Travel time estimation from sparse floating car data with consistent path inference: A fixed point approach

Estimation of urban network link travel times from sparse floating car data (FCD) usually needs pre-processing, mainly map-matching and path inference for finding the most likely vehicle paths that are consistent with reported locations. Path inference requires a priori assumptions about link travel times; using unrealistic initial link travel times can bias the travel time estimation and subsequent identification of shortest paths. Thus, the combination of path inference and travel time estimation is a joint problem. This paper investigates the sensitivity of estimated travel times, and proposes a fixed point formulation of the simultaneous path inference and travel time estimation problem. The methodology is applied in a case study to estimate travel times from taxi FCD in Stockholm, Sweden. The results show that standard fixed point iterations converge quickly to a solution where input and output travel times are consistent. The solution is robust under different initial travel times assumptions and data sizes. Validation against actual path travel time measurements from the Google API and an instrumented vehicle deployed for this purpose shows that the fixed point algorithm improves shortest path finding. The results highlight the importance of the joint solution of the path inference and travel time estimation problem, in particular for accurate path finding and route optimization.     

Liner shipping network design with emission control areas: A genetic algorithm-based approach

To curb emissions, containerized shipping lines face the traditional trade-off between cost and emissions (CO₂ and SO_x) reduction. This paper considers this element in the context of liner service design and proposes a mixed integer linear programming (MILP) model based on a multi-commodity pickup and delivery arc-flow formulation. The objective is to maximize the profit by selecting the ports to be visited, the sequence of port visit, the cargo flows between ports, as well as the number/operating speeds of vessels on each arc of the selected route. The problem also considers that Emission Control Areas (ECAs) exist in the liner network and accounts for the vessel carrying capacity. In addition to using the MILP solver of CPLEX, we develop in the paper a specific genetic algorithm (GA) based heuristic and show that it gives the possibility to reach an optimal solution when solving large size instances.     

长大货物车适应THDS轴温探测技术的研究

针对不适应THDS轴温探测系统的长大货物车,分析论证了现车轴箱改进方案适应THDS轴温探测的不足,并提出了轴箱优化方案。经计算、试验和装车验证表明,新轴箱可行、有效、安全,满足THDS轴温探测要求,保证了长大货物车运输安全。     

深圳地铁永磁同步牵引系统研究分析

牵引传动系统是轨道交通车辆装备实现机电能量转换的“心脏”单元,其性能在某种程度上决定轨道交通车辆的动力品质、能耗和控制特性,是轨道交通车辆节能升级的关键系统。而永磁同步牵引系统以其高效率、高可靠性和低能耗的优势特点,受到轨道交通行业的密切关注。文章阐述深圳地铁10号线永磁同步牵引系统批量装车概况,重点分析永磁同步牵引系统组成及优势,指出推广应用永磁同步牵引系统的经济和社会效益显著。     

考虑空车调配协调的货物列车开行方案优化研究

为实现空车调配与货物列车开行方案协调优化，结合基本运行图架构与车流径路，构建货运时空服务拓展网络。考虑配空与装卸取送、集编发等环节的时间接续要求，节点与区段不对流空车要求，以重车流全程运送与空车配送等广义总费用最少为目标，建立整数规划弧路模型。针对既有算法设计局限性，结合重车或空车配空的时间接续要求，提出将不同的 k 短路重车流方案与空车配空方案相关联的改进可行解构造方法，设计混合差分进化求解算法。实例研究表明，考虑空车调配进行重车、空车流组织协调优化，能够减少空车走行费用，及时满足装车需求，有效保证作业车流配合中转车流集结编组及时挂线，提高方案可实施性。     

船舶推进同步电机PTI/PTO模式研究

PTI/PTO推进是最近发展起来的一种新型船舶推进方式,兼具传统柴油机推进和电力推进优点,可实现多种船舶工作模式,具有操控性好、安全、经济等特点,将是未来船舶推进方式发展方向之一.本文介绍了PTI/PTO推进模式理论和工作模式,便于理解该推进方式,希望有助于船舶推进技术的发展.     

