配比设计与级配调试现场速解方法研究

应用EXCEL电子图表的数据处理功能，研究了混合料配比设计与级配调试的速解途径。结合混合料配比设计与料场管理的现实特点，发现借助多元最小二乘法拟合原理，由电算程序求解超静定线性方程组，不仅可以快速准确地完成配比设计，而且可以随配比调节同步显示出级配变化。结果表明电子图表既可作为配比设计模版，又可现场预知级配调控结果，是拌和场消除成品料级配废料的一种便捷手段。     

摊铺机液压系统设计

分析了摊铺机液压系统的特点,明确了摊铺机总体及各系统的设计要求,提出了液压系统设计时的步骤并进行了详细的介绍,最后总结了设计时应注意的问题.     

南昌生米大桥总体设计

生米大桥是南昌市外环快速道上的城市桥梁，全长3880m，简要介绍生米大桥的项目概况、建设条件、总体布局、技术标准、技术特点、关键技术、科学研究等有关情况。     

机器人生产线在船舶智能制造中的应用研究

智能制造是“中国制造2025”的主攻方向。本文先浅谈了智能船厂，并结合国内首个智能船厂试点对智能船厂的初级发展建设等进行初步探索，主要对船舶智能制造机器人生产线应用进行梳理分析，如工艺流程及布置、生产模式改进、提质增效和人员减配等。     

荷兰海军APAR多功能雷达系统及其开发经验

为充分发挥多功能优势,APAR雷达采用了高效控制手段,对雷达信号收/发时间和能量进行综合管理,综合平衡二者系统资源开支。APAR雷达波形设计还综合考虑了包括作战需求、接收信号特征、技术特征和参数等在内的各种因素。APAR雷达在系统设计、系统工程、详细设计与评估测试等方面均进行了总体规划,并很好地吸收了已有的技术积累,保证了系统最终成功。     

Fitness-for-purpose assessment of cracked offshore wind turbine monopile

In this paper, the procedure for flaw acceptability assessment is examined through a case study of a semi-elliptical surface crack in an offshore monopile as it grows till it forms a through thickness crack. Using the procedure prescribed in an industrial standard (BS 7910), the fracture ratio, K_r is shown to increase monotonically with increasing crack depth. The load ratio, L_r, is initially insensitive to the crack depth. However, there is a rapid increase in L_r when the crack depth to thickness ratio exceeds 80%. L_r values obtained from detailed 3D FE limit analysis using elastic-perfectly-plastic material behaviour do not exhibit the asymptotic behaviour predicted by BS 7910 as the flaw transitions from deep crack to through-thickness crack. Furthermore, K_r predicted by BS 7910 is shown to be an over-estimation for the typical dimensions of offshore monopiles. The findings suggest that a structure with a deep flaw may be identified as unacceptable based on BS 7910 when it may still possess a non-trivial amount of structural residual life. This is a concern for monopiles where crack growth as a large flaw forms a significant part of the total life.     

大神高速公路穿越矿区选线思路

结合山西省大营至神池高速公路设计经验,对矿区公路的特点进行了总结归纳,并以实际工程为例,提出了选线设计的总体原则和主要思路,供设计人员参考。     

Integrated approach to determine highway flooding and critical points of drainage

Among the natural hazards that threaten transportation infrastructure, flooding represents a major hazard to highways as it challenges their design, operation, efficiency and safety. In extreme cases, it may lead to massive obstruction of traffic and direct damages to the road structures themselves and indirect damages to the economic activity and development of the region. To enable the prevention of such consequences, and the proposition of adaptive measures for existing infrastructure, this paper presents an integrated framework to identify the most vulnerable points to flooding along a highway. This is done through the combination of remote sensing information (e.g. LiDAR based Digital Elevation Model, satellite imagery), a high-quality dataset, and a quasi-2D hydrodynamic model. The forcing condition is defined using a hyetograph associated to a storm with duration of 1 day and return period of 100 years. The selected highway is located in the Mexican state of Tabasco, where extreme precipitation events and floods are frequent. Results demonstrate the ability of the methodology to identify critical water levels along the road (h > 1.50 m) at those locations where flooding has been experienced, as well as points of inspection for the highway drainage. These locations were visited in the field and maintenance problems were detected that do increase its level of exposure. We show that this framework is useful for the generation of a flood management strategy to the analyzed highway, which includes an optimum location of adaptive measures to an anticipated more intense future climate.     

桥墩及桩基形式对墩底平转施工转盘设计的影响

以新建福厦(福州—厦门)高速铁路17500 t转体刚构为背景,采用实体有限元方法分析了不同桥墩类型及桩基布置对墩底平转转体中转盘受力的影响,并对桥墩及桩基进行了优化。结果表明:实体墩对上转盘受力最有利,其次是空心墩,最不利的是双薄壁墩;增加墩底实体段能够有效降低空心墩、双薄壁墩上转盘的主拉应力;随着墩底实体段高度的增加,主拉应力降低的幅度逐渐变小;球铰正下方有桩基时对下转盘底部受力更加有利;距离球铰中心越远,桩基受力越小,适当增加中桩桩径,可使各桩基应力状态更加均衡。     

Planning hierarchical urban transit systems for reductions in greenhouse gas emissions

Public transit systems with high occupancy can reduce greenhouse gas (GHG) emissions relative to low-occupancy transportation modes, but current transit systems have not been designed to reduce environmental impacts. This motivates the study of the benefits of design and operational approaches for reducing the environmental impacts of transit systems. For example, transit agencies may replace level-of-service (LOS) by vehicle miles traveled (VMT) as a criterion in evaluating design and operational changes. In previous work, we explored the unintended consequences of lowering transit LOS on emissions in a single-technology transit system. Herein, we extend the analysis to account for a more realistic case: a transit system with a hierarchical structure (trunk and feeder lines) providing service to a city where demand is elastic. By considering the interactions between the trunk and the feeder systems, we provide a quantitative basis for designing and operating integrated urban transit systems that can reduce GHG emissions and societal costs. We find that highly elastic transit demand may cancel emission reduction potentials resulting from lowering LOS, due to demand shifts to lower occupancy vehicles. However, for mass transit modes, these potentials are still significant. Transit networks with buses, bus rapid transit or light rail as trunk modes should be designed and operated near the cost-optimal point when the demand is highly elastic, while this is not required for metro. We find that the potential for unintended consequences increases with the size of the city. Our results are robust to uncertainties in the costs and emissions parameters.