液化天然气B型独立液货舱结构低周疲劳研究

基于某B型独立液货舱为研究对象,开展液化天然气(LNG)船码头装卸货工况下的结构应力和温度场热应力分析,重点针对液货舱水平强框处连接节点计算其因装卸货受力和温度变化所引起的疲劳累积损伤。研究结果表明,部分研究疲劳节点由装卸货产生的低周疲劳损伤在整个结构疲劳累积损伤中的占比较大,对结构疲劳损伤起主导作用,需要在液货舱疲劳强度分析中予以重点关注。因此,对此类B型独立液货舱进行结构设计必须考虑低周疲劳的影响。     

安全水平法在SOLAS 救生艇结构强度衡准制定中的应用

本文将安全水平法应用于SOLAS第III章救生艇结构强度衡准的制定。主要采用综合安全评估对救生艇结构强度相关的功能性要求进行衡准的初步制定,从而得出需要的安全水平。基于强度衡准理论分析、实艇试验和事故数据分析相结合的方式评估了现有救生艇结构强度的安全水平,对衡准的合理性提出修改的建议。研究结果为安全水平法在船舶技术标准制定和安全水平评估方面的应用提供了实际案例和使用建议。     

Comparative Analysis of Calculation Methods for Jacking Force of Jacking Pipes北大核心CSCD

Jacking force is the most important parameter in jacking pipe engineering, and reasonable calculation of jacking forces plays an important role in safe and smooth pipe jacking construction. There are many calculation methods for pipe jacking force at present, and the calculation results may be affected to some extent by different cal⁃ culation methods. For this reason, calculation methods of jacking force (frictional resistance) were collected and a comparative analysis was conducted with aspects to the advantages, disadvantages and applicabilities. The results show that as for the jacking force calculated by empirical formulae, the soil layer classifications corresponding to giv⁃ en frictional force per unit area and relevant factors to be considered are different, and the values of frictional force per unit area between pipe and soil in the same soil layer are also different; as for the jacking force calculated by theo⁃ retical formulae, the calculation methods for vertical earth pressure at crown are different and much effected by the pipe buried depth; as for the jacking force calculated by numerical simulation, the selected theories for the simula⁃ tion program and the construction factors to be considered during simulation are different. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Structural Optimization and Strength Analysis of the Lifting Arm of a Wet Shotcrete Spraying Unit北大核心CSCD

Wet shotcrete spraying units are widely used in underground engineering, for railways, highways, water conservancy and hydropower stations, municipal works, mining and military and other industries. Structural analysis and mechanical behavior optimization are conducted regarding the lifting arm of a TKJ series shotcrete spraying unit, and optimization of the hinge point position and working scope of the lifting arm is realized. The optimal layout scheme for the hinge force is given based on the Monte Carlo method, the hinge force of the lifting arm is improved for the mean and maximum values, and the maximum and average hinge force of the lifting cylinder decrease by 23.14% and 7.70%, respectively, compared with that of the original scheme. The static strength is checked using Ansys-Workbench for the optimized scheme, and the results show that the optimized scheme has a larger safety re-serve and that the structural design is more reasonable than the original scheme. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Simulating ad-hoc demand-responsive transportation: a comparison of three approaches

Transport models are used to evaluate new infrastructure and public transport services, varied levels of demand, and new ideas for demand management. Exploring these proposals virtually is easier than implementation and testing in situ. However, existing models are based around traditional forms of transportation. As part of a feature analysis using a case study approach, three different simulation packages (a simple custom-developed package, traffic microsimulation, and agent-based simulation) are used to develop and demonstrate simulations of demand-responsive transportation (DRT) and analyze the advantages and disadvantages of each simulation approach for evaluating DRT. While the simulations display some relational replication (meaning they produce similar relational patterns with respect to certain variables), they do not show distributional replication (that is, the value of the results is not statistically similar), meaning that under- or over-estimation of predicted travel could occur. Recommendations for the application of each modeling approach are made.     

