Comparison of HC species from diesel combustion modes and characterization of a heat-up doc formulation

This study summarizes engine speed and load effects on HC species emissions from premixed charge compression ignition (PCI) and conventional diesel combustion, and it evaluates diesel oxidation catalyst (DOC) formulations on a gas flow reactor for the purpose of diesel particulate filter regeneration or lean NO_x trap desulfation. HC emissions are sampled simultaneously by a Tedlar bag for light HC species and by a Tenax TA™ adsorption trap for semi-volatile HC species, and they are analyzed by gas chromatography with a flame ionization detector. The bulk temperature and residence time during combustion are key parameters that are important for understanding the effects of speed and load on engine-out HC emissions. The degree of post-flame oxidation is higher in PCI than in conventional combustion, and it is increased for PCI with a higher speed and load, as indicated by a lower fuel alkanes/THC ratio, a higher alkenes/fuel alkanes ratio, and a higher methane/THC ratio. Ethene and n-undecane are two representative HC species, and they are used as a surrogate mixture in the gas flow reactor to simulate PCI and conventional combustion with in-cylinder post fuel injection. Among the three DOC formulations tested, the catalyst with constituent precious metals of platinum and palladium (PtPd) showed the best light-off performance, followed by PtPd with an addition of cerium dioxide (PtPd+CeO₂), and platinum (Pt), regardless of exhaust compositions. Conventional combustion exhaust composition shows a lower light-off temperature than that of PCI, regardless of catalyst formulation.     

Analysis process of a steering system using a concept model for idle vibration

This paper describes the development of an optimal design process for a steering column system and supporting system. A design guide is proposed at the initial concept stage of the development process to obtain sufficient stiffness of the steering system while reducing the idle vibration sensitivity of the system. Case studies on resonance isolation are summarized, where vibration modes among the systems are separated by applying a vibration mode map at the initial stage of the design process. This study also provides design guidelines for an optimal dynamic damper system using a CAE (computer aided engineering) analysis. The damper FE (finite element) model is added to the vehicle model to analyze the relation between the frequency and the sensitivity of the steering column system. This analysis methodology makes it possible to achieve target performance in the early design stage and reduction of damper tuning activity after the proto car test stage. Through the proposed steering column system development process, a lightweight vehicle with high stiffness is possible prior to the proto build stage. Furthermore, the improved process is expected to contribute to reducing the overall development period and the number of proto car tests necessary to achieve the desired steering system performance.     

土木工程结构健康监测研究进展

阐述了实施土木工程结构健康监测的必要性,介绍了结构健康监测系统的内涵、组成、监控内容、监控系统功能及其工程应用,讨论了结构损伤检测中的两类方法,重点对损伤识别中的动力指纹法、模型修正法、神经网络法、遗传算法进行了分析和比较,阐述了健康监测领域今后的主要研究问题和发展方向.     

综合交通线网规划方案合理性评价内涵探讨

文章从合理性的一般哲学解释出发,论证出综合交通线网规划方案合理性存在的必然性,然后分别从多方式合理分工、各交通线路分阶段整体推进、交通线网投资实施总体控制、交通网络构建符合OD分布规律、以及线网规划目标考虑资源消耗限制等方面,深入分析合理的综合交通体系应具备的特征,并由此推荐系列评价指标集,从而为综合交通线网规划方案合理性评价提供理论依据。     

A link-node complementarity model and solution algorithm for dynamic user equilibria with exact flow propagations

In this paper, we propose a link-node complementarity model for the basic deterministic dynamic user equilibrium (DUE) problem with single-user-class and fixed demands. The model complements link-path formulations that have been widely studied for dynamic user equilibria. Under various dynamic network constraints, especially the exact flow propagation constraints, we show that the continuous-time dynamic user equilibrium problem can be formulated as an infinite dimensional mixed complementarity model. The continuous-time model can be further discretized as a finite dimensional non-linear complementarity problem (NCP). The proposed discrete-time model captures the exact flow propagation constraints that were usually approximated in previous studies. By associating link inflow at the beginning of a time interval to travel times at the end of the interval, the resulting discrete-time model is predictive rather than reactive. The solution existence and compactness condition for the proposed model is established under mild assumptions. The model is solved by an iterative algorithm with a relaxed NCP solved at each iteration. Numerical examples are provided to illustrate the proposed model and solution approach. We particularly show why predictive DUE is preferable to reactive DUE from an algorithmic perspective.     

