水泥混凝土搅拌输送车液压传动系统设计

以8 m3水泥混凝土搅拌输送车为例,介绍了混凝土搅拌输送车驱动方案和液压系统主要参数的确定,传动系统原理图的拟定以及各液压元件的选型及功率、扭矩校核,并对整个系统的扭矩和功率流程进行了校核,保证了整个系统设计的合理性和可靠性.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

Model based urban traffic control,part II: Coordinated model predictive controllers

The present paper describes how to use coordination between neighbouring intersections in order to improve the performance of urban traffic controllers. Both the local MPC (LMPC) introduced in the companion paper (Hao et al., 2018) and the coordinated MPC (CMPC) introduced in this paper use the urban cell transmission model (UCTM) (Hao et al., 2018) in order to predict the average delay of vehicles in the upstream links of each intersection, for different scenarios of switching times of the traffic lights at that intersection. The feedback controller selects the next switching times of the traffic light corresponding to the shortest predicted average delay. While the local MPC (Hao et al., 2018) only uses local measurements of traffic in the links connected to the intersection in comparing the performance of different scenarios, the CMPC approach improves the accuracy of the performance predictions by allowing a control agent to exchange information about planned switching times with control agents at all neighbouring intersections. Compared to local MPC the offline information on average flow rates from neighbouring intersections is replaced in coordinated MPC by additional online information on when the neighbouring intersections plan to send vehicles to the intersection under control. To achieve good coordination planned switching times should not change too often, hence a cost for changing planned schedules from one decision time to the next decision time is added to the cost function. In order to improve the stability properties of CMPC a prediction of the sum of squared queue sizes is used whenever some downstream queues of an intersection become too long. Only scenarios that decrease this sum of squares of local queues are considered for possible implementation. This stabilization criterion is shown experimentally to further improve the performance of our controller. In particular it leads to a significant reduction of the queues that build up at the edges of the traffic region under control. We compare via simulation the average delay of vehicles travelling on a simple 4 by 4 Manhattan grid, for traffic lights with pre-timed control, traffic lights using the local MPC controller (Hao et al., 2018), and coordinated MPC (with and without the stabilizing condition). These simulations show that the proposed CMPC achieves a significant reduction in delay for different traffic conditions in comparison to these other strategies.     

Dynamic traffic metering in urban street networks: Formulation and solution algorithm

Traffic metering offers great potential to reduce congestion and enhance network performance in oversaturated urban street networks. This paper presents an optimization program for dynamic traffic metering in urban street networks based on the Cell Transmission Model (CTM). We have formulated the problem as a Mixed-Integer Linear Program (MILP) capable of metering traffic at network gates with given signal timing parameters at signalized intersections. Due to the complexities of the MILP model, we have developed a novel and efficient solution approach that solves the problem by converting the MILP to a linear program and several CTM simulation runs. The solution algorithm is applied to two case studies under different conditions. The proposed solution technique finds solutions that have a maximum gap of 1% of the true optimal solution and guarantee the maximum throughput by keeping some vehicles at network gates and only allowing enough vehicles to enter the network to prevent gridlocks. This is confirmed by comparing the case studies with and without traffic metering. The results in an adapted real-world case study network show that traffic metering can increase network throughput by 4.9–38.9% and enhance network performance.     

重载货车摩擦缓冲器阻抗特性的数值模拟

为预测摩擦缓冲器的实际工作状态,从几何特征和作用原理的角度,建立详细的MT-2型缓冲器理论模型。首先,通过对缓冲器内部各摩擦元件的运动学和静力学分析,推导出缓冲器在准静态下的阻抗特性;其次,引入附加摩擦系数量化各摩擦元件之间动静态摩擦过渡时的黏滞补偿,并模拟出缓冲器在动态下的阻抗特性;最后,利用C80型货车冲击试验数据对该缓冲器的理论模型进行验证。验证结果表明:总体上,数值模拟和现场试验下的缓冲器示功曲线基本吻合,说明模型的正确性;局部上数值模拟中缓冲器从加载Ⅰ阶段过渡至加载Ⅱ阶段的突变现象在冲击试验中表现的并不明显,还有待进一步完善。     

高速高频船舶舵机系统动态特性分析与研究

为船舶高速高频舵机的设计提供理论依据和技术支撑,提出了基于ADAMS、SIMULINK和AMESim的联合仿真分析的新方法,分析了船舶舵机分系统单元、非线性因素与整机系统动态特性的关系。基于ADAMS、SIMULINK和AMESim建立了船舶舵机系统联合仿真模型,从时频角度研究了变量泵、控制系统、反馈机构及传感器的特性,以及间隙、死区、泄露、灵敏度等非线性因素对舵机系统频响特性的影响关系和规律,得出了高速高频舵机设计的一般准则。     

带分布式动力吸振器基座振动传递特性研究

在弹性梁上等间距安装吸振器,构建带分布式动力器的基座系统,建立了Euler梁-吸振器-弹性支承耦合系统的力学模型。给出了子结构的导纳矩阵,推导了基座的动态特性传递方程,得到了基座系统的力传递率表达式,并详细讨论了系统参数对基座减振性能的影响。搭建了带分布式吸振器基座系统实验平台,对电阻应变式力传感器进行了标定,测试了基座的力传递率特性。数值仿真与实验测试结果均表明,带分布式动力吸振器基座在低频取得了优越的减振效果。     

基于MIMO法的行星齿轮减速器的模态试验

针对行星齿轮减速器,采用MIMO方法进行模态试验,将方案一(弹性绳悬挂)和方案二(弹性绳和充气轮胎混合支撑)两种形式下高频信号和低频信号得到的六组试验数据用LMS模态分析软件进行处理,得到七阶模态频率及其振型,及各阶模态的模态质量、模态刚度和模态阻尼等信息。最后分别对两种方案进行模态可信度和有效性分析,分析结果表明,两种方案在模态参数估计上都能取得相对合理的结果,方案二在获取低频模态信息方面效果较好,而方案一在获取高频模态信息方面效果较好,具体应用时应根据所关心的频段和模态参数选取不同方案的数据进行参考。     

海面浮标通信电波传播损耗研究与仿真

论文从海上无线电通信特点出发,采用Longley-Rice模型对海面浮标中继通信系统电波传输损耗进行仿真研究,确立了海面浮标通信与海洋环境及通信系统结构的关系,通过对海面浮标通信电波传播损耗进行研究,为浮标通信系统设计特别是对浮体结构设计提供必要的理论依据。     

Water Wave Scattering by a Nearly Circular Cylinder Submerged Beneath an Ice-cover

Assuming linear theory, the two-dimensional problem of water wave scattering by a horizontal nearly circular cylinder submerged in infinitely deep water with an ice cover modeled as a thin-elastic plat...