Tuning of transfer functions for analysis of wave–ship interactions

Transfer functions are often used together with a wave spectrum for analysis of wave–ship interactions, where one application addresses the prediction of wave-induced motions or other types of global responses. This paper presents a simple and practical method which can be used to tune the transfer function of such responses to facilitate improved prediction capability. The input to the method consists of a measured response, i.e. time series sequences from a given sensor, the 2D wave spectrum characterising the seaway in which the measurements are taken, and an initial estimate of the transfer function for the response in study. The paper presents results obtained using data from an in-service container ship. The 2D wave spectra are taken from the ERA5 database, while the transfer function is computed by a simple closed-form expression. The paper shows that the application of the tuned transfer function leads to predictions which are significantly improved compared to using the transfer function without tuning.     

舰船加筋板局部强度评估中的总纵应力折减系数研究

舰船加强筋尺寸的合理确定一直是结构设计中的热点问题。本文综合考虑总纵弯曲应力和局部载荷的相互作用,研究加强筋的许用应力折减系数(C_s)的影响因素与合理取值方法。通过分析加强筋的力学模型、对比不同规范中的C_s取值,以及用非线性有限元软件Abaqus计算一系列加筋板模型,拟合C_s曲线并与规范对比,并验证剖面对称性和局部载荷作用方向对C_s取值的影响方式,丰富了舰船局部强度校核方法的技术背景,为板架设计、舰船三维局部校核程序开发提供借鉴。     

CACC车头时距与混合交通流稳定性的解析关系

研究协同自适应巡航控制(Cooperative Adaptive Cruise Control，CACC)车头时距对不同CACC比例下混合交通流稳定性的影响关系，进而为CACC车头时距设计提供参考. 应用优化速度模型(Optimal Velocity Model，OVM)作为手动车辆的跟驰模型，PATH真车实验标定的模型作为CACC车辆的跟驰模型. 基于传递函数理论，推导混合交通流稳定性判别条件，计算关于CACC比例与平衡态速度的混合交通流稳定域. 分析混合交通流在任意速度下稳定所需满足的临界CACC比例与CACC车头时距的解析关系，提出随CACC比例增加的可变 CACC车头时距设计策略，并通过数值仿真实验验证所提可变CACC车头时距策略的正确性. 研究结果表明：在所提可变CACC车头时距策略下，CACC车头时距随CACC比例增加而逐渐降低，避免取值较大影响混合交通流通行能力的提升；当CACC比例大于35%时，混合交通流在任意速度下稳定.研究结果可为大规模CACC真车实验的实施提供理论设计参考.     

Modeling free-flow speed according to different water depths—From the viewpoint of dynamic hydraulic pressure

In this paper, we propose a method of modeling free flow speed from the viewpoint of hydroplaning. First, the lift forces for different water depths were estimated using Bernoulli’s equation. Compared with the result of the experimental test performed by the Japan Automobile Research Institute, the hydrodynamic pressure coefficient was determined to be 0.03 (tf s²/m⁴). The validation of the predicted lift force is found in another published paper. A very good match is found between the computed values by the proposed numerical model and the data in other published papers. Then, the loss of contact force is considered to evaluate the hydroplaning performance of a tire. To simulate the hydroplaning speed, a tire-sliding model was utilized to obtain the traction and friction forces between the road surface and the tire. The observation data obtained in Japan in 2009 is compared with the physically computed hydroplaning speed, yielding the conclusion that the traction force at the measured desired speed is, on average, 23.4% of the traction force at hydroplaning speed. The analytical model offers a useful tool to quantitatively show that the free flow speed changes as the water depth increase.     

基于改进型消灭曲线法的横摇阻尼估算

自由衰减试验仍是目前最为有效且常用的估算横摇阻尼系数的方法.横摇阻尼系数的估算精度对于船舶横摇运动的预报起着至关重要的作用.通常采用所谓的消灭曲线法来分析自由横摇衰减数据.该方法的一个不足之处在于其推导是基于忽略了非线性恢复力项的自由横摇运动方程.另一方面,考虑更多非线性成分的能量法能够纳入该因素影响但在实施过程中较为复杂.文中提出了一种改进型的消灭曲线法,能够纳入船体非线性恢复力项的影响.所提出的方法形式简单且相比能量法更易于实施.数值试验证明了改进型消灭曲线法的正确性,并展现了其相对传统消灭曲线法所具有的优势.     

鱼雷定深航行稳定性的分叉分析

鱼雷定深运动方程含有诸多的非线性项，用传统的分析方法对其稳定性进行研究有较大难度。运用非线性科学中的分叉理论，选定鱼雷定深运动方程中的某一流体动力系数扰动值为分叉参数，系统地分析在经典比例微分深度控制系统作用下，鱼雷在退化平衡点处的航行稳定性。利用中心流形定理，推导出系统状态变量解析表达式，对系统 Hopf分叉进行分析，并进行仿真验证。结果表明，流体动力系数变化使定深航行产生 Hopf分叉，并给出了确保鱼雷稳定航行的流体动力参数取值范围。     

Fractional-order-based ACC/CACC algorithm for improving string stability

Traffic flow optimization and driver comfort enhancement are the main contributions of an Adaptive Cruise Control (ACC) system. If communication links are added, more safety and shorter gaps can be reached performing a Cooperative-ACC (CACC). Although shortening the inter-vehicular distances directly improves traffic flow, it can cause string unstable behavior. This paper presents fractional-order-based control algorithms to enhance the car-following and string stability performance for both ACC and CACC vehicle strings, including communication temporal delay effects. The proposed controller is compared with state-of-the-art implementations, exhibiting better performance. Simulation and real experiments have been conducted for validating the approach.     

新五维超混沌系统反同步研究

以新五维超混沌系统为对象，基于Lyapunov稳定性理论，采用非线性控制法、主动控制法及全局控制法，分别设计了控制器，实现了新五维超混沌系统的反同步。通过数值仿真，对三种方法的反同步效果进行了验证和对比分析，结果显示主动控制法优于其它两种方法。     

保证路基长期稳定性的技术措施研究

路基长期稳定性是一个综合性的问题,要想通过设计或施工一劳永逸的解决,在技术上是困难的,在经济上也是不适宜的。只有通过对设计、施工、养护三者综合考虑,把握影响路基长期稳定性的关键因素,才能经济、合理地解决该问题,使公路更好地为经济建设服务。     

关于木材运输船安全运输的几点分析

木材船海上运输具有一定的风险,一旦积载和绑扎不当或管理不妥,造成货物滚动、移位、货垛倒塌,就会引发安全事故甚至导致船舶倾覆。因此,加强木材船的安全管理,落实各项安全保障措施,是确保木材船安全运输生产的重要举措。