铁路96m双线钢桁架梁顶推施工技术

介绍了铁路96 m双线简支钢桁架梁顶推施工技术,该技术因地制宜充分利用现场的辅路空间,采用上滑道集中、下滑道间隔连续,军用八三墩搭设临时墩方法,完成了钢桁梁顶推架设。另外还介绍了在顶推和落梁过程中应该注意的问题。     

南京大胜关长江大桥三桁钢桁梁施工技术

南京大胜关长江大桥是京沪高速铁路的重点工程,主桥采用三主桁空间桁架结构,该桥结构新颖,技术含量高,建设规模大。钢梁刚度、重量大,安装支点反力大,悬臂跨度长,合龙端挠度、转角大,合龙点多,钢梁施工难度大。介绍了南京大胜关长江大桥六跨连续三桁钢桁拱桥在吊索塔架及三层平索的辅助下从两侧往跨中架设、跨中合龙的施工技术,以及主跨和边跨合龙所采用的＂长圆孔＋圆孔＂合龙铰技术,可为类似桥梁的施工提供一定的借鉴作用。     

思贤窖大桥四线铁路宽桁斜拉桥关键技术研究

研究目的:贵广铁路思贤窖特大桥主桥为(58.5+109.25+230+109.25+58.5)m四线铁路斜拉桥,为国内首座四线铁路采用两片主桁的大跨度宽桁斜拉桥。主梁采用两片主桁,桁宽24 m,主桁采用三角形桁式,桥面系采用带边纵梁和水平K撑的密横肋体系。本文对宽桁断面、桁式以桥面系构造和动力性能等关键技术进行了研究,为类似工程提供参考。研究结论:四线铁路宽桁斜拉桥,四线横梁跨度大,梁跨中、端部弯矩巨大,传递给主桁的面外弯矩较大。研究表明:无吊杆无竖向K撑横断面的三角形主桁桁式,有效地减小横梁跨度,同时每个下弦节点处的两根腹杆共同承受面外较大弯矩。带水平K撑和边纵梁的桥面系,通过改变力的传力途径,使主桁只受节点力,改善了横梁和主桁的受力。通过对宽桁断面、桁式以及对带边纵梁和水平K撑密横肋体系桥面系的创新性研究,成功地解决了四线铁路宽桁斜拉桥设计中的技术难题。     

P62系列棚车内顶板丢失原因分析及改进建议

分析了P₆₂系列棚车内顶板丢失原因并提出了改进建议。     

HXD1B型机车用BT25.07高压隔离开关的参数计算

HXD1B型机车用BT25.07高压隔离开关额定电流提升至700 A,文章对高压隔离开关额定电流提升导致的温升及动热稳定性问题进行了技术分析,并对相关参数进行计算.     

集通线沙力河大桥置换桥墩、梁体顶升复位快速抢修施工技术

介绍了集通铁路抢险中临时桥墩施工和梁体顶升复位施工技术,为类似工程采用贝雷桁架支墩及梁体顶升的抢险施工提供参考和借鉴。     

大体积盖梁钢管桁架法施工设计

济南二环东路高架桥工程第三合同段跨胶济铁路段上部结构为简支变连续小箱梁,下部结构为门式墩,墩高18.1～25.5 m,墩顶设大体积盖梁,梁高达3 m,仅2.6 m宽,净跨24.7 m,施工难度大。以第114号盖梁为例,介绍了大体积盖梁的钢管桁架法施工设计。     

渝怀线长寿长江大桥荷载试验研究

渝怀线长寿长江大桥为双线下承式连续钢桁梁,介绍桥梁静动力试验成果,结合有限元理论分析,将试验结果与计算结果及规范值进行比较,评价桥梁现状。     

Punching Shear Behavior of RC Slab-Column Connections with Nonrectangular Columns

This paper present an experimental study on the RC slab-colunm connections with nonrectangular colunms, namely cross-shaped column, T-shaped column and L-shaped column. The punching shear deformation and strength characteristics of slab-column connections with nonrectangular columns under punching shear load are investigated. Nine specimens with the three kinds of nonrectangular columns and two reference specimens with square columns are tested. The tested ultimate loads, deformations, and failur emodes of specimens are presented and discussed. Test results reveal that the punching shear strength and ductility of the connections with nonrectangular columns are higher than those of the corresponding connections with square columns, and also prove that the application of nonrectangular columns to flat-plate structure was feasible. Based on the test results, one method of calculating punching shear strength of connections with nonrectangular columns is proposed, which conforms with the current design practice of China. The test results on the punching shear strength are compared with the predictions of the formulas proposed by codes of several different countrie; and the predictions given by ACI code and China code are found to be conservative as the reinforcement ratio is increased.     

三岸邕江特大桥悬臂拼装钢桁拱施工监控方法

文章结合三岸邕江特大桥工程实例,对比分析了悬臂拼装钢桁拱的施工监控特点,阐述了悬臂拼装钢桁拱施工监控的主要内容及组织实施流程。