利用公交通行能力解决公交问题的探讨

分析我国公交的发展,指出在我国发展公交的道路上缺乏对公交通行能力这一重要指标的思考,提出研究公交通行能力来解决我国公交运营中存在的问题,并建立公交(包括公交车辆和公交乘客)通行能力模型。然后以北京中关村大街的公交专用道为实例,从公交通行能力方面分析该段道路公交车拥堵、混乱产生的原因,然后根据实际情况提出解决措施。     

灌注混凝土桩施工方法及工艺的探讨

通过对钻孔灌注桩与沉入桩的对比分析,得出了钻孔灌注桩的优点,并且详细介绍了钻孔灌注桩的施工工艺和方法,总结了提高灌注混凝土桩承载力的方法和灌注桩的检测手段及一般事故处理方法,以供今后类似工程实践参考.     

大直径钢管桩承载力恢复过程试验研究

针对目前预制桩承载力恢复特性研究与工程应用中的不足,依托西非某海工工程,提出高应变法。采用对同一钢管桩进行初打与不同休止时间复打相结合的试验方法,研究了大直径钢管桩沉桩后的承载力恢复过程。结合地质情况、沉桩与试验结果,得到了钢管桩承载力、侧阻力及端阻力随时间变化的一般规律及影响因素,并通过静载试验对研究结果进行了验证。该研究在提高项目施工效率、降低成本的同时,还得到了有意义的规律与结论,可为后续类似项目提供参考。     

Autonomous cars: The tension between occupant experience and intersection capacity

Systems that enable high levels of vehicle-automation are now beginning to enter the commercial marketplace. Road vehicles capable of operating independently of real-time human control under an increasing set of circumstances will likely become more widely available in the near future. Such vehicles are expected to bring a variety of benefits. Two such anticipated advantages (relative to human-driver vehicle control) are said to be increased road network capacity and the freeing up of the driver-occupant’s time to engage in their choice of leisurely or economically-productive (non-driving) tasks.In this study we investigate the implications for intersection capacity and level-of-service of providing occupants of automated (without real-time human control), autonomously-operating (without vehicle-to-X communication) cars with ride quality that is equivalent (in terms of maximum rates of longitudinal and lateral acceleration) to two types of rail systems: [urban] light rail transit and [inter-urban] high-speed rail. The literature suggests that car passengers start experiencing discomfort at lower rates of acceleration than car drivers; it is therefore plausible that occupants of an autonomously-operating vehicle may wish to instruct their vehicle to maneuver in a way that provides them greater ride comfort than if the vehicle-control algorithm simply mimicked human-driving-operation.On the basis of traffic microsimulation analysis, we found that restricting the dynamics of autonomous cars to the acceleration/deceleration characteristics of both rail systems leads to reductions in a signalized intersection’s vehicle-processing capacity and increases in delay. The impacts were found to be larger when constraining the autonomous cars’ dynamics to the more-restrictive acceleration/deceleration profile of high-speed rail. The scenarios we analyzed must be viewed as boundary conditions, because autonomous cars’ dynamics were by definition never allowed to exceed the acceleration/deceleration constraints of the rail systems. Appropriate evidence regarding motorists’ preferences does not exist at present; establishing these preferences is an important item for the future research agenda.This paper concludes with a brief discussion of research needs to advance this line of inquiry.     

相继增压系统对改善船用直列八缸发动机性能的试验研究

随着大型柴油发动机经济性和排放要求的不断提升,以及对发动机稳态、瞬态特性要求的不断提高,传统的涡轮增压系统已无法满足船用发动机全工况性能的要求。为了提高产品竞争力和适配性,针对某8缸直列船用柴油发动机开发了带有定压排气管的相继增压系统,并进行了发动机台架试验研究。结果表明：发动机中、低转速时,相继增压系统使发动机比油耗可以下降5%-10%,排气温度降低30%-45%,烟度下降55%-60%；最大扭矩可以提升15.1%-36.4%；发动机最大扭矩转速工况突加突卸响应性提升约28%-29%；相继增压系统中定压排气管的设计使得发动机高工况性能也有所提升,从而实现发动机全工况性能的提升。     

Development and calibration of a long-distance passenger traffic assignment model

