边坡稳定性分析的广义Bishop法

鉴于简化B ishop法作为一种简单实用且精度较高的极限平衡方法却仅限于分析圆弧破坏的缺陷,提出将B ishop法应用于任意滑裂面的广义方法.基于极限平衡理论和简化B ishop法的简化条件,推导其用于一般滑裂面破坏的边坡安全系数计算公式.通过实例分析考证比较该法的精度,并提出取矩中心的确定方法,以保证竖向力简化假设下的精度,为土坡稳定性分析提供了一种简单通用的方法.     

潜艇非稳态流场计算流体力学不确定度分析

依照ITTC推荐规程对美国DARPA潜艇模型SUBOFF光体在不考虑自由表面情况下的CFD计算进行不确定度分析。选取中间尺度的时间步长,验证中采用细、中、粗三套网格。在最精细的网格上进行不同时间步长的研究。最后对潜艇表面压力计算进行确认。     

盾构施工筹划原则及影响因素分析

以北京地铁4号线11合同段(灵境胡同-新街口)四站三区间的盾构施工筹划为例,重点分析影响盾构施工筹划的因素;以方案比较的方法,介绍了确定三区间总体筹划方案的详细过程.     

浅谈城市公共交通存在的问题及建议——以兰州市为例

目前,城市公共交通中存在很多问题,单纯依靠道路建设和交通管理来扩大路网供应能力不能解决交通拥挤问题,交通需求总是趋于超过道路供给。如果没有有效的措施来抑制个体交通的拥有和使用,将导致城市交通的全面恶化。因此,在完善道路网络的同时,必须尽快建立有竞争力的公共交通体系,支持城市的可持续发展。     

水泥混凝土裂缝成因的分析与处理

水泥混凝土产生裂缝是目前工程建设中普遍存在的质量通病,对裂缝的成因进行分析并提出预防措施和处理方法．是一项十分重要的工作。     

Sustainability and interactivity between cities and ports: a two-stage data envelopment analysis (DEA) approach

Ports and cities are intrinsically linked. Port city, which serves as a link between the local and global economy, is an integration of both urban and port systems. Constrained by different regional structures, port cities have developed various formulations over time. Using a two-stage data envelopment analysis (DEA) approach, this paper proposes a new method for measuring the sustainable development of different port city systems. While the previous empirical studies often separate the port system and the urban system, this paper assesses the two systems in an integrated way. Moreover, this paper develops a systematic methodology for measurement of sustainability. Twenty world-leading container port cities are selected for this study using contemporary data. The DEA results display their relative differences in levels of sustainable development, which reveal the effectiveness of the prevailing policies in them. Eventually, recommendations are drawn for other port cities by referring to the best practices.     

Spar基础浮式风机系泊系统全耦合分析

本文以OC3 Hywind Spar基础浮式风机为研究对象,采用先进的空气动力-水动力耦合时域分析方法,针对其在中国南海某海域风浪流共同作用下,系泊系统、浮式基础运动以及风机与塔桶载荷响应进行分析。对比了定常风与湍流风模型对浮式风机系泊系统、整体运动响应以及风机载荷的影响。计算结果表明：相比于湍流风,采用定常风进行浮式风机系泊系统分析将得到偏于危险的结果,同时浮式风机运动响应与风机载荷结果偏小。本文建议在系泊系统初始设计阶段采用定常风方法进行设计,在系泊分析阶段采用湍流风进行分析,以保证浮式风机长期服役安全。     

超大型自航抓斗挖泥船作业流程载荷分析

以大型自航抓斗挖泥船为研究对象,建立相应的水动力计算模型。主要研究抓斗挖泥作业不同阶段下船舶运动、锚泊线受力情况以及其随不同环境载荷的变化规律,为船舶安全作业提供依据。研究结果表明,船舶在抓斗旋转和卸料时最为危险,船舶横荡、横摇及各锚泊线张力受其影响很大,实际作业时应尽量保持迎浪状态,进而确保船舶作业安全。     

Comparative Analysis of Calculation Methods for Jacking Force of Jacking Pipes北大核心CSCD

Jacking force is the most important parameter in jacking pipe engineering, and reasonable calculation of jacking forces plays an important role in safe and smooth pipe jacking construction. There are many calculation methods for pipe jacking force at present, and the calculation results may be affected to some extent by different cal⁃ culation methods. For this reason, calculation methods of jacking force (frictional resistance) were collected and a comparative analysis was conducted with aspects to the advantages, disadvantages and applicabilities. The results show that as for the jacking force calculated by empirical formulae, the soil layer classifications corresponding to giv⁃ en frictional force per unit area and relevant factors to be considered are different, and the values of frictional force per unit area between pipe and soil in the same soil layer are also different; as for the jacking force calculated by theo⁃ retical formulae, the calculation methods for vertical earth pressure at crown are different and much effected by the pipe buried depth; as for the jacking force calculated by numerical simulation, the selected theories for the simula⁃ tion program and the construction factors to be considered during simulation are different. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

The role of volume-delay functions in forecasting and evaluating congestion charging schemes: the Stockholm case

This paper uses observations from before and during the Stockkholm congestion charging trial in order to validate and improve a transportation model for Stockholm. The model overestimates the impact of the charges on traffic volumes while at the same time it substantially underestimates the impact on travel times. These forecast errors lead to considerable underestimation of economic benefits which are dominated by travel time savings. The source of error lies in the static assignment that is used in the model. Making the volume-delay functions (VDFs) steeper only marginally improves the quality of forecast but strongly impacts the result of benefit calculations. We therefore conclude that the dynamic assignment is crucial for an informed decision on introducing measures aimed at relieving congestion. However, in the absence of such a calibrated dynamic model for a city, we recommend that at least a sensitivity analysis with respect to the slope of VDFs is performed.