城市轨道交通中压网络供电分区的划分

以主变电所集中供电的中压网络为基础,从建设、运营经济性、过补偿和继电保护设置配合方面,分析供电分区划分应考虑的问题;网络构成及供电分区的划分位置应考虑与运行交路的结合,最大限度地满足车辆的运行,不因网络局部故障造成全线车辆停运.供电分区的划分在满足规范要求电压损失的前提下,尽可能减少供电分区的数量,以使工程具有较好的经济性.提出在满足继电保护要求等的前提下,线路电压损失要求是中压网络供电分区划分从建设和运营经济性考虑的合理结合点.     

直线电机轨道交通地面电阻制动的研究

对采用地面电阻制动的城市轨道直流牵引供电系统模型进行介绍,利用Matlab软件对该系统建立了供电网络结构图,利用节点电压法构造矩阵方程,并对此引入的非线性方程组用牛顿迭代法求解.基于地面电阻制动仿真系统(GRBSS),得出电压、电流等结果,对地面制动电阻的容量计算方法和位置设置原则进行探讨.     

直线电机轮轨交通系统牵引坡度及启/制动距离计算研究

直线电机轮轨交通是一种采用直线感应电机LIM牵引的新型城市轨道交通形式.在分析直线电机轮轨系统列车牵引和制动特性的基础上,从列车受力分析的角度,建立直线电机线路参数分析的模型;利用该模型,计算得到直线电机轮轨线路的安全牵引坡度及启/制动距离.     

Emission rates of intermodal rail/road and road-only transportation in Europe: A comprehensive simulation study

Intermodal rail/road transportation combines advantages of both modes of transport and is often seen as an effective approach for reducing the environmental impact of freight transportation. This is because it is often expected that rail transportation emits less greenhouse gases than road transportation. However, the actual emissions of both modes of transport depend on various factors like vehicle type, traction type, fuel emission factors, payload utilization, slope profile or traffic conditions. Still, comprehensive experimental results for estimating emission rates from heavy and voluminous goods in large-scale transportation systems are hardly available so far. This study describes an intermodal rail/road network model that covers the majority of European countries. Using this network model, we estimate emission rates with a mesoscopic model within and between the considered countries by conducting a large-scale simulation of road-only transports and intermodal transports. We show that there are high variations of emission rates for both road-only transportation and intermodal rail/road transportation over the different transport relations in Europe. We found that intermodal routing is more eco-friendly than road-only routing for more than 90% of the simulated shipments. Again, this value varies strongly among country pairs.     

Cost-effectiveness of reductions in greenhouse gas emissions from High-Speed Rail and urban transportation projects in California

A rising trend in state and federal transportation finance is to invest capital dollars into projects which reduce greenhouse gas (GHG) emissions. However, a key metric for comparing projects, the cost-effectiveness of GHG emissions reductions, is highly dependent on the cost-benefit methodology employed in the analysis. Our analysis comparing California High-Speed Rail and three urban transportation projects shows how four different accounting framings bring wide variations in cost per metric tonne of GHG emissions reduced. In our analysis, life-cycle GHG emissions are joined with full cost accounting to better understand the benefits of cap-and-trade investments. Considering only public subsidy for capital, none of the projects appear to be a cost-effective means to reduce GHG emissions (i.e., relative to the current price of GHG emissions in California’s cap-and-trade program at $12.21 per tonne). However, after adjusting for the change in private costs users incur when switching from the counterfactual mode (automobile or aircraft) to the mode enabled by the project, all investments appear to reduce GHG emissions at a net savings to the public. Policy and decision-makers who consider only the capital cost of new transportation projects can be expected to incorrectly assess alternatives and indirect benefits (i.e., how travelers adapt to the new mass transit alternative) should be included in decision-making processes.     

穿越古滑坡川主寺隧道围岩破坏特征及稳定性研究

文章以川主寺隧道所处的工程地质条件为基础,通过现场调研分析了隧道围岩变形破坏形式主要为坍塌、掉块以及剥落.围岩稳定性三维有限元数值模拟结果显示,碎裂围岩自稳能力差,围岩变形以弹塑性变形、松弛变形为主;H型钢拱架支护结构对碎裂围岩稳定性起到积极的作用,并通过典型洞段现场位移监测数据分析结果得以证实.     

低温储罐失效分析及预防措施

文中对低温设备温差应力循环所产生的疲劳失效事故进行了分析,目的是防止低温储罐在使用中出现疲劳破坏。文中通过对失效低温设备断口形貌特征的勘察,采用断口分析、焊接缺陷分析、温差应力循环与疲劳载荷分析的方法,得出了低温液体储罐设备在使用中易出现疲劳失效模式的结论。同时,从设计结构、施焊控制、安全泄放装置维护等方面,对低温液体储罐疲劳失效提出了预防措施。     

X80管线钢管的屈强比对其失效评估曲线的影响

X80及以上级别管线钢管的高屈强比是工程应用中的一个突出问题,失效评估曲线是其安全评定的重要依据。文中通过单轴拉伸和断裂韧性试验建立了高屈强比X80管线钢管的特征失效评估图及拟合方程。结果表明：随着钢管屈强比升高,失效评估曲线的截至线（最大载荷比）降低;高、低屈强比钢管的评估曲线在载荷比大于某一临界值时发生分离,且高屈强比钢管的评估曲线处于低屈强比钢管的评估曲线之下;高屈强比钢管的选择3评估曲线比选择1和选择2曲线更偏于安全。     

半径250m曲线无缝线路稳定性分析及加强措施

本文通过分析不同工况对半径250 m曲线无缝线路临界轨温的影响,合理确定半径250m曲线作业轨温范围及稳定性影响因素.结合现场养护维修过程中遇到的问题和设备整修方法,从钢轨选用及修理、轨枕选用、道床修理等方面提出半径250 m曲线稳定性控制措施.     

防止电力机车进入无电单元(区)的安全预警方法

针对目前计划内接触网停电时电力机车进入无电单元(区)的问题,提出了基于动态停电作业区域数据对比库语音、屏幕鼠标点击坐标和高清成像分析进行"三元素二阶段"处理对比方法,以减少人员操作失误和损失.机车/车次信息及对应机车属性先由操作人员办理接发列预告(办理闭塞)的语音识别获取,再通过TDCS/CTC终端机非上位机获取并核对...