录音技术在铁路频率信号测试领域的应用

ZPW-2000A系列低频信号丰富、载频种类多,专用测试机具价格贵。因此,提出将录音技术用于铁路频率信号测试领域,建立标准频率信号资源库,替代低频信号源。以ZPW-2000A、UM71系列设备的检测为例,介绍标准频率信号资源库的原理、制作和应用。     

更高速度条件下铁路简支箱梁关键参数研究

针对梁体基频、竖向刚度等参数,概述我国高速铁路桥梁参数的研究思路及成果、参数设计及运营现状,采用车桥竖向相互作用程序分析铁路简支箱梁动力响应规律。结果表明,梁体基频为设计参数的控制因素,梁体实测梁体基频高于设计值和规范限值,梁体刚度存在一定的储备;时速350 km的高速铁路简支箱梁可适应更高速度420 km/h的运营要求;420 km/h速度等级高速铁路简支箱梁关键参数可参考350 km/h速度等级相关参数;40 m跨度车桥动力响应明显降低,梁体基频等动力参数不再控制梁体设计,建议开展高速铁路更大跨度简支箱梁应用研究。     

纵向受压构件的横向固有频率与纵向力关系的研究

研究了简支纵向受压杆件和板结构的横向固有频率与临界荷载，得出固有频率的平方与纵向 力成线性关系的结论，表明ω2～P的关系是一条直线。     

Multimodal travel groups and attitudes: A latent class cluster analysis of Dutch travelers

For developing sustainable travel policies, it may be helpful to identify multimodal travelers, that is, travelers who make use of more than one mode of transport within a given period of time. Of special interest is identifying car drivers who also use public transport and/or bicycle, as this group is more likely to respond to policies that stimulate the use of those modes. It is suggested in the literature that this group may have less biased perceptions and different attitudes towards those modes. This supposition is examined in this paper by conducting a latent class cluster analysis, which identifies (multi)modal travel groups based on the self-reported frequency of mode use. Simultaneously, a membership function is estimated to predict the probability of belonging to each of the five identified (multi)modal travel groups, as a function of attitudinal variables in addition to structural variables. The results indicate that the (near) solo car drivers indeed have more negative attitudes towards public transport and bicycle, while frequent car drivers who also use public transport have less negative public transport attitudes. Although the results suggest that in four of the five identified travel groups, attitudes are congruent with travel mode use, this is not the case for the group who uses public transport most often. This group has relatively favorable car attitudes, and given that many young, low-income travelers belong to this group, it may be expected that at least part of this group will start using car more often once they can afford it. Based on the results, challenges for sustainable policies are formulated for each of the identified (multi)modal travel groups.     

浅谈车用油耗器测量电路的优化设计

车用油耗器设计中测量电路的设计是关键技术,重点介绍了分频技术和M/T测速技术的优点、原理和在设计中的应用方法。     

高疲劳抗力钢桥面板的疲劳问题Ⅱ：结构体系抗力

为了深刻认识高疲劳抗力钢桥面板的疲劳特性，准确评估其结构体系的疲劳抗力，基于等效结构应力建立了考虑焊接微裂纹对钢桥面板疲劳性能劣化效应的结构体系疲劳抗力评估方法，并通过疲劳试验对所建立的评估方法进行了验证。在此基础上采用所建立的结构体系疲劳抗力评估方法对高疲劳抗力钢桥面板的疲劳开裂模式、疲劳抗力及其影响因素等相关关键问题进行系统研究。研究结果表明：焊接微裂纹的存在会显著降低钢桥面板的疲劳性能，导致主导疲劳开裂模式发生迁移；结构体系设计参数对纵肋与顶板双面焊构造细节和纵肋与横隔板新型交叉构造细节疲劳性能的影响有显著区别，其中纵肋与顶板双面焊构造细节的疲劳性能主要对顶板厚度的变化较为敏感，其疲劳性能随着顶板厚度的增加而显著提升，而纵肋与横隔板新型交叉构造细节的疲劳性能同时受多个参数的影响，其疲劳性能随着顶板厚度、横隔板厚度和纵肋高度的增大而提升，随着横隔板间距和纵肋底板与横隔板之间焊缝长度的增大而降低；传统钢桥面板的主导疲劳开裂模式为纵肋腹板与横隔板交叉构造细节围焊焊趾开裂，高疲劳抗力钢桥面板的主导疲劳开裂模式为纵肋底板与横隔板交叉构造细节纵肋焊趾开裂；相对于传统正交异性钢桥面板，高疲劳抗力钢桥面板结构实现了主导疲劳开裂模式的迁移，疲劳性能显著提高。     

机车活塞式空气压缩机管道振动分析

针对目前机车活塞式空气压缩机工作时管道振动大、噪声大的现象,通过计算管系的结构固有频率、气柱固有频率和压力脉动,分析了管道振动的原因,提出了综合使用缓冲器减振、孔板减振和支撑结构等措施。     

基于超高速AD9954的多模式信号的实现

通过对AD9954采用先进DDS技术性能特点的具体分析，利用其可编程幅度、频率、相位给出AD9954在高速调制信号系统中的应用方案，从而较方便容易地实现基于软件无线电技术的各种调制信号。     

机车信号邻线干扰问题研究

针对机车运行过程中可能出现的邻线干扰问题,提出一种基于欠采样原理的本线信号低频信息提取法。该方法通过对邻线与本线的混合信号进行频谱分析,确定信号的载频频率成分,进而提取出本线信号的低频信息。实验证明,当邻线信号与本线信号以电流强度3∶1混合时,该方法仍能准确地提取低频信息,具有较高的实时性及频谱分辨率。