连拱隧道施工技术

针对连拱隧道的施工工艺复杂,中隔墙衬砌容易开裂和渗漏水的特点,介绍了连拱隧道的施工方法,分析了连拱隧道中隔墙衬砌容易开裂和渗漏水的原因,提出了防排水施工的方法及防治渗漏水的措施,可供类似工程施工中参考.     

建筑物受深基坑开挖影响的显式差分分析

在基坑开挖过程中，临近重要建筑物的保护是一个重要的研究课题，通过天津地铁营口道车站深基坑开挖的模拟分析可以看出，地表沉降、墙体变位、基坑隆起三者之间存在着明显的关系，临近基坑建筑物沉降变形与其基坑的接近度有明显关系，施工过程中应综合考虑技术可行性、安全、环保、质量、工期、效益等因素采取保护措施。     

大断面地铁车站隧道软弱围岩渐进破坏规律模型试验研究

以贵阳市地铁2号线阳明祠车站为背景,采用室内模型试验模拟大断面地铁车站施工过程中隧道塌方破坏过程,明确施工期间大断面隧道塌方破坏过程机制,对比分析围岩和路面的变形。结果表明:通过围岩重力作用模拟隧道施工过程中塌方过程,与实际塌方过程基本吻合,弥补了常规加载破坏的不足;围岩渐进破坏过程表现为裂隙出现-裂隙发展-裂隙贯通-围岩塌方,支护渐进破坏过程表现为变形缓慢增加-变形快速增加-裂缝快速发展-支护破坏;围岩渐进破坏与支护渐进破坏相互作用,共同发展;在实际施工过程中,当支护变形大幅增加时,应增加支护强度,同时还应及时注浆、打设长锚杆,以减缓围岩裂隙发展,阻断围岩渐进破坏过程。     

轨道客车不锈钢车体电化学钝化工艺研究

文章通过显微组织、显微硬度、电化学性能表征测试,分析了不锈钢车体焊缝及热影响区的组织变化及性能差异,研究了钝化道次、移动速度等电化学钝化工艺参数对焊接接头及热影响区耐蚀性的影响规律.试验结果表明:焊接热影响区显微组织发生明显改变,显微硬度下降,表面耐蚀性明显下降,当以10 mm/s单道次钝化作业时,点蚀电位最高,耐蚀性最好,30天盐雾试验后,钝化处理表面未发现明显锈蚀.该工艺已在公司进行了推广应用,效果良好.     

城市轨道交通钢轨电位和新型回流装置研究

以成都地铁为例,基于钢轨绝缘节的老化和单向导通装置频繁导通问题,将车辆段及停车场等效为小电阻接地支路进行仿真。仿真结果表明,小电阻接地支路可使正线钢轨电位最大提升27.2 V,威胁了正线的安全运营。据此提出一种应用于车辆段与停车场的新型钢轨回流装置,并介绍其控制方法。该新型钢轨回流装置具有辅助列车安全通过绝缘节遏制车辆段与停车场内杂散电流、评估钢轨绝缘节绝缘性能和测量出入段线钢轨过渡电阻的功能。     

高架快速路上跨宝鸡东编组站方案比选

宝鸡市斗中路高架快速路,跨越宝鸡东编组站的10股轨道线和铁路专用线,同时桥下的城市主干路以框架桥的形式下穿宝鸡东编组站。桥位处需保留现状的地面交通、铁路框架桥和周围的高层建筑,桥址处空间局促,建设条件复杂,导致桥梁墩位布置困难。桥梁的布置方案与施工方案相互影响和制约。上跨方案是控制整条快速路的关键节点。综合考虑主墩的合理位置、恰当的孔跨布置和适宜的施工方案,对矮塔斜拉桥、刚构桥等方案进行详细的对比分析,确定采用(97+97)m的转体刚构桥方案。该方案的安全性和经济性均较优。该桥方案的研究过程和方法,为类似的复杂城市环境下,建设高架桥梁跨越铁路编组站提供参考和借鉴。     

