公路特大型泥石流灾害控制技术研究

公路特大型泥石流是国内外迄今尚未解决的主要公路病害，具有大冲大淤、冲击路径变化不确定以及毁损作用极其强烈的特性，是公路泥石流研究及防治的核心。本文基于两相流理论建立了泥石流冲击力计算公式；遵循特大型泥石流发育特点及公路泥石流防治特殊要求建构了泥石流综合治理模式，并开发了速流结构、底埋隧道、翼型墩汇流技术及糙桩技术，并对相关的核心技术进行了深入分析。研究成果对于彻底解决公路特大型泥石流病害奠定了重要的技术基础。     

高压喷射注浆技术在基坑管涌处理中的运用

高压喷射注浆法是在注浆法的基础上，应用高压喷射技术而发展起来的一项新的地基加固方法。本文针对武汉市泰合广场基坑在开挖过程中形成管涌或流上而致使附近建筑物遭受严重破坏的问题，采用高压喷射注浆法施工工艺方法，杜绝了基坑壁管涌或流立现象，使基坑开挖和基础施工得以安全进行。     

西部公路发展策略研究

采用SWOT分析法作为西部公路发展策略的制定方法,在对西部公路交通系统的内外部环境影响因素归纳、剖析的基础上,给出了西部公路内外部环境分析与评价的方法,按重要性确定了西部公路发展环境的优势(S)与劣势(W)、机会(O)和威胁(T)因素,并采用定量与定性方法相结合提出了西部公路发展的建议策略,为西部公路发展在策略层面提供了理论指导。     

基于交易费用的物流运作模式研究

从交易费用理论及物流运作模式着手,探讨了市场采购、物流自营,物流外包与物流内包的适应环境及运作对象。即:对于一般的物流活动应该从市场上进行采购,对于集成化的物流服务应该采用外部外包,当第三方物流市场走向垄断时,要积极寻求物流内包。     

锁紧气缸控制回路设计

介绍了锁紧气缸的结构、锁紧方式和几种基本的控制回路,给出了气缸两腔压力平衡状态下输入气压的关系。     

辽阳出口路现场热再生简析

重点介绍了辽阳出口路现场热再生沥青混合料的级配设计和施工工艺及施工过程中的质量控制要点。     

The potential mitigation of CO2 emissions via modal substitution of high-speed rail for short-haul air travel from a life cycle perspective – An Australian case study

The objective of this study is to provide a strategic evaluation of the mitigation of CO₂ emissions via modal substitution of high-speed rail for short-haul air travel on the Sydney–Melbourne, Australia city-pair from a life cycle perspective. It has been demonstrated that when considering CO₂ emissions from vehicle operations, the modal shift from air to high-speed rail on this city-pair has the potential to provide a means of CO₂ mitigation. However, uncertainty exists with regard to the level of mitigation potential when considering the whole-of-life performance of the systems. Given the significant difference in the infrastructure requirements between the air mode and the high-speed rail mode, this study quantifies the life cycle CO₂ load attributable to each system and examines the effect on CO₂ mitigation potential. The study concluded that while the inclusion of the linehaul infrastructure did increase the CO₂ load associated with high-speed rail mode, it did not equate to or exceed the CO₂ load per trip as experienced by the air mode. The avoided annual life cycle CO₂ emission in the target year 2056 was 0.37 Mt representing an 18% reduction when compared to the air mode only on the city pair. In fact, the scenario comparison indicated that the substitution of high-speed rail for short-haul air travel on the city pair resulted in CO₂ emissions avoidance throughout the longitudinal period.     

关于山区高速外业勘察中若干问题的探讨

近几年来,我国山区高速建设里程日益增加.因受复杂地形、地质条件的限制,山区高速的外业勘察具有其独有的关键技术难点,应在普通建设条件下的作业内容、作业方式的基础上,采取针对性的对策措施,确保外勘资料满足设计需求.     

A novel approach for the modelling of air quality dynamics in underground railway stations

Indoor air quality in subterranean train stations is a concern in many places around the globe. However, due to the specificity of each case, numerous parameters of the problem remain unknown, such as the braking discs particle emission rate, the ventilation rate of the station or the complete particle size distribution of the emitted particles. In this study the problem of modelling PM₁₀ concentration evolution in relation with train traffic is hence addressed with a particle-mass conservation model which parameters are fitted using a genetic algorithm. The parameters of the model allow to reproduce the dynamics and amplitude of four field data sets from the French and Swedish underground contexts and comply with realistic bounds in terms of emissions, deposition and ventilation rate.     

A design method of tensile triangles and low transformation temperature weld metal for reduction of stress concentration and residual stress of welded joints

Stress concentration and residual stress have a significant influence on fatigue life of welded joints. In order to reduce the stress concentration of welded joints, a mathematical design method of tensile triangles (MTT) based on bionics was applied to weld shape design. Accordingly, the stress concentration of various weld beads in the corner boxing welded joint and the fillet welded T-joint was dissected using our in-house FEM software JWRIAN. It was found that there existed a large stress concentration in the conventional welded joints, whereas those welded joints with elongated weld bead were accompanied by a lower stress concentration, especially for elongated weld bead with MTT design. Furthermore, among the weld shapes of the corner boxing fillet welded joint, the rectangle shape of weld bead had the minimum stress concentration factor (1.05). For the fillet welded T-joint with MTT design, the stress concentration of weld toe decreased dramatically with the increase of the index of designed shape, but there was a minor difference of stress concentration at weld root between the weld beads with MTT design. In addition, application of low transformation temperature (LTT) weld metal utilizing martensitic transformation to the fillet welded T-joints can produce compressive residual stress at weld toe.