改善刚柔过渡区域弓网关系的探讨

对刚柔过渡区域刚性和柔性接触网的弹性不同及接触线高度不等情况进行了定性及定量分析,找出该区域弓网关系恶劣的原因,并针对原因提出改善刚柔过渡区域弓网关系的解决方案。     

摆式列车受电弓垂向振动主动控制

建立了摆式列车机电耦合动力学模型、受电弓线性和非线性动力学模型及接触网有限元模型和静态接触刚度模型,组成摆式列车-受电弓-接触网耦合动力学模型,分别设计了P和H∞鲁棒控制器,应用数值仿真方法,研究了摆式列车直线和曲线通过时两种控制器对摆式列车受电弓垂向主动控制的效果。结果表明受电弓若无垂向控制,其弓网接触压力波动较大;P和H∞鲁棒控制均能减小弓网接触压力的波动;控制延时对P控制比对H∞鲁棒控制的影响大;是否考虑接触网的振动对接触压力影响较大,对控制效果影响不大。这说明摆式列车受电弓垂向主动控制能明显改善弓网接触压力波动;H∞鲁棒控制比P控制效果更好;接触网的静态接触刚度模型可用于受电弓主动控制的定性分析。     

空气动力对弓网接触压力影响的研究

通过对高速运行的受电弓系统进行动态力学分析,建立了动力学模型,应用计算机软件对不同运行速度下的空气抬升力进行了仿真及对比分析,探讨了提高受电弓空气动力性能可采取的措施。     

受电弓主动倾摆系统的研究

通过对摆式电动车组受电弓主动倾摆系统的分析,建立ADAMS-Matlab控制模型,并对其控制特性进行仿真。结果表明该受电弓主动倾摆系统有良好的频率响应特性;在车体倾摆过程中,受电弓主动倾摆系统能有效减小受电弓滑板中点的横向位移,从而保证列车受流的连续性。     

An approach to geometric optimisation of railway catenaries

The quality of current collection becomes a limiting factor when the aim is to increase the speed of the present railway systems. In this work an attempt is made to improve current collection quality optimising catenary geometry by means of a genetic algorithm (GA). As contact wire height and dropper spacing are thought to be highly influential parameters, they are chosen as the optimisation variables. The results obtained show that a GA can be used to optimise catenary geometry to improve current collection quality measured in terms of the standard deviation of the contact force. Furthermore, it is highlighted that apart from the usual pre-sag, other geometric parameters should also be taken into account when designing railway catenaries.     

<TPL-PCRUN> Statement of methods

TPL-PCRUN is a software program for the dynamic interaction simulation of pantograph–catenary systems. In the benchmark, based on the finite element method, the catenary model was built and the pantograph was considered as a three-level spring–damper–mass system. Then, through the contact definition between pantograph and catenary, the coupled model of the pantograph and catenary system was established. The respective dynamic equations of motions were solved by the time integration method. Thus, the simulation results were obtained and submitted for the comparison with the other software. On the other hand, a standard model from EN50318 was established and analysed by TPL-PCRUN. The simulation results by TPL-PCRUN were remarkably consistent with the reference values given by EN50318. It was proved that the results by TPL-PCRUN can be reliable. Recently, the software has been updated and improved. Some new models and algorithms are proposed, including the rigid–flexible hybrid pantograph model, contact definition considering appearance characteristics of the contact surfaces, a fluid–solid coupling algorithm of the pantograph and catenary system, etc.     

国外动车组受电弓的气动噪声介绍

介绍了动车组受电弓气动噪声的产生机理,在此基础上阐述了日本新干线动车组受电弓为降低其气动噪声而采用的措施,和德国ICE动车组的受电弓设计依据和试验结果的对比,根据国外动车组受电弓情况总结了减少动车组受电弓气动噪声所采取的措施,简单介绍了最近几年有关降低动车组受电弓气动噪声的相关研究成果,主要是进一步改进受电弓的弓角和弓头。     

车辆在线监测系统 在受电弓检测中的应用

以南京地铁1号线车辆的在线检测系统中的受电弓在线监测系统为主要对象,论述其组成结构、工作过程和工作原理。在线检测系统通过图像采集、分析,实时反馈列车受电弓的工作状态;利用图形分析技术,及时发现受电弓故障并立即报警,避免弓网事故的发生。实际使用表明,该系统可以降低受电弓检查的成本,提高受电弓检修的效率,避免受电弓带故障运行,提升运营质量,保证正线的运营安全。     

基于信号和车辆系统联控的弓靴转换控制设计研究

广州地铁4号、5号、6号、14号、21号线运营线路采用第三轨集电靴受流方式,车辆段采用接触网受电弓受流方式,列车在进出车辆段时,需在弓靴转换点处进行降弓升靴或降靴升弓的操作,传统"人防"监控方法是人工监控与视频监控。文章研究利用信号定位、车辆控制软件联控的方式,实现列车弓靴转换由"人防"向"技防"的转变,设计研究成果已在广州地铁14号、21号线车辆段出入段线弓靴转换点处成熟应用。该设计研究方案能优化列车出入场管理、节约人力资源,并从根本上解决人工未按要求进行弓靴转换而产生的安全风险。     

上海轨道交通16号线地铁车辆多种受流牵引方式集成设计

文章阐述了城轨车辆在受流方式上的两种常用技术,分析了这两种常用技术的特点．对多种受流方式在城轨车辆上的集成技术进行了研究,并针对受电弓受流、受流器受流和蓄电池受流三种牵引方式的集成技术在上海轨道交通16号线地铁车辆上的应用进行了探讨。