近距大跨超浅埋双洞分修隧道穿越铁路施工技术

杭州解放路延伸线新城隧道采用左、右线双洞分修型式，具有埋深浅、跨度大、间距小的特点，穿越地层地质差，同时需下穿既有沪杭铁路线，施工技术含量极高。文章介绍了穿越铁路段施工中采用的综合技术及相应的针对性辅助施工措施，结合监测信息反馈，分析阐释了浅埋暗挖法及其综合配套技术在施工实际中的成功应用，具有重要的现实意义。     

基于道路设计与交通规划的道路选线优化模型

结合道路设计理论与交通规划理论,以地理信息系统为平台,开发道路选线优化模型。该模型是一个费用指向的优化问题,最小化费用目标函数中包括道路建设费用、土方工程费、道路交通诱发的环境污染的不经济费用,OD交通在路网上总走行时间的时间费用等。优化模型首先随机生成新建道路的空间位置候选方案集,并自动设计新建道路的平曲线和竖曲线,计算新建道路的各项工程费用。然后,对变化的路网进行自动拓扑,通过交通量分配得到OD交通在新路网上的走行时间和交通流特征,计算OD交通的环境负荷。最后,在遗传算法中判断候选方案的优劣,直到得到一个最佳的新建道路的空间位置方案为止。     

宜万铁路别岩槽隧道F3 断层突发性涌水治理

宜万铁路别岩槽隧道F3断层在初期支护完成后,由于受地表强降雨影响,突发大规模涌水,使初期支护严重变形。文章主要介绍了F3断层的涌水事故、应急预案,以及通过采取“径向注浆加固-初期支护加强-及时施作二次衬砌”等综合技术措施,有效地治理了F3断层涌水-变形段。     

铁路无梁板连续刚构桥技术设计

结合张家口市下广公铁立交桥工程实例,阐述铁路无梁板钢筋混凝土连续刚构桥的技术设计特点及有关问题的处理方式,连续刚构桥具有跨越能力大、与同跨度的连续梁和简支梁比较其梁高最低的优点,该工程的顺利建成通车,为类似桥梁设计提供了一定的借鉴经验。     

贵州水柏铁路北盘江大桥钢管拱转体施工技术

北盘江大桥是第一座单线铁路上承式钢管拱桥，跨度为236m。介绍钢管拱工厂单元制造、工地拼装焊接，钢管拱桥的转体结构、线形控制，以及半拱万吨单铰转体合龙的施工技术。     

国产电力机车“十五”展望

阐述了国外电力机车的发展趋势及我国电力机车生产的现状，指出电力机车制造企业要占领市场，就必须具备良好的技术实力，大力提升工艺水平。     

深圳地铁14号线黄木岗站三线换乘方案研究

深圳地铁14号线黄木岗站与既有7号线、近期规划24号线黄木岗站形成地下三线换乘车站，车站周边环境复杂。如何综合各种边界条件形成建筑功能完善，结构经济安全，同时又对周边环境影响最小的方案是本站研究的重点，特别是车站站位及换乘功能的研究。方案设计过程中，通过逐一梳理地面建筑、地下建(构)筑物、地面交通、片区规划、工程地质条件、客流预测、车站换乘功能等边界条件，总结黄木岗站立交桥安全、交通疏解、管线改迁、结构工法、施工器具选择、车站站位及换乘功能等重难点，采取逐项突破的方法，最终推演出“干”字形节点换乘方案，其中14号线采用地下3层双叠侧式车站，与7号线形成平行同台换乘，与24号线形成台-台换乘。     

Optimizing the locations of electric taxi charging stations: A spatial–temporal demand coverage approach

Vehicle electrification is a promising approach towards attaining green transportation. However, the absence of charging stations limits the penetration of electric vehicles. Current approaches for optimizing the locations of charging stations suffer from challenges associated with spatial–temporal dynamic travel demands and the lengthy period required for the charging process. The present article uses the electric taxi (ET) as an example to develop a spatial–temporal demand coverage approach for optimizing the placement of ET charging stations in the space–time context. To this end, public taxi demands with spatial and temporal attributes are extracted from massive taxi GPS data. The cyclical interactions between taxi demands, ETs, and charging stations are modeled with a spatial–temporal path tool. A location model is developed to maximize the level of ET service on the road network and the level of charging service at the stations under spatial and temporal constraints such as the ET range, the charging time, and the capacity of charging stations. The reduced carbon emission generated by used ETs with located charging stations is also evaluated. An experiment conducted in Shenzhen, China demonstrates that the proposed approach not only exhibits good performance in determining ET charging station locations by considering temporal attributes, but also achieves a high quality trade-off between the levels of ET service and charging service. The proposed approach and obtained results help the decision-making of urban ET charging station siting.     

Ordered median hub location problems with capacity constraints

The Single Allocation Ordered Median Hub Location problem is a recent hub model introduced in Puerto et al. (2011) that provides a unifying analysis of a wide class of hub location models. In this paper, we deal with the capacitated version of this problem, presenting two formulations as well as some preprocessing phases for fixing variables. In addition, a strengthening of one of these formulations is also studied through the use of some families of valid inequalities. A battery of test problems with data taken from the AP library are solved where it is shown that the running times have been significantly reduced with the improvements presented in the paper.     

高速铁路开行160km/h普速列车信号系统适应性研究与应用

针对目前160 km/h普速列车上线高速铁路运行的需求,进行技术方案可行性分析,从普速列车运行到动车组安全防护、过走防护进行研究。最后以兰新第二双线为例,提出适应实际工程的普速列车上线运行的技术方案。