提高圩区自然抗洪排涝能力的探讨

本文结合无锡市圩区的自然条件．对圩区地面迳流成因及水量平衡、典型年份水位持续天数及对应降水量、排涝标准与圩区地面标高的关系等问题作了分析探讨；对提高圩区规划地面标准作了准优化计算。     

低噪声电站噪声测量问题

分析了现实采用的几种移动电站噪声测量方法，根据实际发展需要。针对噪声测量中存在的一些问题，提出了低噪声电站噪声测量方法的一些看法。     

偏压连拱隧道病害分析及治理措施

基于某高速公路偏压连拱隧道衬砌发生严重破坏和隧道上方发生较大规模的山体开裂等病害,采用地震CT手段对隧道周围的工程地质进行了探测;根据现场监测数据,分析了隧道支护结构的受力状态及其安全性;对复杂地质条件下两种典型的施工方案进行了动态施工的数值模拟,对比分析了不同施工方案对围岩稳定和衬砌受力的影响;探讨了衬砌发生严重破坏的原因,并提出了相应的治理措施。研究结果表明:连拱隧道内侧断裂带、上方松散层等不良地质条件和不合理的施工方案是导致隧道衬砌严重破坏和山体地表开裂的主要原因。研究结果为分析和治理偏压连拱隧道病害提供了依据。     

高速公路施工中的测量工作

根据高速公路施工建设过程中的测量工作的特点全面介绍了施工前各测量工作的方法、步骤和施工期间公路中桩、边桩的计算和放样方法,并且针对不同情况提出了放样点的检核方法.     

软土地基路堤临界高度确定方法探讨

软土地基上高速公路工程建设中存在路堤临界高度的现象,根据国内外已有的文献资料全面总结了路堤临界高度的3种确定方法:实测资料确定法、理论公式计算法和离心模型试验法。在此基础上,根据某高速公路的大量实测数据,利用多元线性回归分析方法,得到了一个路堤临界高度计算的经验公式,探讨了软土地基硬壳层和软土层厚度与路堤临界高度之间的内在联系。     

超深振捣条件下混凝土墙体模板侧压力的简化计算方法

超深振捣对混凝土成品质量有害无益,研究超深振捣引起模板侧压力增大的规律,可为规避其害提供依据。为此设计4个混凝土墙体试件,实测在浇筑过程中模板侧压力的变化情况。基于振捣液化和液体压力平衡理论,建立了超深振捣情况下混凝土模板侧压力计算模型,推导了计算公式,并与实验数据进行对比验证。研究结果表明,振捣深度是影响混凝土墙体模板侧压力的重要因素,本文提出的计算模型能很好地预测墙体结构超深振捣位置的模板侧压力。     

A regression and beam theory based approach for fatigue assessment of containership structures including bending and torsion contributions

Container shipping has been expanding dramatically during the last decade. Due to their special structural characteristics, such as the wide breadth and large hatch openings, horizontal bending and torsion play an important role to the fatigue safety of containerships. In this study the fatigue contributions from vertical bending, horizontal bending and torsion are investigated using full-scale measurements of strain records on two containerships. Further, these contributions are compared to results from direct calculations where a nonlinear 3D panel method is used to compute wave loads in time domain. It is concluded that both bending and torsion have significant impacts on the fatigue assessment of containerships. The stresses caused by these loads could be correctly computed by full-ship finite element analysis. However, this requires large computational effort, since for fatigue assessment purposes the FE analysis needs to be carried out for all encountered sea states and operational conditions with sufficient time steps for each condition. In this paper, a new procedure is proposed to run the structure finite element analysis under only one sea condition for only a few time steps. Then, these results are used to obtain a relationship between wave loads and structural stresses through a linear regression analysis. This relation can be further used to compute stresses for arbitrary sea states and operational conditions using the computed wave loads (bending and torsion moments) as input. Based on this proposed method for structure stress analysis, an efficient procedure is formulated and found to be in very good agreement with the full-ship finite element analysis. In addition it is several orders of magnitude more time efficient for fatigue assessment of containership structures.     

Hardware-in-the-loop testbed for evaluating connected vehicle applications

Connected vehicle environment provides the groundwork of future road transportation. Researches in this area are gaining a lot of attention to improve not only traffic mobility and safety, but also vehicles’ fuel consumption and emissions. Energy optimization methods that combine traffic information are proposed, but actual testing in the field proves to be rather challenging largely due to safety and technical issues. In light of this, a Hardware-in-the-Loop-System (HiLS) testbed to evaluate the performance of connected vehicle applications is proposed. A laboratory powertrain research platform, which consists of a real engine, an engine-loading device (hydrostatic dynamometer) and a virtual powertrain model to represent a vehicle, is connected remotely to a microscopic traffic simulator (VISSIM). Vehicle dynamics and road conditions of a target vehicle in the VISSIM simulation are transmitted to the powertrain research platform through the internet, where the power demand can then be calculated. The engine then operates through an engine optimization procedure to minimize fuel consumption, while the dynamometer tracks the desired engine load based on the target vehicle information. Test results show fast data transfer at every 200 ms and good tracking of the optimized engine operating points and the desired vehicle speed. Actual fuel and emissions measurements, which otherwise could not be calculated precisely by fuel and emission maps in simulations, are achieved by the testbed. In addition, VISSIM simulation can be implemented remotely while connected to the powertrain research platform through the internet, allowing easy access to the laboratory setup.     

双块式轨枕外形质量快速检测系统研制及应用

SK?2型双块式混凝土轨枕是高速铁路无砟轨道结构中的重要预制件,单一生产厂日均产量达到800~1400根,但目前的人工检测方式无法满足双块式轨枕的出厂检验要求。本文提出的双块式轨枕外形质量快速检测系统可满足TB/T 3397—2015《CRTS双块式无砟轨道混凝土轨枕》的出厂检验要求,与双块式轨枕生产线相匹配,大大提高了检测效率,实现了双块式轨枕全参数、自动化、智能化检测。检测数据自动上传至生产管理平台,可对双块式轨枕生产质量进行跟踪管理。     

向量法在不规则隧道边仰坡面积计算中的应用

根据隧道边仰坡三维坐标测量数据,通过计算边仰坡斜面和投影水平面的法向量,进而计算两面之间夹角的方法,反算边仰坡斜面面积,在类似不规则隧道边仰坡等斜面面积计算中具有广泛的应用价值。