Structural safety of trams in case of misguidance in a switch

Tram vehicles mainly operate on street tracks where sometimes misguidance in switches occurs due to unfavourable conditions. Generally, in this situation, the first running gear of the vehicle follows the bend track while the next running gears continue straight ahead. This leads to a constraint that can only be solved if the vehicle's articulation is damaged or the wheel derails. The last-mentioned situation is less critical in terms of safety and costs. Five different tram types, one of them high floor, the rest low floor, were examined analytically. Numerical simulation was used to determine which wheel would be the first to derail and what level of force is needed in the articulation area between two carbodies to make a tram derail. It was shown that with pure analytical simulation, only an idea of which tram type behaves better or worse in such a situation can be gained, while a three-dimensional computational simulation gives more realistic values for the forces that arise. Three of the four low-floor tram types need much higher articulation forces to make a wheel derail in a switch misguidance situation. One particular three-car type with two single-axle running gears underneath the centre car must be designed to withstand nearly three times higher articulation forces than a conventional high-floor articulated tram. Tram designers must be aware of that and should design the carbody accordingly.     

城市轨道交通线路起终点及延伸问题研究

城市轨道交通线路的起终点及预留延伸方案问题是线路选线的一项重要工作,线路的起终点将直接影响项目的建设规模、工程投资及近远期分界点。线路起终点应尽可能预留远期发展的条件。     

Dynamic model for ride comfort evaluations of the rubber-tired light rail vehicle

The dynamic model was developed to evaluate vibration accelerations and ride comforts during the running of the Korean-standardised rubber-tired light rail vehicle. Ride comfort indexes were analysed and tested in accordance with UIC 513R by using the dynamic model and the actual vehicle in the test track. Based on the comparisons between analysis results and test results, the validity of the developed dynamic model was evaluated. It was verified whether or not the developed Korean-standardised rubber-tired light rail vehicle met the specified target specification on ride comfort. In addition, the influence of the wearing of guide wheels on ride comfort was estimated.     

Indirect method for wheel–rail force measurement and derailment evaluation

Wheel set flange derailment criteria for railway vehicles are derived and the influence of wheel–rail contact parameters is studied. An indirect method for wheel–rail force measurement based on these derailment evaluation criteria is proposed. Laboratory tests for the calibration of strain–force devices on the bearing box are carried out to determine the relationship between the applied force and the measured strain. The simulation package, SIMPACK, is used to develop a passenger car model to generate wheel–rail forces and vibration signals. Different cases are considered in this model to provide an accurate validation of the identified wheel–rail forces. A feasibility test is conducted in the Beijing Loop test line using a passenger car equipped with a set of strain gauges on the wheel set. The comparison of the force time history applied to the instrumented wheel set and that obtained using the indirect method is presented.     

Vertical random vibration analysis of vehicle–track coupled system using Green's function method

A vertical vehicle–track coupled dynamic model, consisting of a high-speed train on a continuously supported rail, is established in the frequency-domain. The solution is obtained efficiently by use of the Green's function method, which can determine the vibration response over a wide range of frequency without any limitations due to modal truncation. Moreover, real track irregularity spectra can be used conveniently as input. The effect of the flexibility of both track and car body on the entire vehicle–track coupled dynamic response is investigated. A multi-body model of a vehicle with either rigid or flexible car body is defined running on three kinds of track: a rigid rail, a track stiffness model and a Timoshenko beam model. The results show that neglecting the track flexibility leads to an overestimation of both the contact force and the whole vehicle vibration response. The car body flexibility affects the ride quality of the vehicle and the coupling through the track and can be significant in certain frequency ranges. Finally, the effect of railpad and ballast stiffness on the vehicle–track coupled vibration is analysed, indicating that the stiffness of the railpad has an influence on the system in a higher frequency range than the ballast.     

