道路陡坡对水泥混凝土路面荷载应力的影响分析

以水泥混凝土路面结构为研究对象,采用三维有限元方法分析不同纵坡条件下路面结构在标准轴载作用下的应力变化。得出了板底弯拉应力、混凝土板最大主拉应力、层间剪应力与道路坡度之间的关系,探讨了水泥混凝土路面在纵坡地段的受力机理,为特殊地段路面结构设计提供参考。     

钢筋混凝土空间梁单元截面刚度计算的Cranston方法应用探讨

研究了用空间杆系有限元进行钢筋混凝土结构空间弹塑性极限承载力分析中求截面弹塑性刚度的Cranston方法。通过理论分析,指出了已有方法在Cranston迭代收敛后求截面刚度的缺陷或不明确之处,提出了用有效截面的换算截面重心及数值积分求截面刚度时,均应采用微元切线模量的观点。在自编程序中采用不同模量对同一试验进行了全过程分析,有限元分析结果与试验结果对比,证明了该方法的正确性,可以用于大跨度钢筋混凝土结构的极限承载力分析。     

青藏公路路基纵向裂缝病害及其发生规律

路基裂缝病害是青藏公路上继沉降以后的第二大类型路基病害,此种类型的病害与公路左右两侧的太阳辐射差异密切相关。病害统计结果表明,发生在阳侧的路基纵向裂缝有22.5条,占总裂缝条数的70.0%,占路基纵向裂缝总长度的65.0%;其次,从病害发生路段的道路走向来看,路基纵向裂缝病害主要发生在走向为S90°、W S60°、W S30°、EW 0°和ES60°的路段,在走向为ES30°的路段上仅发生1条路基纵向裂缝。路基纵向裂缝与走向间的这一关系主要与高原上特殊的太阳辐射日变化规律和青藏公路主体走向有关。     

用MATLAB计算发动机悬置系统的固有频率和主振型

介绍了计算发动机橡胶悬置系统固有频率和主振型的过程,利用MATLAB编程并验证程序的正确性。通过程序的运行,能快速获得悬置振动系统的固有特性,为设计人员判断悬置系统是否会发生共振提供理论依据,也为进一步分析系统的响应打下了必要的基础。     

大侧偏角下侧偏松弛长度特性的研究

本文在稳态指数统一模型和一阶线性微分方程的基础上，研究了大侧偏角下动态过程中侧偏松弛长度的特性。侧偏松弛长度是由轮胎的侧向弹性决定的。在大侧偏角下，侧偏松弛长度不再是一个常数，而是随着侧向有效滑移率的改变而改变，而且它们之间呈现非线性特性。深入了解侧偏松弛长度的特性对研究轮胎动态特性和建立轮胎动态模型具有重要的作用。     

A combined use of phase plane and handling diagram method to study the influence of tyre and vehicle characteristics on stability

This paper deals with in-curve vehicle lateral behaviour and is aimed to find out which vehicle physical characteristics affect significantly its stability. Two different analytical methods, one numerical (phase plane) and the other graphical (handling diagram) are discussed. The numerical model refers to the complete quadricycle, while the graphical one refers to a bicycle model. Both models take into account lateral load transfers and nonlinear Pacejka tyre–road interactions. The influence of centre of mass longitudinal position, tyre cornering stiffness and front/rear roll stiffness ratio on vehicle stability are analysed. The presented results are in good agreement with theoretical expectations about the above parameters influence, and show how some physical characteristics behave as saddle-node bifurcation parameters.     

Activity patterns,time use,and travel of millennials: a generation in transition?

Millennials, defined in this study as those born between 1979 and 2000, became the largest population segment in the United States in 2015. Compared to recent previous generations, they have been found to travel less, own fewer cars, have lower driver’s licensure rates, and use alternative modes more. But to what extent will these differences in behaviour persist as millennials move through various phases of the lifecycle? To address this question, this paper presents the results of a longitudinal analysis of the 2003–2013 American Time Use Survey data series. In early adulthood, younger millennials (born 1988–1994) are found to spend significantly more time in-home than older millennials (born 1979–1985), which indicates that there are substantial differences in activity-time use patterns across generations in early adulthood. Older millennials are, however, showing activity-time use patterns similar to their prior generation counterparts as they age, although some differences – particularly in time spent as a car driver – persist. Millennials appear to exhibit a lag in adopting the activity patterns of predecessor generations due to delayed lifecycle milestones (e.g. completing their education, getting jobs, marrying, and having children) and lingering effects of the economic recession, suggesting that travel demand will resume growth in the future.     

The dynamic response of rail support

This research reviews principles behind the dynamic response of rail supports, and introduces a method of analysis to find the maximum response in a realistic setting. Assuming a time-dependent, moving mass with massive wheels is essential, because the ratio of the moving mass to the rail mass is significant. However, the dynamic response of the track is not affected by dynamic properties of the train other than its unsprung mass, because the natural frequencies of the train suspension and track are significantly different. A numerical method is developed to model the dynamic response based on these principles, and applied to the Korean urban transit. The dynamic response includes multiple peaks with a large amplitude range, creating noise while the wheel passes the support. The dynamic impact factor (DIF) for the rail support depends mainly on the stiffness and damping of the rail support. The DIF for the rail moment is below the code value, whether this value is based on numerical analysis or on-site measurements. However, our numerical analysis results in a DIF for support settlement that is greater than the code value, if the damping is less than 3%.     

铁路大跨度连续梁拱组合桥结构参数研究

为了解结构设计参数对铁路大跨度连续梁-拱组合桥受力特性的影响,进而对今后同类桥梁设计提供引导作用,以兰渝线广元嘉陵江特大桥为工程背景,研究矢跨比、拱轴线形状、拱梁刚度比这3个设计参数对桥梁结构力学特性的影响。分析结果表明:矢跨比对拱肋轴力和拱脚、主梁中跨弯矩影响显著,取值在1/4~1/5时较为合理;1.6次抛物线、2.4次抛物线及圆弧线作为拱轴线时,拱脚截面弯矩过大,2次抛物线或悬链线作为此类桥型的拱轴线较为合理;拱梁刚度比对结构轴力影响较小,对拱肋弯矩影响较大,随拱梁刚度比的增大,拱肋分担的弯矩显著提高。     

盾构隧道始发与到达段环间纵向压力空间分布规律研究

现场实测数据表明，盾构隧道始发与到达段各断面纵向压力较小，可能导致环缝漏水。为解决此问题，通过求解描述隧道变形特征的微分方程，获得隧道始发与到达段纵向力的分布规律；并以此为依据，提出纵向拉结构件的设计方法。研究结果表明： 1)在不采用拉结措施的情况下，进出洞口附近纵向力最小，接近于0； 2)距离洞口越远的断面，其纵向力越大； 3)采用纵向拉结措施可以有效地增大始发与到达段断面纵向力。在对纵向拉结构件进行设计时，其最小横截面积由隧道刚度和环缝止水垫闭合压力决定，其最小长度由隧道和地层之间的切向黏结刚度决定。