国六柴油机颗粒物捕集器在工程应用中的关键问题分析

通过分析国六排放法规,并结合对OEM(Original Equipment Manufacturer)市场国六后处理技术的开发以及我国的特殊地理环境,总结了国六柴油机颗粒物捕集器(Diesel Particulate Filter,DPF)开发的重点、难点问题.综合来看,开发高目数、薄壁、非对称孔道结构及高强度的DPF...     

独柱墩-固定式防船撞装置波浪荷载研究

以跨海航道桥梁安全为背景,进行独柱墩及独柱墩-固定式防船撞装置结构波浪力研究。开展室内缩尺试验,验证并校准Fluent三维数值模型的准确性和有效性。利用最小二乘法分解墩柱水动力为Morison方程的形式,计算得到结构水动力系数。考虑波浪高度、波浪周期、防撞装置断面形状和大小等影响因素,计算并拟合出墩柱水动力系数与相关因素间的定量关系。研究结果表明：固定式防船撞装置的存在增大了墩柱表面所受波压强,但不改变其总体分布趋势。当防撞装置断面为矩形,且波浪高度较大时,装置对墩柱受力特性的影响最明显。墩柱结构所受水动力中惯性力占主导,且可用均匀分布的惯性力系数来代替实际分布,独柱墩-固定式防船撞装置结构上的惯性力系数可以达到2.1左右。     

一种单片机控制的水温测试系统

由于现代多样的电子控制技术和电子控制理论的迅猛发展,高精度的机械在各类工业控制系统、生产线等方面的需求越来越大.其中以单片机为核心实现的数字控制器,因其体积小、简便易行等优点,而被广泛应用于各行各业.本文将单片机的温度控制系统作为设计核心,通过温度传感器、单片机等软件系统图,并利用软件编程,从而达到实现水温控制的目的....     

Quasi-dynamic estimation of o–d flows from traffic counts: Formulation,statistical validation and performance analysis on real data

The paper proposes a “quasi-dynamic” framework for estimation of origin–destination (o–d) flow from traffic counts, under the assumption that o–d shares are constant across a reference period, whilst total flows leaving each origin vary for each sub-period within the reference period. The advantage of this approach over conventional within-day dynamic estimators is that of reducing drastically the number of unknowns given the same set of observed time-varying traffic counts. Obviously, the gain in accuracy depends on how realistic is the underlying assumption that total demand levels vary more rapidly over time than o–d shares. Firstly, the paper proposes a theoretical specification of the quasi-dynamic estimator. Subsequently, it proposes empirical and statistical tests to check the quasi-dynamic assumption and then compares the performances of the quasi-dynamic estimator of o–d flows with both classical off-line simultaneous dynamic estimators and on-line recursive Kalman filter-based estimators. Experiments are carried out on the real test site of A4–A23 motorways in North-Eastern Italy. Results confirm the acceptability of the assumption of quasi-dynamic o–d flows, even under the hypothesis of constant distribution shares for the whole day and show that the quasi-dynamic estimator outperforms significantly the simultaneous estimator. Data also suggest that using the quasi-dynamic estimates instead of the simultaneous estimates as historical o–d flows improves significantly the performances of the Kalman filter, which strongly depends of the quality of the seed o–d flows. In addition, it is shown that the aggregation of quasi-dynamic o–d estimates across subsequent time slices represents also the most effective way to obtain o–d estimates for larger time horizons (e.g. hourly estimates). Finally, a validation based on an hold-out sample of link flows (i.e. counts not used as inputs in the o–d estimation/updating process) revealed the quasi-dynamic estimator to be overall more robust and effective with respect to the other tested estimators.     

A practical capacity model of a single track line

The paper presents a model for determining the practical capacity of a single track line, i.e. the maximum number of trains which can be run along it in a time unit under the condition that each train enters its bottleneck segment with a definite delay.

The input data used in the model are: geometrical characteristics of the bottleneck segment of the line under study, the intensity and structure of demand expressed by a number of trains which are run over the line in a given time unit, the scenario of traffic running over the line under study and the operational tactics of individual train categories processing on the bottleneck segment.

(Two tactics can be applied in the train processing on the line under study; first, the trains of individual categories are given different priorities in the processing, and second, all the trains have the same priority).

The output results of the model are average delays of trains of each category occurring within the train processing performed on the bottleneck segment of the line under study in a given time unit.     

某特大桥的单梁破坏性试验研究

利用反力框架装置,对某特大桥的拆除旧梁进行破坏性试验,得出各项参数,在此基础上对试验梁进行极限承载能力以及变形能力评价,可供同行参考。     

单相柴油发电机组遥控装置

介绍采用IC和单片机实现对单相柴油发电机组远距离控制。     

单桩荷载传递法修正计算分析

基于层状地基采用双曲线模型为荷载传递函数,提出了用Mindlin解和桩土共同作用的联合方法对荷载传递法的进行修正,并计算分析了单桩承载特性。将Lee的方法与双曲线荷载传递函数相结合使得Lee方法中考虑土体横向连续性的优点得以发挥。将横向连续性与竖向连续性修正相结合得到修正荷载传递法,用编制的计算机程序进行了工程实例的计算,结果表明,计算结果与实测值较为接近,其土层的平均SPT值较小,土体较容易产生变形,当试验荷载较高时,可能造成桩周土与桩身之间的滑移。修正荷载传递法与未修正和仅进行竖向修正的荷载传递法相比具有一定的精确性,能更好地反映单桩承载特性,且适用于群桩的分析计算。     

基于Q学习的Agent在单路口交通控制中的应用

将Agent技术与Q学习算法相结合,应用到城市交通控制领域中,对单交叉口的交通流进行了控制研究,介绍了路口Agent的结构模型以及基于Q学习算法的学习机制的实现,提出了一种适用于交通控制的奖惩函数。即当红灯相位的饱和度大于绿灯相位的饱和度时,红灯相位的相对警界度在奖惩函数中占主导地位,此时大部分情况下会对Agent进行惩罚;在以后的决策过程中面对类似的交通状态Agent所选择的控制行为更倾向于将通行权切换给下一个相位,反之,Agent所选择的行为倾向于保持当前相位的通行权到下一决策时刻。并通过微观交通仿真软件Paramics对控制算法进行仿真研究,仿真结果表明该方法的控制效果优于定时控制,同时验证了奖惩函数的有效性。     

整车试制阶段的电器故障诊断方法

以整车装车与跑车验证案例为背景，讨论汽车开发过程中汽车电器故障诊断的方法，阐述如何应用零部件置换原则来分析故障的重要性等级（significance）。