Consumer preferences for battery electric vehicles: A choice experimental survey in China

To accelerate the diffusion of battery electric vehicles (BEVs), consumer preferences for different products and policy attributes must be determined. Although previous studies have investigated consumer preferences for some product attributes, including purchase price, operation cost, driving range, and charging time, limited studies have discussed the broader aspects of product attributes, such as battery warranty and depreciation rate. Moreover, market-oriented incentives, including the personal carbon trading (PCT) scheme and the tradable driving credits (TDC) scheme, can theoretically be effective alternatives to expensive purchase subsidies. However, there is a lack of empirical evidence that confirms the influence of these two schemes on BEV adoption. To fill these gaps, we conducted a stated preference choice experimental survey in China and investigated the effect of product attributes, existing policy incentives, and two emerging market-oriented incentives on BEV adoption. Our results reveal that along with the main product attributes, battery warranty has a significant positive effect on inducing mainstream consumers to adopt BEVs while no preference difference occurs among existing policy incentives after purchase subsidies are abolished. For young consumers, almost all incentives that reduce the operation cost (e.g., PCT) or increase convenience (e.g., TDC) can increase their adoption of BEVs. These findings can provide important implications for the government with regard to designing novel incentives and promoting BEV adoption.     

考虑驾驶人风格的换道轨迹规划与控制（双语出版）

基于自动换道控制技术中融合个性化驾驶人风格的研究,建立考虑驾驶人风格的车辆换道轨迹规划及控制模型以提高换道规划控制模型对不同风格驾驶人的适用性,在保证安全性的基础上进一步满足驾驶人的个性化需求。首先通过问卷调查的方式采集得到了212份驾驶人风格量表数据,采用主成分分析法和K均值（K-means）聚类分析法将驾驶人按驾驶风格分为激进型、普通型和谨慎型,并通过驾驶模拟器试验采集不同风格驾驶人分别在自车道前车、目标车道前车和目标车道后车影响下的换道行为数据。然后对椭圆车辆模型进行改进,以描述不同风格驾驶人的行车安全区域,并据此构建3种典型工况下不同风格驾驶人的换道最小安全距离模型,结合驾驶舒适性约束、车辆几何位置约束以及不同风格驾驶人的换道行为数据,以换道纵向位移最短为目标,实现适应驾驶人风格的换道轨迹规划。最后以基于预瞄的路径跟踪模型作为前馈量,设计基于动力学的线性二次型最优（LQR）反馈控制器,通过调节控制权重矩阵实现3种工况下不同驾驶人风格的换道轨迹跟踪。PreScan和MATLAB/Simulink联合仿真结果表明：所设计的考虑驾驶人风格的换道轨迹规划及跟踪控制模型能够实现不同驾驶风格的自动换道轨迹规划及跟踪控制,可满足驾驶人个性化换道需求。     

Experimental study on the width of the turbulent area around bridge pier

At present, the method of calculating the turbulent flow width around the bridge pier is not given in the "Standard for Inland River Navigation" (GB50139-2004) in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouring around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred.     

挖入式港池泥沙淤积试验研究

在水槽试验的基础上,结合部分理论分析,初步研究了挖入式港池的泥沙淤积问题的原因、泥沙运动以及淤积特性。结果表明:含沙量分布具有一定的规律,口门处淤积量较大,泥沙粒径较粗,而港池内部淤积量较小,粒径较细。因此,采取适当措施减少该形式港池口门处的淤积是十分必要的。     

一种新型电动汽车电控系统示教装置设计

电动汽车的核心技术为“三电”技术,电控系统是电动汽车发展的关键技术之一。本设计以吉利EV450纯电动汽车的电控系统为研究对象,提出优化电动汽车电控系统的研究设计方案,以汽车电器技术为基础,以单片机为核心控制器,设计示教装置电路,实现对该系统的工作原理展示,模拟电动汽车电控系统的运行状态、信号处理及状态监控等功能。     

1Cr18Ni9Ti钢的抗冲击性能实验研究

材料本构关系的准确程度对结构数值仿真分析的结果影响很大。对于受冲击载荷的金属结构,材料特性还与应变率关系密切。通过分别采用Hopkinson压杆实验系统与WDW3050微控电子万能试验机进行了1Cr18Ni9Ti钢的动态与静态性能测试,得到了本构方程的表达式,为后续的结构抗冲击仿真分析提供了较为准确的数据。     

柱形弹性套胀紧联接试验研究

在柱形弹性套胀紧联接理论研究基础上,为了研究柱形弹性套上的螺栓拉力与柱形弹性套所能传递的最大扭矩之间的关系设计了一套试验方案。在自主开发的弹性套胀紧联接试验台上进行试验,用Matlab采集数据,根据试验结果,最终得到柱形弹性套的螺栓压力与最大传递扭矩之间的试验公式。     

问题式教学在《汽车构造》网络授课中的实践应用

文章通过对问题式教学的理论分析,结合疫情期间开展网络授课的教学过程,通过理论分析和实践教学来探索问题式教学在网络教学过程中的开展方式,以此构建基于网络教学“生成问题、回答问题、解决问题和检验问题”的问题式教学模式,从而提高网络授课的教学效果,培养学生自主学习的能力。     

基于岗位要求的高职《汽车保险与理赔》课程信息化教学改革研究与实践

文章基于汽车保险行业岗位要求,根据《汽车保险与理赔》课程特点和教学中存在的问题进行信息化教学改革,培养学生保险销售能力、承保核保能力以及查勘定损实际处理能力。此次改革增强了学生自主学习意识,提高了学习兴趣,实现以“学生为主,教师为辅”的教学模式,提升教学效果。     

Multisim在模拟电子技术设计性实验中应用的研究

根据实践性教学环节中开设设计性、综合性实验的要求,从实验方法和实验手段的改革出发,本文介绍了Muhisim2001软件及其在电子技术设计性实验中的应用．