Effect of Seismic Parameters on the Safety Factor for an Underground Cavern北大核心CSCD

In order to quantitatively evaluate the safety of the surrounding rock of an underground cavern under seis-mic load, a comprehensive evaluation method for the stability of surrounding rock is proposed based on the general safety factor and point safety factor. A calculation method for the general safety factor of a cavern based on the prin-ciple of shear strength reduction of a rock mass is given, the run-through of the plastic zone between the main power-house and main transformer room is presented as a critical criterion for the overall instability of the cavern, and the general safety factor is obtained by searching for the reduction coefficient. A point safety factor calculation method based on the Mohr-Coulomb yield criterion is given. The influence of different seismic input parameters on the general safety factor of the cavern and the point safety factor of key positions are studied based on an underground power-house cavern of a hydropower station in Southwest China. The results show that the quantitative evaluation method for the stability of the surrounding rock based on the safety factor is feasible and can reflect the general safety de-gree and local safety degree of different positions of the cavern for different working conditions. It is found that the general safety factor of the cavern and the point safety factor of key positions decrease with an increase of the ampli-tude and duration of a seismic wave while they increase with an increase of the incident angle; additionally, the low frequency of a seismic wave has a great influence on the cavern while the high frequency has little effect. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

基于名义应力法的疲劳卡片构建方法研究

基于有限元的疲劳寿命预测可应用于各行业,疲劳寿命预测精度的提高,离不开有效的材料疲劳卡片,疲劳卡片反映了载荷水平与疲劳寿命的关系。通过设计合理的材料试样的疲劳试验,结合试验与有限元计算,计算不同损伤参量创建应用于疲劳寿命分析的材料疲劳卡片,同时对疲劳卡片的仿真精度进行了验证。结果表明,基于名义应力法构建的疲劳卡片具备较高的预测精度,结合材料试验数据与仿真结果构建的多应力比S-N疲劳卡片,可用于其他适用于应力疲劳分析的零部件疲劳寿命分析,为提高零部件疲劳寿命预测精度提供新的技术途径,为零件的前期结构设计提供参考,可在不同领域进行推广并开展进一步分析研究。     

双闭环控制对Buck类变换器动态响应的影响

Buck类变换器最基本的控制方式包括单电压闭环控制以及电压电流双闭环控制.相较于单电压闭环控制,基于输出电压外环、电感电流内环的双闭环控制方式具有稳态性能好、动态响应速度快、抗干扰能力强等优势.本文从阻抗的角度揭示闭环控制对Buck类变换器动态响应特性的影响机理,并进行了比较分析.最后,通过仿真验证了本文提出的阻抗分析...     

路面对四轮汽车的输入谱矩阵

通过理论分析,导出了前后轮距不同以及后轮双胎时路面对四轮车辆的输入谱矩阵。与试验数据对比证明,本文提出的模型更为符合实际情况,而且具有很大的通用性,因此可为汽车随机振动及平顺性的的理论分析和试验工作提供了较为合理的谱矩阵数学模型。     

影响车辆转向瞬态响应特性的因素研究

利用ADAMS/CAR二次开发模块,建立了国产某小客车的整车多体系统动力学仿真模型。分析了车辆转向盘角阶跃输入和脉冲输入时的瞬态响应特性,并对相关的影响因素进行了预测分析,通过调整后轮侧倾刚度等参数,优化转向瞬态特性响应结果,经过样车的试验验证了优化结果。     

乔列斯基分解应用于偏相干问题的可行性研究

在应用传统的偏相干方法进行噪声源识别时,计算条件输入和耦合较为繁琐、复杂。文章首先通过对偏相干和乔列斯基分解的分析,得到两者之间的关系;进一步运用数学归纳法,从理论上证明了乔列斯基分解应用于偏相干问题的可行性;然后指出对归一化互谱矩阵进行乔列斯基分解,可直接得到各源的贡献比大小;最后给出了应用乔列斯基分解解决偏相干问题的一般步骤。舱段试验验证了该方法的可行性和实时性。     

绥中36-1CEP至终端上岸管道总传热系数分析

首先分别用理论分析法和管道实际运行数据反算的方法计算出了绥中36-1CEP至终端上岸管道的总传热系数,对计算结果进行了比较和分析,建议采用管道实际运行数据反算确定总传热系数.然后,进一步计算分析了总传热系数对管道温降及起输压力的影响,结果表明总传热系数对管道的起输压力和终点温度影响很大,总传热系数越小,管道的终点温度越...     

���޵���ѧϰ����ѵ����������Է���

在实际的快速路交通流系统中,入口匝道的流量和快速路主路的速度都是受限的,因此在对快速路交通流进行控制时考虑这些限制十分必要. 基于迭代学习控制的快速路入口匝道控制是近年来快速路控制领域的一个研究热点,然而,至今为止还没有在输入和状态同时受限情况下的相关收敛性分析. 本文首先介绍了快速路交通流模型,并将交通密度控制转化为输出跟踪问题;然后通过严格的数学分析证明了在入口匝道流量受限和主路速度受限的情况下,基于迭代学习控制的入口匝道控制仍然能保证交通流密度收敛于期望密度;最后通过仿真研究验证了该方法在受限情况下能达到很好的控制效果.     

深水平台上层模块海上吊装多浮体响应分析

海上吊装操作是平台海上安装作业中的重要一步,深海吊装操作面临着恶劣海况的考验。对于海上吊装操作过程中的多浮体相互干扰运动,采用了时域数值纽马克方法求解,选定JONSWAP风浪谱进行随机海况模拟。重点研究了不同浪向组合对多浮体运动响应的影响,提出安全作业浪向。在安全海况下进行了不同风速影响的研究,提出安全作业的风速范围。在安全作业海况下进行了吊装操作模拟,证实吊装操作能平稳进行,对海上吊装操作安全顺利进行具有重要意义。     

Road roughness estimation based on discrete Kalman filter with unknown input

ABSTRACT

The road roughness acts as a disturbance input to the vehicle dynamics, and causes undesirable vibrations associated with the ride and handing characteristics. Furthermore, the accurate measurement of road roughness plays a key role in better understanding a vehicle dynamic behaviour and active suspension control systems. However, the direct measurement by laser profilometer or other distance sensors are not trivial due to technical and economic issues. This study proposes a new road roughness estimation method by using the discrete Kalman filter with unknown input (DKF-UI). This algorithm is built on a quarter-car model and uses the measurements of the wheel stroke (suspension deflection), and the acceleration of the sprung mass and unsprung mass. The estimation results are compared to the measurements by laser profilometer in-vehicle test.