冲孔灌注桩施工质量控制要点

冲孔灌注桩因其适应性强、成本适中、施工简便等优点,广泛应用于公路桥梁工程建设中。文章详细介绍了冲孔灌注桩成孔、成桩施工各环节的质量控制要点,为类似桩基施工提供技术参考。     

U型管式换热器的质量控制

U型管式换热器属于列管换热器的一种,被广泛应用在循环水冷却高温气体装置中。根据U型管式换热器的结构特点和技术原理,针对设备在使用过程中可能出现的问题,在整个材料采购和制造过程中,对换热器中管板制造加工、U型管成形及换热管与管板的焊接等制造的关键和难点予以质量控制,保证产品质量,使设备按设计要求制造完毕后安全有效地运行。     

低温储罐失效分析及预防措施

文中对低温设备温差应力循环所产生的疲劳失效事故进行了分析,目的是防止低温储罐在使用中出现疲劳破坏。文中通过对失效低温设备断口形貌特征的勘察,采用断口分析、焊接缺陷分析、温差应力循环与疲劳载荷分析的方法,得出了低温液体储罐设备在使用中易出现疲劳失效模式的结论。同时,从设计结构、施焊控制、安全泄放装置维护等方面,对低温液体储罐疲劳失效提出了预防措施。     

浅埋小间距矩形顶管掘进姿态控制技术探讨

为解决采用结构分割转换工法（CC工法）建造的某地下停车场小间距隧道群矩形顶管施工中顶管机出现栽头及掘进姿态控制困难的问题,结合项目施工过程的姿态监控数据,对产生栽头及姿态偏差的原因进行理论分析,提出相应的控制技术,并采取现场试验的方法进行效果验证。结果表明： 1）顶管机栽头现象的原因主要有顶管机体重心偏差、漏浆、姿态预留不够、后靠不稳; 2）通过设备和管节定位处理、洞门密封处理、增加始发姿态预留量、后靠稳定性控制等措施可有效防止顶管机栽头; 3）始发阶段采取洞门预留、破除等控制措施,掘进阶段控制掘进速度并辅以“E”型导向槽进行轴线控制等措施,可有效控制顶管机顶进姿态; 4）通过采取调整铰接油缸行程差、主推油缸行程差及姿态偏差方向的土压等姿态纠偏技术措施,取得了良好的施工效果。     

Predictive power of inspection outcomes for future shipping accidents – an empirical appraisal with special attention for human factor aspects

This paper investigates whether deficiencies detected during port state control (PSC) inspections have predictive power for future accident risk, in addition to other vessel-specific risk factors like ship type, age, size, flag, and owner. The empirical analysis links accidents to past inspection outcomes and is based on data from all around the globe of PSC regimes using harmonized deficiency codes. These codes are aggregated into eight groups related to human factor aspects like crew qualifications, working and living conditions, and fatigue and safety management. This information is integrated by principal components into a single overall deficiency index, which is related to future accident risk by means of logit models. The factor by which accident risk increases for vessels with above average compared to below average deficiency scores is about 6 for total loss, 2 for very serious, 1.5 for serious, and 1.3 for less-serious accidents. Relations between deficiency scores and accident risk are presented in graphical format. The results may be of interest to PSC authorities for targeting inspection areas, to maritime administrations for improving asset allocation based on prediction scenarios connected with vessel traffic data, and to maritime insurers for refining their premium strategies.     

里海远洋渔船无人机舱系统研究

针对我国远洋渔船装备落后、操纵性差、机舱环境恶劣、电站管理水平低、劳动强度大以及渔船机舱自动化水平低等问题,介绍里海远洋渔船无人机舱系统的设计与组成。通过采用主机遥控系统、电站功率管理系统、机舱监测报警系统以及网络通信等技术,将自动化、电气化、信息化和智能化控制技术等船舶前沿科技应用于实船,构建一个满足法国船级社(BV)机舱自动化最高等级AUT-UMS要求的无人机舱系统,以提高远洋渔船的操控性、安全性和可靠性,提升供电系统自动化管理水平,改善作业人员工作环境。对该自动化系统的效果和特点进行分析,结果可为我国远洋渔船自动化系统的研究提供策略和思路。     

斜拉索-磁流变阻尼器多性能约束下的减振控制算法

提出一种极点和方差指标约束下的斜拉索-磁流变减振控制算法。基于Halmiton原理与切比雪夫级数求解方法建立斜拉索-阻尼器减振控制系统状态空间方程。以极点表达减振控制快速性和稳定性约束,以方差表达小振幅和振速约束,基于凸优化理论,给出满足相容快速性、稳定性、小振幅以及振速指标约束下的磁流变半主动减振控制算法。最后,以某斜拉桥C20号斜拉索为例进行仿真验证。结果表明,给出的减振控制算法能保证斜拉索在随机外界激励下的快速性稳定性,且有效抑制拉索的振幅,减振效果良好。     

存在饱和输入的欠驱动船舶航迹跟踪控制

针对控制输入存在饱和限制的欠驱动船舶的航迹跟踪问题,提出鲁棒饱和控制方法。以船舶纵向速度和艏向角速度为虚拟输入,设计饱和运动学控制器,并引入二阶滤波器形式对控制器进行简化;利用反步法并引入Nussbaum型函数,设计饱和动力学控制器,以实现对任意光滑航迹的跟踪控制,并保证跟踪误差收敛至零点附近的一个有界区域内。仿真算例验证了设计方法的有效性和鲁棒性。     

Environmental impacts of public transport systems using real-time control method

Public Transport (PT) systems rely more and more on online information extracted from both operator’s intelligent equipment and user’s smartphone applications. This allows for a better fit between supply and demand of the multimodal PT system, especially through the use of PT real-time control actions/tactics. In doing so there is also an opportunity to consider environmental-related issues to approach energy saving and reduced pollution. This study investigates and analyses the benefits of using real-time PT operational tactics in reducing the undesirable environmental impacts. A tactic-based control (TBC) optimization model is used to minimize total passenger travel time and maximize direct transfers (without waiting). The model consists of a control policy built upon a combination of three tactics: holding, skip-stops, and boarding limit. The environmental-related measure is the global warming potential (GWP) using the life cycle assessment technique. The methodology developed is applied to a real life case study in Auckland, New Zealand. Results show that TBC could reduce the GWP by means of reduction of total passenger travel times and vehicle travel cycle time. That is, the TBC model results in a 5.6% reduction in total GWP per day compared with an existing no-tactic scenario. This study supports the use of real-time control actions to maintain a reliable PT service, reducing greenhouse gas emissions and subsequently moving towards greener PT systems.     

深海拖曳系统自稳定二级拖体姿态控制研究

二级深拖系统具有可控性强、母船扰动弱等优点,是重要的海洋探测平台。在实际工作中,二级拖体姿态稳定是保证探测数据准确的基本前提。本文以具有自主调节功能的二级拖体为例,对其姿态控制进行研究。首先建立了二级拖缆的“弹簧——阻尼”模型,并在此基础上建立了二级深拖系统的数学模型。其次根据该系统具有非线性、时变性等特点,设计了具有参数自修正功能的模糊自适应PID控制器,以实现在不同工况下对二级拖体的姿态进行控制。仿真结果表明,未加载控制器时,海况变化对拖体姿态有显著影响,其俯仰角和横滚角均会发生大范围波动。加载模糊自适应PID控制器后,拖体通过自主调节,能够使姿态波动控制在较小范围,从而满足工作要求,验证了拖缆数学模型的正确性和所采用的控制方法的可行性。