一种商用车铅酸蓄电池状态监控系统的开发

本文介绍一种商用车铅酸蓄电池状态监控系统的开发,系统实现蓄电池传感器实时采集蓄电池状态参数信息,并通过TBOX将数据上传至后台服务器,进行数据存储分析及报警判断,并将亏电报警信息推送给手机客户端,提醒用户注意。同时,系统根据蓄电池SOC值的限值判断,进行电磁开关的切断控制,以保证车辆的正常起动。     

Point-to-point speed enforcement systems: Speed limits design criteria and analysis of drivers’ compliance

Point-to-point (P2P) speed enforcement is a relatively new approach to traffic law enforcement. Its technology allows vehicles whose average speed exceeds the speed limit over the controlled section to be fined. It therefore encourages compliance over distances longer than those where spot enforcement policies have been in place.In this paper, a procedure for consistently setting speed limits with such enforcement systems is proposed. Such a method has been applied to design the speed limits on two motorways in the district of Naples, Italy, where P2P enforcement systems became operational in 2009 and 2010. The speed limits, which were set using the Italian geometric design standard to assess vehicle stability and stopping sight distance, have been compared with those provided by using well-known international standards.The impact of the newly designed speed limits and of the P2P enforcement system on drivers’ speeding behaviour has been quantified for each highway section and vehicle type. In fact, accurate measurements of the average travel speeds of each vehicle crossing the enforced sections, before and after the activation of the system, were available. The migration from the old speed limits with spot speed enforcement to the new approach resulted in a notable increase in drivers’ compliance to the speed limits with a remarkable decrease in both the average of individual speeds and in their standard deviation.In addition, the analysis of 3 years of data shows that a gradual adaptation of drivers’ behaviour to the system took place. In particular, a decreasing compliance to the speed limits points to a non-optimal system management. Finally, the results of a revealed preference survey allowed us to make a behavioural interpretation regarding the significantly different impacts measured on the two motorways.     

对地铁信号系统列车运行速度制约因素的探讨

信号系统是保障地铁运行安全及提高运行效率的重要设备,列车超速防护功能是信号系统一个非常关键的功能。信号系统防护下的列车运行速度由车辆、线路、轨道、限界及信号系统等条件共同决定。由于相关专业对信号系统安全制动模型不了解,在实际工程中易造成"速度浪费"现象。从信号系统安全制动模型的原理出发,对车辆、线路、轨道、限界等专业对列车运行速度的制约因素进行分析,提出建议。     

Plate scanning tools to obtain travel times in traffic networks

The management of vehicle travel times has been shown to be fundamental to traffic network analysis. To collect travel time measurement, some methods focus solely on isolated links or highway segments, and where two measurement points, at the beginning and at the end of a section, are deemed sufficient to evaluate users' travel time. However, in many cases, transport studies involve networks in which the problem is more complex. This article takes advantage of the plate scanning technique to propose an algorithm that minimizes the required number of registering devices and their location in order to identify vehicles candidates to compute the travel times of a given set of routes (or subroutes). The merits of the proposed method are explained using simple examples and are illustrated by its application to the real network of Ciudad Real.     

Travel time estimation oriented freeway sensor placement problem considering sensor failure

Optimal sensor placement on freeway corridor is of great interest to transportation authorities. However, current traffic sensors are easily subject to various failures. Therefore, it is necessary to incorporate sensor failure into the optimal sensor placement model. In this article, a two-stage stochastic model is proposed for the purpose of travel time estimation on freeway corridor. To balance the effectiveness and reliability, a stochastic conditional value at risk (CVaR) model is also proposed. Since both models are too complicated, a customized genetic algorithm is developed. Numerical experiments show that considering sensor failure makes a significant performance improvement in the sensor placement pattern. Sensitivity analysis is also applied to investigate the impact of a number of allowable sensors and different traffic sensor failure probability.     

多元评价体系组合模型在铁路隧道变形预测中的应用

为克服传统预测模型结构单一、预测精度及稳定性不足等缺陷,提出多元体系组合预测模型的建模思路。首先,基于支持向量机、BP神经网络及ARMA模型3种单一预测模型,构建铁路隧道变形预测体系;再以均方根误差、误差平方和及平均绝对误差等为评价准则或指标,构建各预测结果的误差评价体系,求解各单项预测模型的权值贡献指数,得到最优组合权值;然后利用后验差检验、残差检验和关联度检验构建预测精度校验体系,对组合预测结果进行检验,评价预测模型的有效性;最后,结合工程实例,对多元体系组合预测模型在特大断面隧道中的变形预测效果进行检验。结果表明:多元评价体系组合模型预测相对误差值均小于2%,具有较高的预测精度,且较单一预测模型具有更高的预测精度,也一致通过相关检验,验证了多元体系组合预测模型的有效性。     

美国限速制定方法及启示

为使我国道路限速的制定更为合理,借鉴国外相关经验是必不可少的。总结了美国设置限速时考虑的主要因素、限速设置方法及其适用条件。对美国部分城市的州际道路及主干路的限速实施状况进行了分析,认为测速相机等自动执法设备的辅助使用能够在很大程度上提高驾驶人对限速的遵守程度。在借鉴美国限速方法及实施经验的基础上,指出我国在制定道路相关限速标准时,应结合国情确定限制速度与运行速度、设计速度之间的互动关系,以及限速与安全、执法等之间的关系。然后针对不同的道路类型、等级等特性研究采用不同的限速方案,解决速度区限速取值及不同速度区之间如何平滑过渡衔接等问题,明确了我国限速研究的基础性内容。     

双车道公路危险路段评价指标与安全改善对策

选取相邻路段车速差△V、车速降低系数SRC和速度离差作为鉴别双车道公路危险路段的三个评价指标,从道路工程措施和交通安全设施两方面对事故多发路段进行安全改善对策研究。以内蒙古S203公路为例,利用评价指标进行危险路段判析,针对K465＋900急弯陡坡危险路段,通过线形改造以及设置交通标志标线、减速设施、避险车道和防护设施等一系列工程改造措施,进行安全改善综合方案设计。     

互通立交平面线形设计的经验探讨

通过设计工作的实践,探讨互通立交平面线形设计的具体步骤、操作方法和注意事项,并对匝道线元参数的取值、线元参数与运行速度的关系、线形设计的连续性与协调性等方面提出了一些见解。     

湖北城际铁路动车组选型与交路优化研究

以湖北城际铁路为例,通过比照区间运行速度、参考我国高级动车的技术配置合理选择车型,并优化原交路,最终对原、现两种方案的成本效益对比分析,实证表明,该方案有助于减少动车购置成本,降低亏损,并简化原有运输组织工作.