聚氨酯复合改性沥青的制备与性能研究

为改善聚氨酯(PU)改性沥青的性能,实现其在道路工程领域的应用,将PU、岩沥青(RA)和基质沥青(BA)按照自定的室内工艺流程制备得到PU复合改性沥青,并探讨了制备工艺参数的适宜性.采用针入度、软化点、延度和旋转黏度试验优化了PU和RA的掺配方案,基于胶体理论分析了PU复合改性沥青的温度敏感性;利用动态剪切流变(DSR...     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

预制桩在岩石地基中的应用

在淤泥层较厚持力层为岩石地基的地质条件下,常采用冲、钻孔灌注桩嵌岩,但在施工过程中塌方塌孔严重、安全性差,如何突破预制桩本身具有无法穿过孤石和滚石的特性,实现嵌岩是工程中需要研究的问题。结合实际工程设计与施工,根据工程地质和荷载情况,通过采用不同的桩体及桩靴形式,成功实现预制桩在岩石地基中嵌岩的目标。     

Mike21软件桩群概化方法在高桩码头中的应用

码头前沿水域的横流过大容易导致船舶撞击码头或系船缆绳断裂,进而引发安全事故,因此研究码头前沿水域的流场状况对码头轴线合理选取和船舶的安全靠泊有着非常重要的意义。基于桩群概化方法,采用Mike21软件中的三角形网格水动力模块(FM模块)对曹妃甸矿石一期、矿石三期高桩码头附近的流场进行了数值模拟,并与现场实测流速、流向进行对比验证,确定了模型中的桩群影响参数。在此基础上,深入研究相邻高桩码头桩群阻力对周边海域的影响,并对码头前横流进行计算和分析。此方法实施简单、计算效率高,对大范围海域影响研究结果合理,对高桩码头前沿水域有关流速、流向的计算结果更加准确,对码头轴线合理选取和船舶安全靠泊有重要的参考意义。     

基于超长嵌岩桩自平衡试验的风化岩层侧阻力值研究

通过东非某工程海上超长嵌岩灌注桩自平衡试验,探讨不同风化岩层的竖向抗拔侧阻力分布规律,得出如下结论:1)强风化砂岩侧阻力与位移拟合线性关系为:y=1.534 2x+180.48;2)中风化泥岩侧阻力与位移拟合线性关系为:y=0.954 5x+353.5;3)相对于中风化岩层,桩土相对位移对于强风化岩层阻力值更为敏感。     

The planning and analysis of a new group rapid transit system: the SkyCabs monobeam system in Auckland

This paper examines a case study of the SkyCabs system as a way to alleviate some of the traffic problems of Auckland, New Zealand. SkyCabs is an elevated two-way monobeam carrying light eight-seater cabs on tracks on each side of the beam, available on demand, providing fast, pollution-free, unimpeded travel above the footpath with panoramic views of the city. The aim of this study is to investigate the attractiveness of implementing the SkyCabs system to and from Auckland central business district (CBD) and Auckland international airport by examining four variables: different routes, different number of stops/stations, different passenger demand levels, and different number of cabs in the system. The analysis utilizes geographical information system and simulation tools for the various scenarios considered. The results show that it is possible to assess the cost–benefit of alternative routes in terms of those four variables and rate of return on investment.     

A model for the visualization and analysis of elevator traffic

ABSTRACT

Analysis of elevator traffic in high rise buildings is critical to the performance evaluation of elevator group control systems (EGCS). Elevator dispatching methods or parking algorithms in an EGCS can be designed or modified according to analyses of traffic flow. However, interpretation of traffic flow based solely on numerical data may not be explicit and transparent for EGCS experts as well as for other non-expert building administration. In this study, we present a model for visualization and analysis of elevator traffic. First, we present an alternative approach for traffic analysis which we call route visualization. In the proposed approach, we initially decompose elevator traffic into its component parts and investigate each component independently. Then, using superposition of components we obtain a reconstructed model of overall traffic. This modeling approach provides component-based traffic analysis and representation of routes with intensities through data visualization. In the second part we introduce a multi-dimensional analysis of time parameters in ECGS. This approach provides a comparative analysis of several control algorithms such as dispatch or park algorithms for different combinations of traffic components.     

穿越古滑坡川主寺隧道围岩破坏特征及稳定性研究

文章以川主寺隧道所处的工程地质条件为基础,通过现场调研分析了隧道围岩变形破坏形式主要为坍塌、掉块以及剥落.围岩稳定性三维有限元数值模拟结果显示,碎裂围岩自稳能力差,围岩变形以弹塑性变形、松弛变形为主;H型钢拱架支护结构对碎裂围岩稳定性起到积极的作用,并通过典型洞段现场位移监测数据分析结果得以证实.     

板裂围岩结构弯曲失稳分析

文章分析了板裂结构地质背景及板裂介质岩体特征,研究了板裂围岩破坏模式及力学机理,并结合工程实例,利用随机有限元模型对板裂结构屈曲破坏进行分析。     

软弱围岩隧道修建新方法——核心土加固变形控制法

2006年我国铁路系统相关施工单位开始接触变形控制法隧道施工技术,经过长达5年的基础理论学习研究与准备,在铁道部和兰渝铁路公司的支持下,2011年由中铁瑞威公司和意大利土力公司联合在兰渝铁路桃树坪隧道进行了中国首次隧道核心土加固变形控制法应用试验研究,并取得成功。文章通过工程实践,对桃树坪隧道的工程概况、地质问题、施工工艺、施工设备及核心土加固控制变形技术的应用效果作了较详细介绍。