Fast-charging station choice behavior among battery electric vehicle users

This study explores how battery electric vehicle users choose where to fast-charge their vehicles from a set of charging stations, as well as the distance by which they are generally willing to detour for fast-charging. The focus is on fast-charging events during trips that include just one fast-charge between origin and destination in Kanagawa Prefecture, Japan. Mixed logit models with and without a threshold effect for detour distance are applied to panel data extracted from a two-year field trial on battery electric vehicle usage in Japan. Findings from the mixed logit model with threshold show that private users are generally willing to detour up to about 1750 m on working days and 750 m on non-working days, while the distance is 500 m for commercial users on both working and non-working days. Users in general prefer to charge at stations requiring a shorter detour and use chargers located at gas stations, and are significantly affected by the remaining charge. Commercial users prefer to charge at stations encountered earlier along their paths, while only private users traveling on working days show such preference and they turn to prefer the stations encountered later when choosing a station in peak hours. Only private users traveling on working days show a strong preference for free charging. Commercial users tend to pay for charging at a station within 500 m detour distance. The fast charging station choice behavior is heterogeneous among users. These findings provide a basis for early planning of a public fast charging infrastructure.     

A cost-competitiveness analysis of charging infrastructure for electric bus operations

This study investigates the cost competitiveness of different types of charging infrastructure, including charging stations, charging lanes (via charging-while-driving technologies) and battery swapping stations, in support of an electric public transit system. To this end, we first establish mathematical models to investigate the optimal deployment of various charging facilities along the transit line and determine the optimal size of the electric bus fleet, as well as their batteries, to minimize total infrastructure and fleet costs while guaranteeing service frequency and satisfying the charging needs of the transit system. We then conduct an empirical analysis utilizing available real-world data. The results suggest that: (1) the service frequency, circulation length, and operating speed of a transit system may have a great impact on the cost competitiveness of different charging infrastructure; (2) charging lanes enabled by currently available inductive wireless charging technology are cost competitive for most of the existing bus rapid transit corridors; (3) swapping stations can yield a lower total cost than charging lanes and charging stations for transit systems with high operating speed and low service frequency; (4) charging stations are cost competitive only for transit systems with very low service frequency and short circulation; and (5) the key to making charging lanes more competitive for transit systems with low service frequency and high operating speed is to reduce their unit-length construction cost or enhance their charging power.     

Local joint flexibility of tubular X-joints stiffened with external ring or external plates

In the present paper, the Local Joint Flexibility (LJF) of the ring-stiffened X-joints and plate-stiffened X-joints under compressive load is investigated. In the first phase, a finite element (FE) model was generated and verified with the results of available experimental tests and equations. In the next phase, a set number of 234 FE models were created to evaluate the role of the external ring size (β_r and τ_r), the external plate size (β_p and τ_p), and the connection geometry (γ, τ, and β) on the LJF factor (f_LJF). In these FE models, the weld connecting the chord and brace members was generated. The results indicated that the f_LJF of a plate stiffened joint can be down to 76% of the f_LJF of the corresponding un-stiffened joint. Also, the effect of the ring size on the f_LJF was more than the effect of the plate size on the f_LJF, because of the stiffener position. Despite the notable effect of the ring and the plate on the f_LJF, there is not any study or formula on tubular connections stiffened with ring or plate. Therefore, the FE results were used to propose two parametric formulas for determining the f_LJF in X-joints with external ring or external plate under brace compressive load. Moreover, the derived formulas were checked based on the UK DoE acceptance criteria.     

基于PLC的模糊频载调节器设计

介绍可编程序控制器(PLC)实现船舶电站模糊调频调载的软硬件实现方法,采用离线计算、在线查表的方法在PLC上实现模糊控制,利用硬件在环仿真进行试验研究,结果表明,智能频载控制器具有较好的稳、动态性能。