公路滑坡处治工程的施工控制

详细介绍了排水设施、抗滑桩、预应力锚索、抗滑挡墙和注浆加固等滑坡处治工程的施工工艺要求，对公路工程滑坡的处治工程的施工有指导意义。     

柴油机喷雾撞壁的研究

综述了柴油机喷雾撞壁雾化的研究现状和发展 ,对柴油机撞壁雾化的撞壁模型及模拟、喷雾撞壁的特征、壁面温度对撞壁雾化的影响以及液膜的形成和流动等进行了全面的论述 ,介绍了一个燃烧系统设计的新概念 ,并指出了进一步研究的方向     

利用物理模型研究热扩散问题

山东威海华能电厂循环冷却水正态物理模型试验的目的是研究电厂设备冷却水排入海中后对海域及取水口的热污染问题,本文剖析了试验过程,内容包括电厂附近海域的自然条件分析、热扩散理论在模型中的应用、模型设计思想、试验设备量测系统与试验方法以及模型试验中需要探讨的问题。     

Global cutting-path optimization considering the minimum heat effect with microgenetic algorithms

This article considers microgenetic algorithms (GAs), which explore in a small population with a few genetic operators, for cutting-path optimization problems. The major difference between GAs and simple genetic algorithms (SGAs) is how to make a reproductive plan for an improved searching technique because of population choice. It is shown that GAs implementation reaches the near-optimal region much earlier than the SGAs approach, and the GAs give a better solution than simulated annealing (SA). The main objective was to determine what temperature distribution can be obtained from the solution of a travelling distributed heat source. The solution of the travelling heat source on nested raw plate provides information about the vertices of each nested part of the raw plate. From the fact that the initial temperature at a piercing point strongly depends on the heat flow which stems from the previous cutting contour, the temperature of all piercing points must be lower than the critical temperature after each cutting of the components of a part. The critical temperature is identified as the mechanical melting temperature of steels. A heuristic back-tracking method is introduced to find the near-optimum cutting path considering the minimum heat effect on deformation. The heuristic back-tracking method is incorporated with the GAs.     

A pseudofield model approach to simulate compartment-fire phenomena for marine fire safety design

In order to prevent the spread of marine compartment fires, it is necessary to understand the governing factors or characteristics of fire-spread phenomena. We present a pseudofield model approach to this problem. We first described a field model of turbulent heat convection based on a standard k – turbulence model. Two-dimensional numerical simulations of a two-linked compartment fire were carried out in order to predict the turbulent convection flow induced by the heat released from the fire. Then a more complicated fire-spread problem of multilinked compartment fires was analyzed by means of a zone model, in which the amounts of oxygen consumption and gas generation were solved by a gas-balance equations system. The effect of threshold conditions on fire propagation and the effect of the thickness of the heat insulation were investigated with numerical simulations.     

水火弯板建模系统研究

以逐步回归分析和改进的Ｂ－Ｐ神经网络两种方法为算法,基于Ｍｉｃｒｏｓｏｆｔ Ｖｉｓｕａｌ Ｂａｓｉｃ３．０软件平台,应用实船板样本数据,开发了水火弯板局部收缩量的建模系统。     

有移动热源的海上大空间通风技术研究

由于有某种热源在海上大空间内移动,使得大空间通风系统也与其他一般大舱空间的通风系统不同.目前国内外对海上大空间通风系统尚无明确的规范及要求.在对大空间通风进行模型试验研究和相应的计算机模拟计算基础上,确定大空间通风系统初步方案,为大空间通风系统设计提供科学合理的试验和理论依据.     

隧道仰坡开裂及偏压治理技术

隧道建设进入山区,仰坡开挖越来越高,而且洞口经常出现偏压现象,仰坡经常开裂失稳。应用锚索框架梁结合挡墙方案成功地解决了此类问题。     

路基塌方沉陷快速修复技术探析

在分析塌方沉陷发生发展规律的基础上，提出路基塌方、沉陷快速修复技术。研究表明，提高路基修复应急处理的主动性和科学性，可缩短由于塌方沉陷对交通造成的影响，减少由此带来的经济损失和社会影响，提高我国公路养护管理水平。     

天津海河隧道泡沫-水喷雾系统保温措施升级及改造

海河隧道泡沫-水喷雾系统在冬季寒冷条件下运行时，个别雨淋阀组出现局部结冰的现象，对隧道的安全运行造成一定影响。针对这一运营难题，通过现场实测温度及数据分析，对箱体保温进行散热量计算并实测加热功率，对隧道内不同部位的雨淋阀组制定不同的保温措施。得出如下结论： 1）寒冷地区隧道的泡沫-水喷雾系统雨淋阀组应考虑保温。 2）雨淋阀组的保温措施应结合实际情况，根据箱外温度，制定对应的保温措施。 3）洞口位置的雨淋阀组应设置电加热器保温。 4）设置电加热器的雨淋阀箱体，其热量损失与隧道内温度成反比；温度越低，散热量越大，能耗越大。