This paper studies the assignment of long-distance passenger traffic on a highway corridor network. First, we propose a traditional model for the long-distance traffic assignment considering interactions with local commuter traffic. It addresses the effect of local networks on highway corridors. An iterative algorithm is developed to solve for the exact solution. Then, to address the potential computational issues that arise therein, a decomposition method is proposed by introducing a new concept of corridor elasticity. An assignment procedure for long-distance passenger traffic is developed accordingly. Numerical tests show that the proposed decomposition method makes significant improvements in computational performance at a small loss of optimality. This decomposition method well approximates the exact assignment from the traditional formulation, especially when the highway corridors are near-saturation. The proposed decomposition method appears practical for application.     

Changes in fuel economy: An analysis of the Spanish car market

This paper estimates the role that technological change and car characteristics have played in the rate of fuel consumption of vehicles over time. Using data from the Spanish car market from 1988 to 2013, we estimate a reduced form equation that relates fuel consumption with a set of car characteristics. The results for the sales-weighted sample of vehicles show that energy efficiency would have improved by 30% and 42% for petrol and diesel cars respectively had car characteristics been held constant at 1988 values. However, the shift to bigger and more fuel-consuming cars reduced the gains from technological progress. Additionally, using the results of the fuel equation we show that, besides a natural growth rate of 1.1%, technological progress is affected by both the international price of oil and the adoption of mandatory emission standards. Moreover, according to our estimations, a 1% growth in GDP would modify car characteristics in such a way that fuel consumption would increase by around 0.23% for petrol cars and 0.35% for diesel cars.     

Through the storm: Transit agency management in response to climate change

The increase in extreme weather events due to climate change poses serious challenges to public transit systems. These events disrupt transit operations, impair service quality, increase threats to public safety, and damage infrastructure. Despite the growing risk of extreme weather and climate change, little is known about how public managers recognize, experience and address these risks. Using data from a national study of public transit agencies we investigate the types of extreme weather events transit agencies are experiencing, the associated risks, and how agencies are preparing for them. We find that while extreme events are commonly experienced by transit agencies across states and transit managers perceive increased risks from these events, most agencies rely on the traditional emergency management approach to address extreme weather ex post rather than taking a proactive approach to mitigating the adverse weather impact on transit assets and infrastructure ex ante. Managers report that a lack of access to financial resources is the greatest challenge for undertaking adaptation and preparation. We conclude with a discussion of what these findings mean for understanding organizational adaptation behavior as well as climate adaptation policy making.     

Green walking networks for climate change adaptation

Climate change (CC) potentially affects people travel behaviour, due to extreme weather conditions. This is particularly true for pedestrians, that are more exposed to weather conditions. Introducing the effect of this change in transport modelling allows to analyse and plan walking networks taking into consideration the climatic variable. The aim of this work is to develop a tool that can support planning and design of walking networks, by assessing the effects of actions oriented to increase resilience with respect to extreme weather conditions (CC adaptation).An integrated approach is used, thus combining transport and land-use planning concepts with elements of outdoor thermal comfort and network accessibility. Walking networks are analysed through centrality indexes, including thermal comfort aspects into a general cost function of links and weighted nodes. The method has been applied to the walking network inside the Campus of the University of Catania (Italy), which includes different functions and where pedestrian paths are barely used by people. Results confirm that this tool is sensitive to the variables representing weather conditions and it can measure the influence of CC adaptation measures (e.g. vegetation) on walking attitude and on the performance of the walking network.     

Impact assessment of extreme weather events on transport networks: A data-driven approach

The present paper presents a data-driven method for assessing the resilience of the European passenger transport network during extreme weather events. The method aims to fill in the gap of current research efforts regarding the quantification of impacts attributed to climate change and the identification of substitutability opportunities between transport modes in case of extreme weather events (EWE). The proposed method consists of three steps concerning the probability estimation of an EWE occurring within a transportation network, the assessment of its impacts and the passengers’ flow shift between various transport modes. A mathematical formulation for the proposed data-driven method is provided and applied in an indicative European small-scale network, in order to assess the impacts of EWE on modal choice. Results are expressed in passenger differentiated flows and the paper concludes with future research steps and directions.