科研单位转制后人才资源问题研究及对策

探究科研单位转制后人才资源的开发和管理课题。调研了科研体制改革对人才资源的影响，剖析人力资源管理现状及存在的主要问题，并有针对性地阐述了应对措施，最后从战略层面思考科研单位转制后，如何实现“人才强企”的目标。从理论角度提出实施企业人才主体战略、实施智力资源资本化战略和实施人才管理体制改革战略等观点。     

高职院校培养学生立业创业能力的思考

创业能力是指一种能够顺利实现创业目标的能力,是高层次的综合职业能力,是带有创新特征的能力。本文通过对立业创业所需要具备的素质的分析,并结合当前社会对立业创业能力的新观念,就高职院校学生如何培养立业创业能力提出几点思考。     

如何防治公路建设中的水土流失

分析了公路建设中水土流失的原因，针对不同情况预测了可能产生水土流失的危害并提出了水土保持的措施。     

杭州湾跨海大桥70 m预应力混凝土箱梁用海工耐久混凝土的试验研究

通过平板抗裂试验,研究了海工耐久混凝土的早期抗裂性,采用RCM法研究了海工耐久混凝土抗氯离子渗透的能力。结果表明,使用P.Ⅱ42.5(R)硅酸盐水泥、Ⅱ区中砂、5~25 mm碎石、Ⅰ级或Ⅱ级低钙粉煤灰、粒化高炉矿渣粉及新一代高性能高效减水剂,可以配制出C 50~C 60海工耐久混凝土。     

Experimental ivnestigation on flow fields of viscous fluid around two-dimensional wings and comparison with computational results

To examine the flow field of a viscous fluid around the trailing edge of a wing with respect to the Kutta condition or the Joukowski hypothesis, an experimental investigation into the velocity fields around two-dimensional (2D) wings NACA0012 and NACA4412 was carried out using an X-type hot-wire anemometer in a wind tunnel and the method of colored milk injection in a circulating water channel. The results of these investigations revealed that the flow of a viscous fluid at the trailing edge of a 2D wing is tangential to the face on the pressure side, and that the flow is very slow or reversed on the suction side due to separation when the angle of attack is greater than 7.5°. By flow visualization, a Kármán vortex street was found in the wake of both wings (NACA0012 and NACA4412) when the angle of attack was 5°. These results show that the ordinary Kutta condition with respect to the direction of outflow at the trailing edge is not necessarily satisfied in a viscous fluid, but the Kutta condition with respect to the pressure at the trailing edge is satisfied as usual. Numerical results, which have been obtained as the solution of Reynolds-averaged Navier-Stokes equations, show good agreement with above-mentioned experimental results. Therefore, CFD (Computational Fluid Dynamics) simulation has proved to be very effective for studying steady viscous flow around the trailing edge of a 2D wing.     

流函数法在减径拔管上限分析中的应用

应用流函数法建立减径拔管的动可容速度场，用上限原理得出减径拔管的上限解，分析了摩擦状态，变形程度及相对壁厚等工艺参数对拉拔载荷的影响，从而得出最佳工艺参数。     

Dynamic Simulation of a Smart Crank and Slider Mechanism

In this paper, a smart crank and slider mechanism is analyzed mostly from a dynamic view. By means of dynamic explicit finite element method, 3D nonlinear structure is simulated. It is proved that the mechanism can effectively accomplish smart movement prescribed. And in order to ensure reciprocal movement with higher frequency, measures should be taken to avoid over heating of parts. Compared with internal energy, kinetic energy of total rigid body is dominating, and Y direction equivalent rigid velocity is much higher than X direction velocity. Equivalent rigid velocity of all parts is consistent with respective movement condition. For both energy and velocity, slider effect is dominating. Three direction equivalent inertia force oscillates. Force amplitude in Y -direction is comparitively the greatest.     

应用复合梁单元实现钢管混凝土拱桥的极限承载力分析

进行大跨度钢管混凝土拱桥的极限承载力分析,需要综合考虑几何和材料非线性、混凝土收缩和徐变、温度变化等多种因素的影响。本文从固体力学的基本理论出发,建立适于考虑上述诸多因素的复合梁单元,阐述了基于该单元的钢管混疑土拱桥极限承载力分析程序的实现方法,并通过与一个哑铃形截面钢管混凝土组合式拱肋极限承载力试验结果的对比验证了其可行性。     

200km/h客货共线单线隧道内接触网设计探讨

通过对遂渝线单线隧道内接触网悬挂的介绍,探讨了以新的设计方式进行速度200 km/h客货共线隧道内接触网平面设计的方法,并通过遂渝线情况的研究,对下一步的设计提出了建议。     

对我国建设工程索赔机制运行有关问题的探讨

索赔机制及其运行是实现索赔的重要保证。文章通过对索赔机制的定义及构成分析,阐释了索赔机制的本质及运行影响因素。据此,对我国索赔机制运行中的困境及原因做了剖析,提出了完善我国索赔机制、改善索赔环境的具体措施和建议。