Dynamic model for the wheel–rail contact friction

Accurately estimating the coefficient of friction (CoF) is essential in modelling railroad dynamics, reducing maintenance costs, and increasing safety in rail operations. The typical assumption of a constant CoF is widely used in theoretical studies; however, it has been noticed that the CoF is not constant, but rather depends on various dynamic parameters and instantaneous conditions. In this paper, we present a newly developed three-dimensional nonlinear CoF model for the dry rail condition and test the CoF variation using this model with estimated dynamic parameters. The wheel–rail is modelled as a mass–spring–damper system to simulate the basic wheel–rail dynamics. Although relatively simple, this model is considered sufficient for the purpose of this study. Simulations are performed at a train speed of 20 m/s using rail roughness as an excitation source. The model captures the CoF extremes and illustrates its nonlinear behaviour and instantaneous dependence on several structural and dynamic parameters.     

城市轨道交通运行服务效果策划与应用

在分析城市轨道交通发展现有问题和面临挑战的基础上，指出城市轨道交通需要充分考虑轨道交通出行者个性需求和更多相关利益者的服务需求，才能实现轨道交通与城市融合发展，提升城市轨道交通服务水平。通过分析现有城市轨道交通发展过程中存在的问题和不足，论述开展城市轨道交通运行服务效果策划工作的必要性，阐述城市轨道交通运行服务效果策划工作的内容和方法，并在乌鲁木齐城市轨道交通1号线中成功应用，可为其他城市轨道交通发展所借鉴和参考。     

Real-time automatic rescheduling strategy for an urban rail line by integrating the information of fault handling

In the operation of urban rails, faults are inevitable, which leads to deviation between the actual timetable and the planned timetable. In nowadays, timetable rescheduling strategies rarely integrate the information of fault handling. In this paper, we develop a real-time automatic rescheduling strategy, which integrates the dynamic information of fault handling. The rescheduled timetable is obtained by a mathematical optimization model, the constraints set of which is automatically generated and adjusted as more information of fault handling is feedback. Compared with the experience-based rescheduling methods, the automatic rescheduling strategy reacts more quickly, and uses the information of fault handling more efficiently. A simulation system for testing the automatic rescheduling strategy is built, which uses the data of the Beijing Yizhuang metro line. Via testing on the simulation system, the effectiveness and efficiency of the automatic rescheduling strategy are validated.     

Airline network choice and market coverage under high-speed rail competition

While the existing literature has focused on the short-term impacts, this paper investigates the long-term impacts of high-speed rail (HSR) competition on airlines. An analytical model is developed to study how an airline may change its network and market coverage when facing HSR competition on trunk routes. We show that prior to HSR competition, an airline is more likely to adopt a fully-connected network and cover fewer fringe markets if the trunk market is large. Under HSR competition, the airline will, for a given network structure, have a greater incentive to cover more fringe (regional or foreign) markets if the trunk market is large, or the airline network is close to hub-and-spoke. Further, the airline will, for any given market coverage, move towards a hub-and-spoke network when the trunk market is large, or the number of fringe markets covered by the airline network is large. Both effects are more prominent when the decreasing rate of airline density economies is large. We further show that HSR competition can induce the airline to adopt network structure and market coverage that are closer to the socially optimal ones, thereby suggesting a new source of welfare gain from HSR based on its long-term impacts on airlines. Implications for operators, policy makers and specific countries (such as China) are also discussed.     

城市轨道交通财务可持续发展探讨

虽然各城市的财政状况及轨道交通企业体制存在一些差异,但由于城市轨道交通本身的特性,大部分项目都面临着资本金不足、还本付息压力巨大、运营收支无法匹配等问题。从目前我国城市轨道交通财务方面的现状入手,分析其中存在的问题,并从投融资、成本控制、政策扶持等方面提出具体实施建议:减轻轨道交通企业债务成本,采取措施降低运营企业的成本负担,给予轨道交通企业必要的税费优惠政策,建立合理的票价调整机制,实现轨道交通企业收入来源多样化,建立政府购买服务的机制。