在役码头桩基承载力静载试验

传统在役码头的桩基承载力检测需拆除上部结构,使得检测工作量大且工期较长。以某旧码头桩基检测工程为依托,阐述在保持上部结构完整的情况下,快速准确检测桩基承载力的方法。首先通过数值模拟分析上部结构与桩基荷载分担比例,初步确定试验堆载量。同时在码头下部的桩头安装传感器,加载过程中能较精确的测得桩顶的实际荷载。用该方法顺利地对该码头2根桩承载力进行检测,取得了较好的效果。     

A competing Markov model for cracking prediction on civil structures

Cracks on the surface of civil structures (e.g. pavement sections, concrete structures) progress in several formations and under different deterioration mechanisms. In monitoring practice, it is often that cracking type with its worst damage level is selected as a representative condition state, while other cracking types and their damage levels are neglected in records, remaining as hidden information. Therefore, the practice in monitoring has a potential to conceal with a bias selection process, which possibly result in not optimal intervention strategies. In overcoming these problems, our paper presents a non-homogeneous Markov hazard model, with competing hazard rates. Cracking condition states are classified in three types (longitudinal crack, horizontal crack, and alligator crack), with three respective damage levels. The dynamic selection of cracking condition states are undergone a competing process of cracking types and damage levels. We apply a numerical solution using Bayesian estimation and Markov Chain Monte Carlo method to solve the problem of high-order integration of complete likelihood function. An empirical study on a data-set of Japanese pavement system is presented to demonstrate the applicability and contribution of the model.     

土体中应力分布基本规律的探讨

基于土体的颗粒结构和只有颗粒接触传递应力的特性，对不同姿态颗粒接触中应力传递的机理分析，揭示了土体在相对静态下存在主动力的应力扩散效应和强被动力的应力集中效应，及其形成的土体中应力分布基本规律。主动力的应力场是以其所在土层的应力扩散角θ向外扩散的园锥形应力范围，在应力场内应力扩散分布，主应力方向不变，且伴有与之垂直的法向应力，应力分布均衡了应力场内颗粒和支承面的位移趋势。强被动力的支承面上存在以θ角向外扩散倒锥台形的应力平衡范围，在此范围内反向应力集中作用到强支承面，强支承面主导了其所在应力场的应力分布。土拱效应是应力集中效应的衍生效应，是相邻的同向强支承反力的应力平衡范围发生重迭时产生的现象。     

某出口米轨动车组(Tc车)车体设计及试验对比研究

介绍了使用大型通用计算机辅助工程软件ANSYS和有限元方法,对某出口米轨动车组(Tc车)进行了分析计算的过程,并通过实际物理样机试验数据与计算数据的比对,分析车身强度的可靠性。     

Non-fragile multi-objective static output feedback control of vehicle active suspension with time-delay

This paper presents an approach to design a delay-dependent non-fragile H_∞/L₂–L_∞ static output feedback (SOF) controller for active suspension with input time-delay. The control problem of quarter-car active suspension with actuator time-delay is formulated to a H_∞/L₂–L_∞ control problem. By employing a delay-dependent Lyapunov function, new existence conditions of delay-dependent non-fragile SOF H_∞ controller and L₂–L_∞ controller are derived, respectively, in terms of the feasibility of bilinear matrix inequalities (BMIs). Then, a procedure based on linear matrix inequality optimisation and a hybrid algorithm of the particle swarm optimisation and differential evolution is used to solve an optimisation problem with BMI constraints. Design and simulation results of non-fragile H_∞/L₂–L_∞ controller for active suspension show that the designed controller not only can achieve the optimal performance and stability of the closed-loop system in spite of the existence of the actuator time-delay, but also has significantly improved the non-fragility characteristics over controller perturbations.     

新建结构与运营地铁车站接驳关键技术

以深圳地铁新建3号线老街站换乘综合体与运营地铁车站接驳工程为实例,对运营车站临时加固防护、分部切割既有结构、新旧结构接驳等关键技术展开论述。提出运用金刚石绳锯与金刚石水钻相结合的一种静力切割工艺,很好地解决了该工程作业环境复杂、技术要求高、风险大等难题,安全、高效地完成了新建结构与运营地铁车站接驳工程。     

碱矿渣胶凝材料的开裂性能研究

碱矿渣胶凝材料是具有高强、高耐久性的胶凝材料,但其收缩大,易开裂,是阻碍其广泛应用的主要原因.通过圆环法研究了MgO膨胀剂、聚丙烯纤维和减缩剂单掺或复掺对碱矿渣胶凝材料开裂性能的影响.研究结果表明:单掺MgO膨胀剂对碱胶凝体系抗裂不利,减缩剂和聚丙烯纤维的掺入能够有效延缓裂缝的形成,减小开裂面积.     

T91与钢102异种钢焊接接头氢致裂纹研究

用甘油法分别测定了CM-9Cb、R347和国内新研制的T91专用焊条熔敷金属中的护散氢含量，通过阴极电解渗氢和定载延迟开裂试验，研究了选用不同焊条焊接时、T91与钢102异种钢接头的氢致裂纹倾向，确定了临界启裂应力。     

基于超高速AD9954的多模式信号的实现

通过对AD9954采用先进DDS技术性能特点的具体分析，利用其可编程幅度、频率、相位给出AD9954在高速调制信号系统中的应用方案，从而较方便容易地实现基于软件无线电技术的各种调制信号。     

船舶静电防护

分析船舶静电产生的机理,针对船舶静电危害产生的多种情况,提出设备接地、液体防护、传送带及人体静电防护等防止静力产生的措施。