Building and Researching the Bidding Model Based on the Cost of Power Plant

A bidding model of neural network was presented to pursue the largest benefit according to the policy of separating power plants from network and bidding transaction. This model bases on the cost of power plant and its research object is a power plant in the market. The market clearing price (MCP) can be predicted and an optimized load curve can be decided in this model. The model may provide technical support for the power plant.     

反激式开关电源EMI传导骚扰的抑制

阐述反激式开关电源在工作中产生EMI传导骚扰的原因,分析了骚扰的根源和传播途径,提出对开关电源设计中在电路滤波设计方面来抑制EMI传导骚扰,并通过设计实例进行仿真.     

高速公路综合信息管理系统设计与实现

针对目前高速公路的特点和实际情况,提出建立高速公路综合信息管理系统,并给出设计方案.采用B/S和三层C/S结构的混合机制,结合地理信息系统(GIS),通过ASP.NET构建系统网络平台,使用Delphi7开发B/S和三层C/S混合结构的分布式数据库系统,实现综合信息管理系统在重庆高速公路上的应用.     

电火花小孔内圆磨床脉冲电源的仿真设计

从实际应用的角度出发,全面介绍了利用EDA软件仿真设计电火花小孔内圆磨床脉冲电源电路PCB电路板的整个过程。     

The impact of road grade on carbon dioxide (CO2) emission of a passenger vehicle in real-world driving

To accurately estimate real-world vehicle emission at 1 Hz the road grade for each second of data must be quantified. Failure to incorporate road grade can result in over or underestimation of a vehicle’s power output and hence cause inaccuracy in the instantaneous emission estimate. This study proposes a simple LiDAR (Light Detection And Ranging) – GIS (Geographic Information System) road grade estimation methodology, using GIS software to interpolate the elevation for each second of data from a Digital Terrain Map (DTM). On-road carbon dioxide (CO₂) emissions from a passenger car were recorded by Portable Emission Measurement System (PEMS) over 48 test laps through an urban-traffic network. The test lap was divided into 8 sections for micro-scale analysis. The PHEM instantaneous emission model (Hausberger, 2003) was employed to estimate the total CO₂ emission through each lap and section. The addition of the LiDAR-GIS road grade to the PHEM modelling improved the accuracy of the CO₂ emission predictions. The average PHEM estimate (with road grade) of the PEMS measured section total CO₂ emission (n = 288) was 93%, with 90% of the PHEM estimates between 80% and 110% of the PEMS recorded value. The research suggests that instantaneous emission modelling with LiDAR-GIS calculated road grade is a viable method for generating accurate real-world micro-scale CO₂ emission estimates. The sensitivity of the CO₂ emission predictions to road grade was also tested by lessening and exaggerating the gradient profiles, and demonstrates that assuming a flat profile could cause considerable error in real-world CO₂ emission estimation.     

铁路电力线路故障自动处理方法研究

电力线路中的电压或电流波遇到波阻抗发生突变,将产生折射和反射。利用这一原理可以诊断线路是否存在短路或接地故障。依据此原理并考虑铁路电力线路的特点,研究开发的新型电力线路故障自动处理装置,经实际运行考核,表明该方法实用可行。     

长自回归谱的快速滤波算法

本文提出一种快速递推滤波算法,用于估计自回归(AR)模型系数。数值试验表明高分辨率的功率谱都是由高阶AR模型构成,高阶范围内有一最佳阶数存在,由于本算法是一种最优滤波算法,对噪声不敏感,小数据量时优于Marple算法,大数据量时优于快速付利叶变换,从文献记载的结果以及我们计算的实例看,有较高的分辨率。从本算法原理还能派生出若干类似算法。     

鱼雷热动力系统工作温度整体计算模型及有限元法应用研究

文章建立了稳态条件下鱼雷热动力系统工作温度整体计算模型,通过算例验证了模型的正确性.用计算模型和有限元法相结合,应用I-DEAS有限元分析软件对重型鱼雷内层气缸套和活塞进行了温度场有限元计算,得到了可信的温度分布结果.     

潜艇AIP系统和燃料电池

德国在常规潜艇中成功地加装了燃料电池AIP系统,这是燃料电池最为成功的应用实例.这种成功首先来源于燃料电池具有本质上的优越性.同时也发挥了燃料电池的主要长处(能量转换效率高、比能量高、副产物是水),避免了燃料电池的短处(价格高,使用寿命目前还不够长),为燃料电池的开发提供了范例.     

蛋白质结构预测二维连续模型研究

利用模拟退火算法解NP完全问题的有效性，对新近提出的蛋白质结构预测问题的二维连续模型作了另解，并基于平面表达的清晰与美观将原模型作了相应的修改．最后，比较了模拟退火算法与原拟物算法的优劣，指出了另解具有的几个优点：去掉了物理背景，只作为一个纯数学问题来求解，有利于在计算机上实现；模拟退火算法收敛速度更快且精度更高。