载列车空气制动与纵向动力学联合仿真系统,仿真计算列车制动过程中的冲动过程,发现纵向冲动是由冲击作用和挤压作用共同形成,最大车钩力就是这两者中力较大的一个.如果最大车钩力是由冲击力产生,则最大车钩力发生在列车尾部,反之最大车钩力是挤压力时,最大车钩力发生在列车中部.车钩间隙对列车纵向冲击力和挤压力都有影响,车钩间隙对冲击力的影响比对挤压力影响更大,对后部车辆的影响更显著;车钩间隙越大,最大车钩力越大.闸瓦摩擦系数对挤压力影响较大,对冲击力影响较小;摩擦系数越大,挤压力越大,发生车位越向前移.     

对开路面弯道制动ABS控制策略研究

在对开路面弯道制动工况下分析了轮胎受力情况,提出一种基于转角预测前馈、路径偏移量反馈的车辆最佳滑移率动态调节方法,在SIMPACK中建立汽车多体模型,在MATLAB/Simulink中搭建控制系统,并进行了虚拟在环试验。试验结果显示,与传统ABS相比,所提出的控制方法可以显著改善车辆的侧偏位移、横摆角速度以及制动时方向的稳定性,保证了制动效能,使车辆侧向稳定性得到显著提高。     

基于FMECA故障分析的高速动车组制动系统RAMS研究

高速动车组制动系统RAMS管理能够保证车辆在其全寿命周期内达到其功能要求。文章以CRH2型高速动车组制动系统为对象建立了可靠性模型,利用FMECA方法,系统地分析了制动系统的故障模式影响及危害性,并将其可能的故障模式按严重程度分类,以便采取改进措施。     

Design of rollover prevention controller with linear matrix inequality-based trajectory sensitivity minimisation

This paper presents a method to design a rollover prevention controller for vehicle systems. The vehicle rollover can be prevented by a controller that minimises the lateral acceleration and the roll angle. Rollover prevention capability can be enhanced if the controlled vehicle system is robust to the variation of the height of the centre of gravity and the speed of the vehicle. For this purpose, a robust controller is designed with linear matrix inequality-based trajectory sensitivity minimisation. Differential braking and active suspension are adopted as actuators that generate yaw and roll moments, respectively. The newly proposed method is shown to be effective in preventing rollover by the simulation on a non-linear multibody dynamic simulation software, CarSim^®.     

北京地铁新线100km/h车辆热容量问题分析

对北京地铁新线100 km/h车辆热容量问题进行了分析,对4种基础制动装置的配置方案进行了探讨。     

Limit braking of a high-performance motorcycle

A mathematical-model-based study of the limit braking of a high-performance motorcycle and rider is described. Front and rear brakes are operable independently. A dry road and high friction are presumed, such that full braking of the front wheel would lead to an overturn or ‘stoppie’ in colloquial parlance. Effective braking needs to maintain some loading on the rear wheel. A planar but otherwise detailed system model is set up and braking strategies for front and rear are devised. Parameters of the braking control schemes are derived with the help of an optimisation process, minimising the final speed in braking from high speed over a fixed time interval. Simulation results are examined critically and the strategy is developed until efficient use of the friction available is made. The nature of optimal braking events is demonstrated. The influences of slipper-clutch torque setting and the rear-tyre target load chosen are shown.     

Dynamics of railway wagons subjected to braking torques on defective tracks

It is well known that track defects cause profound effects to the dynamics of railway wagons; normally such problems are examined for cases of wagons running at a constant speed. Brake/traction torques affect the speed profile due to the wheel–rail contact characteristics but most of the wagon–track interaction models do not explicitly consider them in simulation. The authors have recently published a model for the dynamics of wagons subject to braking/traction torques on a perfect track by explicitly considering the pitch degree of freedom for wheelsets. The model is extended for cases of lateral and vertical track geometry defects and worn railhead and wheel profiles. This paper presents the results of the analyses carried out using the model extended to the dynamics of wagons containing less ideal wheel profiles running on tracks with geometry defects and worn rails.     

A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.     

制动力作用下简支梁结构动力响应分析方法

依据相关规范对制动力按最不利影响取值,根据Newmark-β数值积分方法编制程序,计算在列车制动力作用下多跨简支梁结构在不同影响参数（如制动速度、墩台刚度）下的纵向动力响应,以判断结构是否满足高速铁路运营的安全性要求。     

高速列车摩擦制动模拟试验研究

根据相似准则在MM 10 0 0型摩擦磨损试验机上进行高速列车摩擦制动模拟试验 ,研究了SiC颗粒增强铝基复合材料和铜基粉末冶金闸片配对时的制动摩擦性能 ,探讨使用铝基复合材料制动盘的可能性。模拟试验结果表明 :铝基复合材料制动盘和铜基粉末冶金闸片配副进行摩擦制动时具有制动温升低 ,摩擦因数稳定和耐磨性好的优点 ,能满足高速列车的制动性能要求