Electric vehicles for greenhouse gas reduction in China: A cost-effectiveness analysis

There have been ongoing debates over whether battery electric vehicles contribute to reducing greenhouse gas emissions in China’s context, and if yes, whether the greenhouse gas emissions reduction compensates the cost increment. This study informs such debate by examining the life-cycle cost and greenhouse gas emissions of conventional vehicles, hybrid electric vehicles and battery electric vehicles, and comparing their cost-effectiveness for reducing greenhouse gas emissions. The results indicate that under a wide range of vehicle and driving configurations (range capacity, vehicle use intensity, etc.), battery electric vehicles contribute to reducing greenhouse gas emissions compared with conventional vehicles, although their current cost-effectiveness is not comparable with hybrid electric vehicles. Driven by grid mix optimization, power generation efficiency improvement, and battery cost reduction, the cost-effectiveness of battery electric vehicles is expected to improve significantly over the coming decade and surpass hybrid electric vehicles. However, considerable uncertainty exists due to the potential impacts from factors such as gasoline price. Based on the analysis, it is recommended that the deployment of battery electric vehicles should be prioritized in intensively-used fleets such as taxis to realize high cost-effectiveness. Technology improvements both in terms of power generation and vehicle electrification are essential in improving the cost-effectiveness of battery electric vehicles.     

输送成球黏土混砂土质对管线磨损的监测

吹填工程中,疏浚土对管线的磨损是工程实施的重要影响因素,目前针对成球黏土混砂土质对管线的磨损程度尚无相关研究。以厦门蔡庴工程统计数据为基础,对成球黏土混砂土质对管线磨损进行研究,分析不同部位的管线在该种土质情况下的磨损程度,并与定额中典型土质进行对比,确定出该种土质对管线的磨损,以此来指导管线的调整和优化安排。结论对类似工程有较高的指导意义,同时对管线的监测、对比、分析的方法具有普遍适用性。     

软土地基中格形地下连续墙护岸前沿土体加固参数研究

格形地下连续墙是一种新型直立式护岸结构,整体刚度大,辅之以护岸前沿的软土地基加固,能减少墙体水平位移,确保工程结构和周边环境安全。以某电厂取水口护岸工程为例,介绍格形地下连续墙结构在护岸工程中的应用,利用有限元分析软件Plaxis3D,采用土体硬化模型(HS模型)建立三维模型,给出加固参数设计方法,研究护岸前沿土体加固的面积置换率、加固宽度和加固深度对格形地下连续墙变形的影响。因软土地基上结构受软土强度参数的影响较大,故对软土强度指标和水泥土强度指标进行敏感性分析。     

带卸荷板的方块码头墙身位移对墙后土压力的影响

土压力与挡土墙体的位移密切相关,现行规范中采用主动土压力理论计算带卸荷板的方块码头墙后土压力是不完全准确的。根据此类码头结构特点,对地基条件好、基床厚度薄的方块码头墙身位移特性进行论述,对规范方法提出修正意见。依托于某工程实例,采用数值分析方法对码头墙身位移和墙后土压力进行模拟,并与规范公式计算结果进行对比,得出墙底处修正系数可取1.84,卸荷板处可取1.34,可为类似特点的工程土压力计算提供参考。     

长江南京以下12.5 m深水航道工程新型筑堤结构

针对长江南京以下12.5 m深水航道二期工程落成洲河段整治建筑物的特点,提出在堤高为3.0~6.5 m的堤段采取倒T型构件混合堤替代抛石斜坡堤的新型筑堤结构。对混合堤结构在波、流共同作用下的稳定性采用翻坝水流力和合田波浪力计算公式进行理论受力分析,并通过三维物理模型试验对波、流共同作用下混合堤结构稳定性进行验证,结果判定为稳定。新型倒T型构件混合堤减少块石用量,有利于缓解大宗石料供应难度,适应环保需求,同时减少水上施工时间,加快施工进度。该结构已成功申请实用新型专利,可为类似工程提供指导和借鉴。