恒温热源条件下实际回热式布雷顿循环的功率密度特性

用有限时间热力学方法分析恒温热源条件下实际回热式布畦顿循环的功率密度特性,计入工质与高,低温侧换热器的热阻损失,压气机,涡轮机的不可逆压缩和膨胀损失,以及管路系统中的压力损失,导出了功率密度与压比间的解析式,并通过数值计算将对应于最大功率密度时的一些参数与对应于最大功率时的同样参数进行了比较。     

A two-phase model for dry port location with an application to the port of Dalian in China

This paper provides guidance for an optimal and reasonable dry port layout for the port of Dalian in China. We present a two-phase framework on the location of dry ports, which solves the selection of candidate inland cities and optimal dry port location choice, respectively. Fuzzy C-Means Clustering is applied to select alternative cities in the vast hinterland of the seaport of Dalian, with a view to identify evaluation factors that affect the location selection decision. A cost-minimisation linear programming solution is proposed, with the aid of a genetic algorithm, to choose the optimal location as well as capacity level among the candidate inland cities.     

污水管网系统节点流量模拟计算

污水管网系统节点流量模拟计算是城市污水管网系统规划设计和运行管理的基础性工作。该文从污水管网系统规划设计和运行管理两个方面阐述了污水管网系统节点流量模拟计算的内涵,并对该领域的未来发展作了展望。     

细粒土路基平衡密度状态分析

为掌握细粒土路基的平衡密度状态及其变化原因,统计分析9条高速公路路床顶部的压实度和含水率检测资料,对3条黄泛区高速公路路基的压实度、含水率以及1条高速公路的路基模量进行全断面深度检测,并开展非饱和细粒土的湿化试验和弹性恢复试验。现场实测发现：在役路基除了实测含水率较最佳含水率有0~13.8%的增加外,相应的压实度出现了0~10%的线性衰减;其中,路床区、上路堤以及受水位波动影响较大的路基底部的压实度降低十分明显,而下路堤上部区域压实度基本维持不变甚至有所增大;路基压实度的变化与土的含水率密切相关。非饱和土三轴试验结果表明：土体湿化过程中,吸水导致体积膨胀和压实度衰减;当路床土吸湿至平衡湿度（含水率为18%）时,土体压实度降低5.07%。弹性恢复试验结果表明：压实路基土因变形恢复导致路基密度衰减;低含水率、高压实度和低上覆荷载条件下的弹性恢复较大,压实路床土弹性恢复导致的压实度降低值最大为0.5%;综合湿化和弹性恢复结果来看,两者占黄泛区路床区压实度衰减总量（约7%）的79.6%;此外,路基剪切模量的原位实测值较相同物理状态下的室内重塑土结果平均高出了60.64%,表明运营多年的高速公路路基土具有一定的结构性。因此,既有路基的评价应该同时考虑路基湿度增加、密度降低以及土体结构性等综合因素。     

不同RAP掺量下就地热再生沥青混合料空隙率优选分析

依托福建省某高速路面预防性养护工程,采用最大理论密度线理论设计了再生沥青混合料级配,通过马歇尔试验研究了RAP料在86%、90%、94%掺量下再生沥青混合料空隙率的变化,并基于二次回归方程建立了不同RAP掺量与再生沥青混合料空隙率之间的回归方程,说明了不同RAP掺量与空隙率之间的变化趋势。研究结果表明:随着RAP料掺量增加,再生沥青混合料空隙率在逐渐降低;当再生沥青混合料空隙率控制在4%时,RAP料掺量约为89%。     

橡胶粉改性MAC沥青混合料路用性能的研究

主要讨论了橡胶粉在MAC沥青混合料中的应用,研究了橡胶粉干法改性沥青混合料高温性能、抗水损害性能及混合料的抗飞散性能,证明了其优良的路用价值。     

Comparative analysis of household car,motorcycle and bicycle ownership between Osaka metropolitan area,Japan and Kuala Lumpur,Malaysia

The interactions among different types of vehicle ownership including car, motorcycle and bicycle are examined by developing simultaneous vehicle ownership models in this study. Large scale person trip survey data for Osaka metropolitan area, Japan and Kuala Lumpur, Malaysia are used for empirical analysis. The results suggest that population density at residential area significantly and negatively affects car ownership for both areas, and that the effects are larger for Osaka metropolitan area than for Kuala Lumpur. Also, bicycle ownership becomes higher at higher population density area for Osaka area, while higher at lower population density area for Kuala Lumpur, which represents the different usage patterns of bicycle between the two areas.

光面爆破技术在城市地铁隧道施工中的应用

文章从光面爆破机理、光面爆破技术中各主要参数的确定,以及光面爆破在实际工程中的应用几个方面出发,以深圳地铁安-侨区间隧道硬岩段施工为例,研究分析了如何利用光面爆破技术来提高城市地铁浅埋暗挖法的光爆效果,特别是近距离穿越重要建(构)筑物时如何有效进行光面爆破。     

Aggregating mobile object trajectories: cumulative time geographic density estimation for GPS data

We present new approaches that expand upon the time geographic density estimation (TGDE) framework previously employed to estimate potential path trees. In the past, TGDE metrics have identified possible locations an individual moving object may have passed between, given known origin and destination points. This paper utilizes a new form of TGDE to investigate taxicab GPS traces over a specified time horizon with position ‘gaps’. To this end, we propose a new extension to the TGDE framework, TGDE-C, which is used to determine the cumulative TGDE values for a group of GPS traces, at a given location. These metrics are applied to multiple taxis and allow for time of day analysis. Additionally, we combine these new extensions with existing TGDE metrics that allow us to determine how accessible individual or groups of vehicles are to urban opportunities.     

Impact of regional population density on walking behavior

Land use can influence walking (measured by the number of steps) and so the health of people. This paper presents the result of empirical research on the impact of regional population densities (inhabitants per inhabitable area) on the number of steps (all steps, both outdoors and indoors). With data collected from almost 11,000 respondents in 148 Japanese regions, we estimate polynomial regression models, the total number of steps being the dependent variable and densities being the main independent variable. Regional population density significantly affects the number of steps after controlling for individual and household attributes. The estimated population density that maximizes the number of steps is around 11,000?persons/km². Increasing densities, up to levels of around 11,000?inhabitants/km², could increase walking and consequently the health of inhabitants. The population density elasticity of the number of steps is 0.046–0.049 in a simple log linear regression model without a peak.