工程机械柴油机的匹配选择

为选择适应工程机械使用特点的柴油机，对工程机械配套的柴油机选型方式进行了概括分析，着重介绍在柴油机对比选择时的关键性能参数。说明了工程机械用柴油机抗过载能力的特殊要求，总结出通过性能参数和曲线的对比来匹配选择柴油机的方法。     

杭州湾跨海大桥70 m预应力混凝土箱梁用海工耐久混凝土的试验研究

通过平板抗裂试验,研究了海工耐久混凝土的早期抗裂性,采用RCM法研究了海工耐久混凝土抗氯离子渗透的能力。结果表明,使用P.Ⅱ42.5(R)硅酸盐水泥、Ⅱ区中砂、5~25 mm碎石、Ⅰ级或Ⅱ级低钙粉煤灰、粒化高炉矿渣粉及新一代高性能高效减水剂,可以配制出C 50~C 60海工耐久混凝土。     

评价沥青胶结料疲劳性能的试验方法

主要介绍了国外研究较为成熟的两种评价沥青胶结料疲劳性能的试验方法,以及两种方法的试验原理和过程,并分析了G＊sinδ与DER指标在评价疲劳性能方面的有效性.     

清水冲刷河床调整过程试验研究

通过沙质河床清水冲刷水槽试验,对河床纵剖面的调整、沙波尺度、粗化层厚度及其与沙波运动关系、粗化层级配、推移质级配等进行了观测分析,进一步揭示了清水冲刷,河床重建平衡的机理。水槽试验表明,沙质河床清水冲刷,上游河段比降调平,床沙粗化,沙波发育,河床阻力增大,水深增大,流速减小,导致河床供沙能力削弱,输沙能力降低,冲刷向不冲刷转化。     

基于层次灰色模型的铁路技术创新绩效综合评价

运用技术创新基本理论,结合铁路技术创新实际,从效益(经济、社会)增长、市场状态(市场份额、市场营销)改善和创新主体素质(技术装备水平、管理水平)提高3个方面建立了评价铁路技术创新绩效的多级指标体系。将层次分析法(AHP)和灰色系统理论结合起来建立了层次灰色评价模型(HGM),运用该模型对铁路技术创新绩效分别从整体和分项进行了综合评价,得出:铁路技术创新绩效绩优度为“一般”,其主要原因在于铁路运输市场状态改善中市场份额扩大程度较低。实证分析结果表明:改进层次灰色评价法(层次灰色评价模型)为一种评价铁路技术创新绩效的有效方法。     

Using longitudinal methods for analysis of a short-term transportation demonstration project

This paper documents an application of panel, or longitudinal data collection in the evaluation of a TSM (Transportation Systems Management) demonstration project. The project was a four-week demonstration of staggered work hours in downtown Honolulu during February–March 1988. The 4 wave panel survey elicited commuting experiences of approximately 2,000 downtown employees at two week intervals before and during the project. The sample involved both employees who participated in the project by shifting their work hours, and those who did not. The panel survey was augmented by floating-car observations of travel times on major routes into downtown Honolulu on the same four dates.The purpose of the analysis was to determine whether employee commute times were affected, and if so, how these changes were distributed among various employee segments. Two methods were used. First, travel time changes were estimated using paired t-tests. Second, regression equations were used to estimate project time savings as a function of trip length, route, and location of residence. Results show that travel time savings due to the project were typically small, less than ten percent. Nonparticipants experienced greater savings than participants, and some segments of participants experienced longer travel times during the project. The panel method proved to be an effective way to measure project travel time impacts and shows that the method is appropriate in short time applications.Presented at the Annual Meeting of Transportation Research Board, January 7–11. 1990, Washington, D.C.     

基于沥青路面施工质量的设备合理匹配技术研究

现代高速公路施工不仅要以大规模机械化为基础,而且各机型之间需协调工作,形成与路面材料特性相适应的有机整体。通过对高速公路设备组成中核心设备的作业性能分析和试验研究,得出了摊铺机的合理作业工况,提出了以保证和提高路面施工质量为基础的施工机群合理匹配理论,并对核心设备、主要设备和辅助设备的合理配置进行了分析,给出了计算公式。     

加速发展我国高性能船舶和水上高速客运

为开发海洋经济，发展海上运输，加快海军现代化建设步伐，必须加速发展高性能船舶和水下高速客运。为此，本文提出了有关决策层参考的几点政策性建议。     

Subsidy and public transit performance: A factor analytic approach

The need to measure and evaluate transit system performance has led to the development of numerous performance indicators. However, depending upon the indicator, we oftentimes reach different conclusions regarding transit system performance. The research reported in this paper uses factor analytic methods to generate a set of underlying attributes (factors) that capture the performance of public transit systems in Indiana. Similar to what is reported in the literature, this study finds three attributes that best describe transit system performance: efficiency, effectiveness, and overall performance. Based upon systemsÕ factor scores, the study finds that systems scoring highly on one attribute generally perform well on the remaining attributes. Further, there is an inverse relationship between system performance and subsidies, a finding that supports performance based subsidy allocations.     

1Cr18Ni9Ti钢的抗冲击性能实验研究

材料本构关系的准确程度对结构数值仿真分析的结果影响很大。对于受冲击载荷的金属结构,材料特性还与应变率关系密切。通过分别采用Hopkinson压杆实验系统与WDW3050微控电子万能试验机进行了1Cr18Ni9Ti钢的动态与静态性能测试,得到了本构方程的表达式,为后续的结构抗冲击仿真分析提供了较为准确的数据。