铁路小半径曲线刚构-连续梁桥设计研究

为研究小半径曲线刚构-连续梁桥的受力特点,以某(36+60+36)m铁路刚构-连续梁桥为背景进行分析。采用BSAS、MIDAS、ANSYS建立有限元模型,针对该桥小半径、施工复杂等特点,从弯扭耦合效应、刚度、变形、稳定性等方面进行详细分析,结果表明:该桥具有足够的强度、刚度和稳定性。     

On the application of hydraulic theory to the deep-water flow through the Irbe Strait

A flow-dependent critical-point method for investigating topographically controlled flow in natural channels is applied to the bottom current through the Irbe Strait connecting the Baltic proper and the Gulf of Riga. This approach is based on the functional formalism due to Gill [Gill, A.E., 1977. The hydraulics of rotating-channel flow. J. Fluid Mech., 80, 641–671.], and here is used for the stratified flow structure observed during the IRBEX-95 field campaign. A critical section of the realizable flow regime was found to be located slightly downstream of the most pronounced horizontal constriction of the channel. The predicted baroclinic volume flux 7200 m³ s⁻¹ overestimates the observed mean bottom-water transport by around 30%, a discrepancy which most likely can be explained by the lack of sea level conditions and friction in the model.     

Normal and shear forces in the contact patch of a braked racing tyre. Part 1: results from a finite-element model

In this first part of a two-part article, a previously described and validated finite-element model of a racing-car tyre is developed further to yield detailed information on carcass deflections and contact pressure and shear stress distributions for a steady rolling, slipping, and cambered tyre. Variations in running conditions simulated include loads of 1500, 3000 and 4500 N, camber angles of 0° and ?3°, and longitudinal slips from 0% to?20%. Special attention is paid to heavy braking, in which context the aligning moment is of great interest. Results generated are in broad agreement with limited experimental results from the literature and they provide considerable insight into how the tyre deforms and how the contact stresses are distributed as functions of the running conditions. Generally, each rib of the tyre behaves differently from the others, especially when the wheel is cambered. The results form a basis for the development of a simpler physical tyre model, the purpose of which is to retain accuracy over the full operating range while demanding much less computational resource. The physical tyre model is the topic of the second part of the article.     

A model-based traction control strategy non-reliant on wheel slip information

A traction control system (TCS) for two-wheel-drive vehicles can conveniently be realised by means of slip control. Such a TCS is modified in this paper in order to be applicable to four-wheel-drive vehicles and anti-lock braking systems, where slip information is not readily available. A reference vehicle model is used to estimate the vehicle velocity. The reference model is excited by a saw-tooth signal in order to adapt the slip for maximum tyre traction performance. The model-based TCS is made robust to vehicle modelling errors by extending it with (i) a superimposed loop of tyre static curve gradient control or (ii) a robust switching controller based on a bi-directional saw-tooth excitation signal. The proposed traction control strategies are verified by experiments and computer simulations.     

能效设计指数EEDI功率曲线的直接计算方法

船舶能效规则强制生效后，所有适用船舶必须满足Attained EEDI≤Requied EEDI的条件，因此准确估算或预报功率曲线从而计算得到Attained EEDI将对适用船型具有极为重要的意义。根据国内外关于功率-转速-航速预报的最新进展，依据螺旋桨敞水性能图谱，采用KT/J^2系数，给出了功率曲线的直接计算方法，经实际算例验证，该方法相对传统的间接计算方法更为清晰简便，且结果准确可靠。     

广珠西线高速公路沉降速率与剩余沉降关系分析

广珠西线高速公路实测沉降表明,沉降速率与剩余沉降基本为线性关系,沉降速率与剩余沉降的平方基本为正比关系,进而从理论上论证了两者的关系。两者的这种关系有利于将工后沉降法、沉降速率法统一起来。     

机车曲线通过模拟试验台设计及其应用

介绍了一种结构简单的机车曲线通过模拟试验台。主要从工作原理、组成结构以及应用等几个方面进行分析,以达到检验机车曲线通过能力的要求。     

斯太尔汽车双前轴转向机构分析及其应用

本文在对斯太尔重型汽车的双轴转向传动机构进行分析的基础上建立了数学模型,研究了各部分的传动过程,并采用MATLAB语言编写了转向传动机构分析程序,对转向轴内外轮之间,前后轮间的转角匹配,以及最小转弯半径的匹配关系进行了优化。     

基于解调技术的喷泵空化特征提取方法研究

通过对喷水推进泵实船空化测量，捕捉了喷水推进泵在不同工况下的进口水声信号和壳体振动信号，对其空化调制特征进行了研究。结果表明：①喷水推进泵的空化受其叶频及其倍叶频调制；②随着空化强度的增加，喷水推进泵的调制特征量的变化与声压规律曲线一致，即满足先上升后下降的趋势。据此，可以利用调制特征对喷水推进泵的空化进行实时监测。