防抱制动系统基于模型的最佳滑移率计算方法

提出了一种基于μ-λ曲线的近似数学模型来实现最佳滑移率的递推最小二乘算法(RLS)。应用累积求和统计控制法(CUSUM)，解决了RLS算法在检测跃变路面时响应滞后的问题。通过计算机仿真，验证了算法在车辆防抱制动系统中的可行性和有效性。     

山岭重丘区高等级公路改建工程路基施工

以安楚高速公路改建工程十三合同段为例,从技术准备、软土地基、防护及排水工程施工、路基挖方、路基填筑等5个方面重点介绍了山岭重丘区高等级公路改建工程的路基施工.     

Fitness-for-purpose assessment of cracked offshore wind turbine monopile

In this paper, the procedure for flaw acceptability assessment is examined through a case study of a semi-elliptical surface crack in an offshore monopile as it grows till it forms a through thickness crack. Using the procedure prescribed in an industrial standard (BS 7910), the fracture ratio, K_r is shown to increase monotonically with increasing crack depth. The load ratio, L_r, is initially insensitive to the crack depth. However, there is a rapid increase in L_r when the crack depth to thickness ratio exceeds 80%. L_r values obtained from detailed 3D FE limit analysis using elastic-perfectly-plastic material behaviour do not exhibit the asymptotic behaviour predicted by BS 7910 as the flaw transitions from deep crack to through-thickness crack. Furthermore, K_r predicted by BS 7910 is shown to be an over-estimation for the typical dimensions of offshore monopiles. The findings suggest that a structure with a deep flaw may be identified as unacceptable based on BS 7910 when it may still possess a non-trivial amount of structural residual life. This is a concern for monopiles where crack growth as a large flaw forms a significant part of the total life.     

复杂城市环境泥水盾构泥浆绿色处理技术分析

泥水平衡盾构法修建隧道,在施工阶段会产生大量的废浆,如果废浆没有得到科学、妥善的处理,对环境的污染是无法估计的。本文以新建京张高铁清华园隧道工程为依托,结合在城市复杂繁华地区施工场地狭小、泥浆处理难度大等工程难题,对盾构掘进产生的废弃泥浆绿色处理技术进行了适应性研究,分析了综合处理之后泥浆循环利用的应用效果。泥水处理设备、压滤设备及离心设备相结合的泥浆综合处理技术,有效地实现了盾构施工"零排放",为今后类似施工条件的工程提供了技术参考。     

Centrifuge modelling of pipe-soil interaction in clay with crust layer

Seabed in regions, such as the Gulf of Guinea and North West Shelf of Australia, may exhibit a crust layer where the undrained shear strength can be an order of magnitude higher than that of the immediately underlying sediment. This can complicate design of steel catenary risers, where fatigue depends on the cyclic vertical stiffness of the pipe-soil interaction. Potential punch-through of the riser into the underlying soft soil may invalidate design assumptions based on the pipe-soil stiffness within the crust layer. The long-term evolution of pipe-soil stiffness within the crust layer, which exhibits similar properties to an over-consolidated soil, is also poorly understood. This paper describes centrifuge model tests undertaken in a clay sample with a crust layer, simulating the punch-through process of a pipe under load control and investigating the pipe-soil stiffness during long-term cyclic loading tests under displacement control. Results confirm that the potential for punching-through the crust layer depends strongly on the relative ratio of pipe diameter to crust layer thickness. The long-term evolution of pipe-soil stiffness showed a steady increase after an initial remoulding stage in contractile soils (normally consolidated and lightly over-consolidated), but a steady reduction in the heavily over-consolidated, more dilatant, crust. The magnitude of pipe-soil stiffness changes (during both remoulding and reconsolidation) is governed by the over-consolidation ratio of the soil and the amplitude of the cyclic displacements. This study provides insights on the relevant cyclic stiffness to consider when assessing SCR fatigue life in over-consolidated soils and soils exhibiting a superficial crust layer.     

Assessment of fatigue strength of steel butt-welded joints in as-welded condition – Alternative approaches for curve fitting and mean stress effect analysis

Experimental fatigue data for butt-welded joints in as-welded condition and under constant amplitude tensile loading (secondary bending included) were analyzed using the nominal stress system and the notch stress system. Two approaches were used; a standard fitting procedure and minimization of the sum of squared perpendicular distances from a line with a fixed and free slope. In all cases, the latter method gave better agreement between the experimental and predicted fatigue life and fatigue strength. The analyses showed both with all broken specimen data included and with reduced data that the FAT225 curve, as recommended by IIW, might be too optimistic for the notch stress approach in the case of butt-welded joints in as-welded condition. It was also found that use of the local stress ratio instead of the applied stress ratio might explain many issues concerning current observations and apparent inconsistencies in reported literature.     

混凝土在路桥桩基施工中的作用及技术

路桥桩基混凝土施工中，为了保障灌注桩混凝土的质量，必须加强对准备工作及施工工艺的重视。通过对混凝土及其施工质量要求进行分析，探讨了混凝土在路桥桩基施工中的配合比、泵送等，并阐述了路桥桩基施工技术。     

泥浆悬浮砂粒能力分层测定试验研究

为实现泥浆悬浮砂粒能力的量化分析,提出一种分层测定方法,选取12%、15%和18%3种质量分数的试验泥浆,通过自行设计的分层取样装置进行试验研究,获取不同泥浆质量分数、沉降时间和砂粒粒径条件下的10个深度分段的砂粒质量分布,分析各参数影响下的砂粒沉降变化规律。结果表明:1)该分层测定方法可较好地获取不同深度分段的砂粒质量,弥补现有测定方法只能获取底层砂粒沉降质量的不足;2)试验所采用的3种质量分数的泥浆对0.1 mm以上粒径的砂粒悬浮能力均较差。根据砂粒沉降曲线分布特征,提出一种用于判别泥浆悬浮砂粒能力的方法,即砂粒沉降曲线越平缓,各层质量差异性越小,底层质量无明显拐点,不同沉降时间曲线越紧密,则泥浆悬浮砂粒能力越强。     

废弃泥浆在盾构壁后注浆中的应用

在泥水盾构施工过程中不可避免地会产生大量的废弃泥浆,处理泥浆一是需要较高的资金投入,二是可能会对环境造成严重污染。利用废弃泥浆配制壁后注浆砂浆,利用盾构弃浆代替砂浆中的膨润土和水,研究弃浆对壁后注浆砂浆工程性能的影响。结果表明:1)相对体积质量为1.16、黏度为22 s的泥浆配制壁后注浆材料可得到较好的流动性和稠度,并且泌水率优于原配比;2)相对体积质量为1.27、黏度为24 s的泥浆会明显降低砂浆的流动度,对砂浆可泵送能力有一定的影响;3)适当调整水胶比和泥浆相对体积质量,配制壁后注浆材料各方面性能均能达到壁后注浆材料的要求;4)废弃泥浆配制砂浆是一种既经济又环保的弃浆处理回收再利用的工艺工法。