基于AutoCAD_VBA的无缝线路一体化设计系统开发

该系统利用Auto CAD VBA API成熟的内部封装机制,将大量查表计算工作和参数运算整合到程序模块内,将多个分步计算公式在程序内部进行推导合并,并利用可视化编程工具形成用户界面。使用户输入最少的参数完成整部计算,加快计算速度,减少错误。该系统还包含绘图模块,运行VBA宏指挥CAD自动绘制无缝线路单元轨节布置图。经过多个无缝线路设计项目验证,结果证明该系统准确可靠。     

铁路500m长钢轨生产工艺流程及规模的探讨

针对目前铁路焊轨基地的实际,对长钢轨焊接工艺进行说明,通过工艺流程示意图,详细介绍铁路500 m长钢轨生产的工艺流程。原料为100、25 m钢轨时,分别计算日生产长钢轨能力,从而确定年生产规模。根据生产能力和实际调研,确定原料轨存轨台、长钢轨时效台、长钢轨成品台、工位规模及辊道线间距,为将来新建或改建长钢轨焊接基地提供数据参考。     

Development and validation of a direct mode choice model

A direct discrete mode choice model is introduced using relative attributes of competing modes as well as socioeconomic characteristics of travelers. The model is calibrated and validated for two available historic databases in the Dallas–Fort Worth region. The validation is conducted against the outputs of a current nested logit model used by the regional planning organization as well as the observed values based on transit ridership surveys for a newly inaugurated commuter rail service. The calibrated model is applied after the introduction of this new transit mode. The results show that the estimated mode shares by the proposed model have a statistically better consistency with the observed values than the estimates of the conventional nested logit model. Unlike the logit model, the structure of the direct model based on relative attributes also has the advantage of not needing recalibration each time a new travel mode is introduced. The model is found to be easier to calibrate and produces more accurate results than the nested logit model, commonly used by many metropolitan planning organizations.     

Adhesion estimation at the wheel–rail interface using advanced model-based filtering

The railway industry in the UK is currently expanding the use of condition monitoring of railway vehicles. These systems can be used to improve maintenance procedures or could potentially be used to monitor current vehicle running conditions without the use of cost prohibitive sensors. This paper looks at a novel method for the online detection of areas of low adhesion in the wheel/rail contact that cause significant disruption to the running of a network, particularly in the autumn season. The proposed method uses a Kalman–Bucy filter to estimate the creep forces in the wheel–rail contact area; post-processing is then applied to provide information indicative of the actual adhesion level. The algorithm uses data that, in practice, would be available from a set of modest cost inertial sensors mounted on the vehicle bogie and wheel-sets. The efficacy of the approach is demonstrated using simulation data from a nonlinear dynamic model of the vehicle and its track interface.     

关于上海地铁基坑设计相关规范的探讨

2010年上海有两个与基坑设计相关的规范进行了新旧更替.基于地铁车站基坑设计,从规范的适用性、规范的衔接、地铁基坑等级划分的演变和基坑稳定性验算等几个方面,探讨了目前各种规范之问的关系以及设计实践中的规范选用.对环境良好的地铁基坑变形控制和新规范未予明确的稳定性验算安全等级进行了分析讨论,提出了应用建议.     

Structural safety of trams in case of misguidance in a switch

Tram vehicles mainly operate on street tracks where sometimes misguidance in switches occurs due to unfavourable conditions. Generally, in this situation, the first running gear of the vehicle follows the bend track while the next running gears continue straight ahead. This leads to a constraint that can only be solved if the vehicle's articulation is damaged or the wheel derails. The last-mentioned situation is less critical in terms of safety and costs. Five different tram types, one of them high floor, the rest low floor, were examined analytically. Numerical simulation was used to determine which wheel would be the first to derail and what level of force is needed in the articulation area between two carbodies to make a tram derail. It was shown that with pure analytical simulation, only an idea of which tram type behaves better or worse in such a situation can be gained, while a three-dimensional computational simulation gives more realistic values for the forces that arise. Three of the four low-floor tram types need much higher articulation forces to make a wheel derail in a switch misguidance situation. One particular three-car type with two single-axle running gears underneath the centre car must be designed to withstand nearly three times higher articulation forces than a conventional high-floor articulated tram. Tram designers must be aware of that and should design the carbody accordingly.     

城市轨道交通线路起终点及延伸问题研究

城市轨道交通线路的起终点及预留延伸方案问题是线路选线的一项重要工作,线路的起终点将直接影响项目的建设规模、工程投资及近远期分界点。线路起终点应尽可能预留远期发展的条件。     

Dynamic model for ride comfort evaluations of the rubber-tired light rail vehicle

The dynamic model was developed to evaluate vibration accelerations and ride comforts during the running of the Korean-standardised rubber-tired light rail vehicle. Ride comfort indexes were analysed and tested in accordance with UIC 513R by using the dynamic model and the actual vehicle in the test track. Based on the comparisons between analysis results and test results, the validity of the developed dynamic model was evaluated. It was verified whether or not the developed Korean-standardised rubber-tired light rail vehicle met the specified target specification on ride comfort. In addition, the influence of the wearing of guide wheels on ride comfort was estimated.     

Indirect method for wheel–rail force measurement and derailment evaluation

Wheel set flange derailment criteria for railway vehicles are derived and the influence of wheel–rail contact parameters is studied. An indirect method for wheel–rail force measurement based on these derailment evaluation criteria is proposed. Laboratory tests for the calibration of strain–force devices on the bearing box are carried out to determine the relationship between the applied force and the measured strain. The simulation package, SIMPACK, is used to develop a passenger car model to generate wheel–rail forces and vibration signals. Different cases are considered in this model to provide an accurate validation of the identified wheel–rail forces. A feasibility test is conducted in the Beijing Loop test line using a passenger car equipped with a set of strain gauges on the wheel set. The comparison of the force time history applied to the instrumented wheel set and that obtained using the indirect method is presented.     

地铁车辆段综合管线设计研究

研究目的:综合管线设计是地铁车辆段设计的一大难点,也是地铁车辆设计成功与否的关键点之一。通常综合管线是在各专业完成施工图后才能正式开展工作,因此每次综合管线设计的工期都非常短。目前传统的综合管线设计思路及方法已不能满足设计需要,为了较好地解决综合管线设计周期短、质量要求高的难题,推出新的综合管线设计方法尤为迫切。研究结论:通过地面车辆段、双层车辆段综合管线设计的归纳总结,提出采用反推法设计综合管线。采用反推法设计综合管线,将缩短地铁车辆段综合管线设计周期50%,提高了设计质量的同时还提高了设计人员的综合素质。