Dynamic traffic metering in urban street networks: Formulation and solution algorithm

Traffic metering offers great potential to reduce congestion and enhance network performance in oversaturated urban street networks. This paper presents an optimization program for dynamic traffic metering in urban street networks based on the Cell Transmission Model (CTM). We have formulated the problem as a Mixed-Integer Linear Program (MILP) capable of metering traffic at network gates with given signal timing parameters at signalized intersections. Due to the complexities of the MILP model, we have developed a novel and efficient solution approach that solves the problem by converting the MILP to a linear program and several CTM simulation runs. The solution algorithm is applied to two case studies under different conditions. The proposed solution technique finds solutions that have a maximum gap of 1% of the true optimal solution and guarantee the maximum throughput by keeping some vehicles at network gates and only allowing enough vehicles to enter the network to prevent gridlocks. This is confirmed by comparing the case studies with and without traffic metering. The results in an adapted real-world case study network show that traffic metering can increase network throughput by 4.9–38.9% and enhance network performance.     

重载货车摩擦缓冲器阻抗特性的数值模拟

为预测摩擦缓冲器的实际工作状态,从几何特征和作用原理的角度,建立详细的MT-2型缓冲器理论模型。首先,通过对缓冲器内部各摩擦元件的运动学和静力学分析,推导出缓冲器在准静态下的阻抗特性;其次,引入附加摩擦系数量化各摩擦元件之间动静态摩擦过渡时的黏滞补偿,并模拟出缓冲器在动态下的阻抗特性;最后,利用C80型货车冲击试验数据对该缓冲器的理论模型进行验证。验证结果表明:总体上,数值模拟和现场试验下的缓冲器示功曲线基本吻合,说明模型的正确性;局部上数值模拟中缓冲器从加载Ⅰ阶段过渡至加载Ⅱ阶段的突变现象在冲击试验中表现的并不明显,还有待进一步完善。     

Does transport help people to gain employment? A systematic review and meta-analysis of the empirical evidence

ABSTRACT

The role of transport in providing access to employment has received considerable attention. Since transport policies may be motivated by assumed effects on employment probability outcomes, it is important to establish the nature of the relationship between transport and employment outcomes. While the majority of the empirical evidence suggests a positive association, it is not conclusive or consistent and often shows mixed results. To address this confusion, our study has systematically reviewed this evidence base and synthesised it through meta-analysis. We first identified 93 studies that quantitatively assessed the impact of transport on employment outcomes. By systematically merging the empirical evidence, this study establishes a positive association between transport and employment outcomes, with varying effects for four identified categories of transport measures (or combinations thereof): car ownership, public transport access, commute times, and job accessibility levels. This positive association persists in studies that control for endogeneity between transport and employment, but a larger evidence base is needed to establish a more robust relationship, in particular for cities and smaller (rural) areas outside the US-context and with regard to public transport. We then selected 20 methodologically comparable studies for inclusion in the meta-analysis. Our meta-regression models clearly demonstrate that car ownership significantly increases individual employment probabilities, in particular among welfare recipients. Young drivers benefit from access to household cars when these are not in use by their parents, and they are more sensitive to the time and cost implications of longer commutes. While our systematic review suggests that better access to public transport and higher levels of job accessibility increases employment probabilities, meta-regression analysis requires more consistent transport measures. The findings in this study are important for policymakers in that they imply that job seekers may benefit from public policies targeted at improving their access to public transport, in particular for people without access to cars and in areas with fewer job opportunities.     

Heteroscedastic Gaussian processes for uncertainty modeling in large-scale crowdsourced traffic data

Accurately modeling traffic speeds is a fundamental part of efficient intelligent transportation systems. Nowadays, with the widespread deployment of GPS-enabled devices, it has become possible to crowdsource the collection of speed information to road users (e.g. through mobile applications or dedicated in-vehicle devices). Despite its rather wide spatial coverage, crowdsourced speed data also brings very important challenges, such as the highly variable measurement noise in the data due to a variety of driving behaviors and sample sizes. When not properly accounted for, this noise can severely compromise any application that relies on accurate traffic data. In this article, we propose the use of heteroscedastic Gaussian processes (HGP) to model the time-varying uncertainty in large-scale crowdsourced traffic data. Furthermore, we develop a HGP conditioned on sample size and traffic regime (SSRC-HGP), which makes use of sample size information (probe vehicles per minute) as well as previous observed speeds, in order to more accurately model the uncertainty in observed speeds. Using 6 months of crowdsourced traffic data from Copenhagen, we empirically show that the proposed heteroscedastic models produce significantly better predictive distributions when compared to current state-of-the-art methods for both speed imputation and short-term forecasting tasks.