内燃机连杆设计计算的若干理论研究

在对多种连杆大量计算的基础上，总结了连杆设计的经验，指出连杆大端对称于中心线的两侧刚度分布均匀，是保证其应力分布均匀的前提，是连杆合理设计的一个重要原则．文中提出，为了保证精度，连杆计算应采用多体接触模型，并对影响计算精度的各种因素做了分析。讨论了螺栓位置和预紧力应如何选取以及齿形制造误差对强度的影响。     

增力式多向镦锻装置的研制

在通用压机上生产类似全纤维曲轴一类锻件的先进工艺为多向镦锻法。本文设计的新型增力式多向钮锻装置，在锻造接近结束时，可以增大水平锹粗力，其增力效果超过传统的ＲＲ锻造法及ＴＲ锻造法。     

Reliability-based calibration of fatigue design guidelines for ship structures

A simple reliability-based framework is applied to calibrate a new set of fatigue design guidelines. This new guideline considers two different approaches for the assessment of both loads, stresses and local stress raising effects, and partial safety factors must be given for any combination of these approaches. For the calibration, the lognormal reliability format is adopted because the hereby-derived partial safety factors can be combined arbitrarily. This means that with a few basic partial safety factors, the combination of partial safety factors to be applied together with any combination of calculation approaches can be determined easily. In the present paper both the adopted reliability format, the applied modeling of uncertainties and the selected target safety index are explained. Based on this, a new guideline is calibrated and the derived partial safety factors are presented. Finally, the new guideline is applied through a numerical example in order to show the applicability of the calibrated partial safety factors, and satisfactory results are found.     

流函数法在减径拔管上限分析中的应用

应用流函数法建立减径拔管的动可容速度场，用上限原理得出减径拔管的上限解，分析了摩擦状态，变形程度及相对壁厚等工艺参数对拉拔载荷的影响，从而得出最佳工艺参数。     

捷达轿车故障排除及原因分析

介绍了捷达轿车的一些故障排除方法并对产生故障的原因进行了分析。     

应用复合梁单元实现钢管混凝土拱桥的极限承载力分析

进行大跨度钢管混凝土拱桥的极限承载力分析,需要综合考虑几何和材料非线性、混凝土收缩和徐变、温度变化等多种因素的影响。本文从固体力学的基本理论出发,建立适于考虑上述诸多因素的复合梁单元,阐述了基于该单元的钢管混疑土拱桥极限承载力分析程序的实现方法,并通过与一个哑铃形截面钢管混凝土组合式拱肋极限承载力试验结果的对比验证了其可行性。     

Mobile phone use while driving: public opinions on restrictions

This paper reviews two road-user surveys on the use of mobile phones on the road in Finland where the mobile phone ownership rate is highest in the world (70% in August 2000). From 1998 to 1999 the proportion of drivers that chose to use a mobile phone while driving rose from 56% to 68%, while the proportion of phone using drivers who experienced dangerous situations due to phone use rose from 44% to 50%. The proportion of drivers who used their phones in some way to benefit safety on the road remained at about 55%. The youngest, novice drivers had the highest level of phone usage of all age categories. Over 48% of the interviewees believed that the government should ban the use of hand-held mobile phones while driving, and another 27% believed that all types of mobile phone use should be banned while driving. Those drivers who used their phones the most each day were more likely to want some form of restrictions, than those who had lower usage. This is a strong message to the elected lawmakers and raises the problem of exactly how regulatory bodies would go about controlling the future growth of new driver support and non-driving related communication devices in road vehicles. It was concluded that legislating for hands-free use only would be a reasonable course of action. Mandating that the current generation of equipment should be optimized for hands-free use should result in future generations of in-vehicle equipment also being optimized for hands-free use as a minimum criterion.     

1-50m钢混结合梁施工过程中的稳定性分析

利用SAP84计算程序和根据设计规范手算相结合 ,对 15 0m钢混结合梁施工过程中开口截面钢梁的稳定性进行分析比较 ,介绍建模及计算过程 ;同时根据计算结果 ,揭示结构的薄弱环节 ,并依此检验为防止结构失稳而采取的结构构造措施     

基于支持向量机的可靠性增长费用建模与分析

支持向量机是一种采用结构风险最小化原则代替传统经验风险最小化原则的新型统计学习方法，具有完备的理论基础。首先应用支持向量机原理建立了基于支持向量机的多参数武器装备可靠性增长费用预测模型，然后对我军某型现役装备使用阶段可靠性增长费用数据进行了预测与分析。结果表明，与一般的回归分析相比，基于支持向量机的回归模型具有很好的预测精度。     

对我国建设工程索赔机制运行有关问题的探讨

索赔机制及其运行是实现索赔的重要保证。文章通过对索赔机制的定义及构成分析,阐释了索赔机制的本质及运行影响因素。据此,对我国索赔机制运行中的困境及原因做了剖析,提出了完善我国索赔机制、改善索赔环境的具体措施和建议。