汽车半主动悬架的神经网络自适应控制

本文提出了用两个线性神经网络对汽车半主动悬架系统进行在线辨识和控制的策略，介绍了该控制系统中神经网络的在线训练方法，进行了仿真计算和结果分析。     

汽车主动悬架的最优预见控制

本文针对1/2车辆模型,应用最优预见控制理论对汽车主动悬架进行控制系统的设计和研究。计算机仿真结果表明,所提出的系统能有效改善汽车乘坐舒适性。     

设计-施工总承包在武汉阳逻长江大桥南锚碇工程中的应用

介绍武汉阳逻长江公路大桥南锚碇工程采用设计-施工总承包模式的经验,对相关的招标和项目管理工作进行总结.针对我国的实际情况,分析该模式在工程建设中的适用范围.     

悬索桥索鞍位置的分离计算法

关于索鞍位置计算,已有的计算方法较为繁琐或仅适用于单圆曲线索鞍,针对这种情况,将单圆曲线索鞍位置计算的分离计算法推广到复合圆曲线索鞍位置的计算中,从力学关系和几何关系出发推导得到了复合圆曲线索鞍位置计算的解析公式和由解析公式求解的牛顿-拉斐森迭代算法。改进约束条件,给出合理的迭代初值计算公式,确保了索鞍位置迭代计算快速收敛于真实解。归纳提出了理论顶点的顺延悬链线交点定义法和切线交点定义法的概念,探讨了两种定义法所得的索鞍位置计算公式或计算结果之间的必然联系。算例表明:该精确方法正确可行,近似方法也具有较高的精度,可供悬索桥施工、设计人员参考。     

主动悬架系统对汽车侧翻稳定性改善分析

针对被动悬架系统侧翻稳定性比较差的问题,提出采用主动悬架系统的方法进行改善。通过汽车侧倾运动状态分析,建立了被动悬架系统、主动悬架系统和控制系统模型。模拟分析得到主动悬架系统使得汽车在弯道行驶时的侧倾角有效值下降了92.8%,侧倾角加速度有效值下降了78.2%,侧翻因子有效值下降了92.6%。结果表明:利用主动悬架系统可以有效地降低汽车非直线行驶时的侧倾角以及侧倾角加速度,提高汽车的侧翻稳定性,是提高汽车非直线行驶状态下安全性的一个合理的解决方案。     

A multi-spring model for monopile analysis in soft clays

The offshore wind industry in China has seen a rapid development in recent years and is projected to account for half of global yearly installed capacity in the years to come. Monopiles are a popular foundation solution for supporting offshore wind turbines. However, due to challenging seabed soil conditions, which often feature thick normally consolidated soft clays and harsh environmental loading (i.e. frequent occurrence of typhoons), extremely long monopiles are often designed. The large monopiles are costly to fabricate and install and sometimes kills the viability of the concept in cases where the bedrock is relatively shallow and expensive piling in rock is otherwise required. However, the state-of-practice for designing these monopiles in clays is typically by using the API p-y springs, which are widely known to underestimate soil-pile interaction stiffness and capacity for large diameter monopiles. Improvement to the design method can therefore have significant economic implications to the industry. The paper presents an effort toward this direction. A multi-spring beam-column model suitable for monopile design in soil conditions in China is proposed. The model features three soil spring components, namely the lateral p-y spring, the pile tip base shear s-y spring and rotational m-θ springs along the pile shaft. The validity of the model is verified by a comprehensive suite finite element parametric analyses. Guidance for incorporating the cyclic loading effect into design is also provided. The model proposed in this paper has large potentials for application in design practice.     

泥浆悬浮砂粒能力分层测定试验研究

为实现泥浆悬浮砂粒能力的量化分析,提出一种分层测定方法,选取12%、15%和18%3种质量分数的试验泥浆,通过自行设计的分层取样装置进行试验研究,获取不同泥浆质量分数、沉降时间和砂粒粒径条件下的10个深度分段的砂粒质量分布,分析各参数影响下的砂粒沉降变化规律。结果表明:1)该分层测定方法可较好地获取不同深度分段的砂粒质量,弥补现有测定方法只能获取底层砂粒沉降质量的不足;2)试验所采用的3种质量分数的泥浆对0.1 mm以上粒径的砂粒悬浮能力均较差。根据砂粒沉降曲线分布特征,提出一种用于判别泥浆悬浮砂粒能力的方法,即砂粒沉降曲线越平缓,各层质量差异性越小,底层质量无明显拐点,不同沉降时间曲线越紧密,则泥浆悬浮砂粒能力越强。     

A signal-based fault detection and classification method for heavy haul wagons

This paper proposes a signal-based fault detection and isolation (FDI) system for heavy haul wagons considering the special requirements of low cost and robustness. The sensor network of the proposed system consists of just two accelerometers mounted on the front left and rear right of the carbody. Seven fault indicators (FIs) are proposed based on the cross-correlation analyses of the sensor-collected acceleration signals. Bolster spring fault conditions are focused on in this paper, including two different levels (small faults and moderate faults) and two locations (faults in the left and right bolster springs of the first bogie). A fully detailed dynamic model of a typical 40t axle load heavy haul wagon is developed to evaluate the deterioration of dynamic behaviour under proposed fault conditions and demonstrate the detectability of the proposed FDI method. Even though the fault conditions considered in this paper did not deteriorate the wagon dynamic behaviour dramatically, the proposed FIs show great sensitivity to the bolster spring faults. The most effective and efficient FIs are chosen for fault detection and classification. Analysis results indicate that it is possible to detect changes in bolster stiffness of ±25% and identify the fault location.     

自锚式斜拉-悬索协作体系桥静风响应分析

自锚式斜拉-悬索协作体系桥作为一种全新的结构体系,兼备了自锚式悬索桥和斜拉桥的许多优点,结构体系则更为复杂。结合400m主跨的金州海湾大桥这一实际工程方案,建立了有限元空间分析模型,分析了其在静风荷载作用下的非线性行为,总结了初始攻角、附加攻角等参数及是否考虑缆索系统承受风荷载等对体系的影响规律。     

浅谈自锚式悬索桥的设计

通过对某主桥跨径为30m 72 m 30 m的自锚式悬索桥的计算、分析与评价,介绍该类桥梁设计的构思和受力特性,为同类桥型的推广提供技术参考.