桥梁自调式检修平台的设计与施工

桥梁检修施工中,要求不中断或尽量缩短交通中断时间,以满足交通运输畅通的需要,并且要保证施工质量和工作效率,结合工程特点和要求,迫切需要设计出一种安全、适用、轻便、舒适的自调式检修平台。根据桥梁结构特点,采用型钢形成U形抱箍固定于盖梁,抱箍上连接挂架平台,同时抱箍两角形成钢丝绳连接点,连接钢丝绳,继而逐榀拼接并挂设挂架平台,平台采用型钢焊接与自平衡系统连接成一榀,施工人员利用自锁式安全笼爬梯搭设和到达检修平台。运用MIDAS建模进行受力计算。结果显示:自调式检修平台的强度、刚度、抗风等均符合规范要求,同时实现了梁底全面施工不受桥下环境限制、不影响通航、不中断交通、不占用车道、不造成结构锚固破坏,以及灵活、轻便、可循环重复使用等优点。本设计可以为高速公路或地方道路桥梁检修施工提供理论基础及技术支撑。     

一种内河船舶吃水检测系统设计

船舶在通过船闸和升船机等通航设施时因超吃水会导致安全事故,目前常见的船舶吃水检测方法均存在弊端,无法满足检测需求。结合超声波衍射原理,设计一种基于侧扫单波束阵列的吃水检测系统,详细介绍该系统的组成及功能,并在葛洲坝船闸进行安装和测试。结果表明,该系统具有水质适应性强、易于安装、维护方便等优点,能够有效检测船舶动态吃水,测量值与实际核实吃水值的标准差小于0. 086 m,对过闸船舶具有一定的预警作用。     

高密度电法在某铁路隧道检测中的应用

文章以京包线旗下营隧道工程为例,通过比较高密度电法与地质雷达法酮优劣,提出采用高密度电法进行隧道病害检测,并总结了在应用高密度电法前应进行的准备工作,阐述了高密度电算法在现场检测时的具体操作方法和注意事项。     

埋地管道防腐层破损点检测技术综合应用研究

对防腐层完整性检测尤其是对防腐层破损点的精确定位,及对检出大、中面积破损点开挖修补,是确保土壤跟管道的有效绝缘、提高阴极保护效果的关键。文中分析了常用埋地钢质管道防腐层破损点检测技术特点,结合现场检测实践,综合应用多种技术,能有效检测埋地钢质管道防腐层破损点。根据测量数据可以判断破损点大小以及是否开挖修理,在管道安全运行及检测的经济性之间寻找结合点。     

一种新型在线长输管道管体检测技术

文中介绍一种以磁应力为原理的检测技术,即磁力断层摄影检测技术.该技术是一种非接触式的被动检测技术,可以检测出长输管道管体各类型缺陷.首先简单阐述了检测原理,其次详细说明了执行一次检测的全流程工作步骤,以及各步骤的工作内容,然后简要介绍了其独特的经验性计算MAOP和剩余寿命的公式,接着以实际试点检测工作为例,说明了该技术的可行性,最后指明了该技术的优缺点.     

Probabilistic multi-aircraft conflict detection approach for trajectory-based operation

Conflict detection (CD) is one of the key functions used to ensure air transport safety and efficiency. In trajectory-based operation (TBO), aircraft are provided with more flexibility in en route trajectory planning and more responsibility for self-separation. The high flexibility in trajectory planning enables random changes in pilot intent, thus increasing the uncertainty in trajectory prediction and CD. This study proposes a novel probabilistic CD approach for TBO in which the uncertainty of pilot intent is taken into account by quantifying the aircraft reachable domain constrained by the flight plan. First, a probabilistic model for aircraft trajectory prediction is developed using the truncated Brownian bridge method. Based on this model, a novel conflict probability estimation method is developed. Finally, the performance of the proposed probabilistic CD approach is demonstrated through an illustrative air traffic scenario.     

Assessing the impact of reduced visibility on traffic crash risk using microscopic data and surrogate safety measures

Due to the difficulty of obtaining accurate real-time visibility and vehicle based traffic data at the same time, there are only few research studies that addressed the impact of reduced visibility on traffic crash risk. This research was conducted based on a new visibility detection system by mounting visibility sensor arrays combined with adaptive learning modules to provide more accurate visibility detections. The vehicle-based detector, Wavetronix SmartSensor HD, was installed at the same place to collect traffic data. Reduced visibility due to fog were selected and analyzed by comparing them with clear cases to identify the differences based on several surrogate measures of safety under different visibility classes. Moreover, vehicles were divided into different types and the vehicles in different lanes were compared in order to identify whether the impact of reduced visibility due to fog on traffic crash risk varies depending on vehicle types and lanes. Log-Inverse Gaussian regression modeling was then applied to explore the relationship between time to collision and visibility together with other traffic parameters. Based on the accurate visibility and traffic data collected by the new visibility and traffic detection system, it was concluded that reduced visibility would significantly increase the traffic crash risk especially rear-end crashes and the impact on crash risk was different for different vehicle types and for different lanes. The results would be helpful to understand the change in traffic crash risk and crash contributing factors under fog conditions. We suggest implementing the algorithms in real-time and augmenting it with ITS measures such as VSL and DMS to reduce crash risk.     

平行流交叉口行人过街控制策略研究

为解决平行流交叉口行人与机动车冲突问题,考虑行人与机动车在冲突点为寻找间隙穿越的交替穿插的抢行博弈过程,重新设计行人过街信号相位方案,提出人车搭接相位行人过街模式;考虑行人专用相位过街模式,给出两种行人过街模式的信号控制策略;构建优化模型,并对模型等价变换,降低计算复杂度.结果显示：常规交叉口处于高饱和状态时,两种行人过街模式下平行流交叉口分别降低了73.8%、50.3%的车均延误,故人车搭接相位过街模式效益更优;人车搭接相位过街模式与不考虑行人过街模式相比,交叉口车均延误仅增加 0.6~3.8 s⋅ pcu-1 .研究成果可为平行流交叉口行人信号配时提供理论依据.     

地质雷达在上三高速公路护面墙检测中的应用

上三高速公路K224+720 ～ K225+020左山体自2008年以来,每逢大雨,该山体第二级坡面的长约20m范围内有局部泥沙从泄水孔带出,在对护面墙及碎落台的跟踪检查中,由于局限于目前管理单位的检测设备,未发现空洞、变形.为确保高速公路的安全畅通,此次采用地质雷达对该山体的护面墙进行检测,可快速了解护面墙的厚度、密实度等质量情况.     

设计以人为本的街道——以东莞市东城世博商业圈道路设计为例

中国很多城市道路往往以机动车交通为主要设计对象,而忽视步行和自行车交通.阐述当前世界各大城市和地区以人为本的街道设计理念和趋势,总结国外街道设计基本原则,并辅以国际经验示例.以东莞市东城世博商业圈道路设计为例,阐述商业区、住宅区等人流量较大的区域进行人性化道路设计的要点.通过压缩机动车道数、设计中间分隔带、设置非机动车道、统筹布置设施带等方法,设计更加人性化的道路横断面;通过抬升交叉口、采用较小路缘石半径、交通稳静化措施等方法,设计更加人性化的交叉口.指出以人为本的街道设计有利于创建富有活力、可持续发展的宜居城市.