Wind pressure distribution and wind-induced dynamic response for spatial groined latticed vaults

The wind pressure distribution and wind-induced vibration responses of long-span spatial groined latticed vaults (SGLVs) were numerically simulated, which always are ones of the most important problems in the structural wind resistance design. Incompressible visco-fluid model was introduced, and the standard k-εtwo equation model and semi-implicit method for pressure linked equation (SIMPLE) were used to describe the flow turbulence. Furthermore, the structural dynamic equation was set up, which is solved by Newmark-β method. And several sort of wind-induced vibration coefficients such as the wind-induced vibration coefficient corresponding to the nodal displacement responses and wind loads were suggested. In the numerical simulation where the SGLV consisting of the cylindrical sectors with different curved surface was chosen as the example,the influence on the relative wind pressure distribution and structural wind-induced vibration responses of the closed or open SGLV caused by such parameters as the number of cylindrical sectors, structural curvature and the ratio of rise to span was investigated. Finally, some useful conclusions on the local wind pressure distribution on the structural surface and the wind-induced vibration coefficients of SGLV were developed.     

Improvement of the second order approximation of the smoothed particle hydrodynamics

The smoothed particle hydrodynamics (SPH), as a fully Lagrangian particle method, has been successfully applied to astrophysical problems and extended to elastic dynamics and computational fluid dynamics.High order derivatives have to be approximated when elastic dynamics problems are modeled. However, the approximation errors in SPH could lead to computational failure in the case that the order of derivative is high.A novel method was proposed in order to improve the accuracy of SPH method, which shows the relationship between the selected functions and their SPH approximations. The entire involved system was represented by a finite number of particles that carry individual mass and occupy individual space, and the integral interpolation was approximated by a summation interpolation. In addition, error comparison was made between SPH method with and without the present improvement.     

Joint distortion model for progressive image transmission using error correcting arithmetic codes

A novel joint source channel distortion model was proposed, which can essentially estimate the average distortion in progressive image transmission. To improve the precision of the model, the redundancy generated by a forbidden symbol in the arithmetic codes is used to distinguish the quantization distortion and the channel distortion, all the coefficients from the first error one to the end of the sequence are set to be a value within the variance range of the coefficients instead of zero, then the error propagation coming from the entropy coding can be essentially estimated, which is disregarded in the most conventional joint source channel coding （JSCC） systems. The precision of the model in terms of average peak-signal-to-noise has been improved about 0.5 dB compared to classical works. An efficient unequal error protection system based on the model is developed, and can be used in the wireless communication systems.     

A multi-objective optimal approach to automated construction of sacrificial multi-piece molds

Sacrificial multi-piece molds can be used for producing complex parts. To obtain the optimal design of molds automatically, a multi-objective optimal approach is proposed. Mold pieces number, material utilization and partitioning area are taken as the objective functions, and the machinability of each mold piece is taken as constraint condition. Genetic algorithm (GA) is adopted to realize global optimization of partitioning process. Each mold piece in optimal scheme can be manufactured by milling and drilling operations, which reduce the tooling cost and shorten product cycle obviously. Using the proposed approach, mold design can be significantly automated for making complex parts.     

Multi-try counter-meshing gears discrimination device based on MEMS technology

A multi-try counter-meshing gears (CMG) discrimination device based on micro electromechani-cal system (MEMS) technology was designed for some specified information fields. The discrimination deviceconsists of two groups of metal CMG, two pawl/ratchet mechanisms, two driving micromotors and two re-setting micromotors, which make the CMG withdraw by raising the pawls. The energy-coupling element isa photoelectric sensor with a circular plate which is notched. Micromotor is fabricated using the ultravioletLiGA (UV-LiGA) fabrication process and precision mechanical engineering. The discrimination device has thefunction which can automatically reset, with the correct resetting code, it can be tried another times.